Leagoo M8 Pro Firmware Flash File Download [Stock Rom]

The Leagoo M8 Pro was a budget-friendly 4G phablet from 2017, notable for its large 5.7-inch HD display and a dual-camera setup. It was powered by a MediaTek MT6737M quad-core processor, equipped with 2GB of RAM, 16GB of storage, and a 3500mAh battery. The device ran on Android 6.0 Marshmallow, skinned with Leagoo’s Freeme OS 6.0. While it offered a large screen experience at a low price, its performance was not always smooth, and like many budget devices, it is prone to software degradation over time. For owners looking to restore performance or fix software bugs, a clean firmware installation is the most effective solution.

This guide provides two official stock ROM packages for the Leagoo M8 Pro, including the latest available build from June 2017.

Leagoo M8 Pro Firmware Details

Below are the key specifications for the Leagoo M8 Pro. Both firmware versions will restore the device to its original Android 6.0 Marshmallow software.

Why Flash the Stock Firmware on Your Leagoo M8 Pro?

Flashing the stock firmware is the best way to address common software problems and restore the original performance of the device:

• Fix Performance Lag: Reviews and user feedback noted that the device could be slow. A clean OS install is the best way to handle the system-wide lag that develops from software bloat and accumulated data.
• Improve Fingerprint Scanner Speed: Some users found the fingerprint scanner to be slow. Reinstalling the official firmware ensures the latest drivers are properly installed, which can improve sensor performance.
• Remove Bloatware: Leagoo’s Freeme OS included pre-installed apps. A clean flash can provide a bloat-free experience and free up valuable system resources.
• Stop App Crashes: Solves persistent “force close” errors and instability caused by software conflicts.
• Fix Bootloop Errors: The only reliable method to fix a phone that is stuck on the Leagoo startup logo and will not boot.
• Unbrick Your Device: Can revive a phone that has become completely unresponsive due to a software error.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This process will completely erase all data from the phone’s internal storage.

• The latest version of the SP Flash Tool.
• The correct MediaTek VCOM USB drivers installed on your PC.

Download Official Firmware for Leagoo M8 Pro

• Build Date: 20170623 (Latest & Recommended)
  • File Name: Leagoo_M8_Pro_MT6737M_20170623_6.0.zip
  • Size: 1 GB
  • 🔗 Download Link: Download (MediaFire)
• Build Date: 20170508 (Older Version)
  • File Name: Leagoo_M8_Pro_MT6737M_20170508_6.0.zip
  • Size: 1.1 GB
  • 🔗 Download Link: Download (MediaFire)

How to Flash the Firmware

This firmware must be installed using the SP Flash Tool. The process involves loading a scatter file from the downloaded firmware. Here is a summary of the steps:

1. Download and extract your chosen firmware file to a new folder on your computer.
2. Ensure the MediaTek VCOM USB drivers are properly installed on your PC.
3. Launch the SP Flash Tool software.
4. Click the “Scatter-loading” button and select the MT6737M_Android_scatter.txt file from the extracted firmware folder.
5. Completely power off your Leagoo M8 Pro.
6. In SP Flash Tool, confirm the mode is set to “Download Only,” then click the green “Download” button.
7. Connect your powered-off phone to the computer via USB cable to begin the flashing process.

For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: Flashing firmware is an advanced procedure that carries inherent risks. If instructions are not followed precisely, you could permanently damage your device. We are not responsible for any data loss or hardware issues. Proceed with caution.