Leagoo M13 Firmware Flash File Download [Stock Rom]

Download Leagoo M13 Stock Firmware (Official ROM)

The Leagoo M13 was a budget smartphone from 2019 that offered an impressive set of features for its price point. It came equipped with a modern 6.1-inch waterdrop display, a capable MediaTek Helio A22 (MT6761) processor, a generous 4GB of RAM, and 32GB of storage, all running on Android 9.0 Pie. While the on-paper specifications were excellent, budget devices can still suffer from software optimization issues, leading to performance lag, app crashes, and bloatware over time. For users experiencing these problems, reinstalling the official stock firmware is the most effective way to restore the device to its smooth, factory-fresh state.

Note: The firmware filename contains “OS6.0,” which is an internal manufacturer version number. The actual operating system for this device and firmware is Android 9.0 Pie.

Leagoo M13 Firmware Details

Below are the key specifications for the Leagoo M13. This firmware will restore the device to its original Android 9.0 Pie software.

Why Flash the Stock Firmware on Your Leagoo M13?

Flashing the stock firmware can resolve a variety of software issues and restore the snappy performance of the Leagoo M13:

• Fix Performance Lag: Even with 4GB of RAM, unoptimized software can cause stuttering and slowdowns. A clean install restores the device’s original speed.
• Stop Constant App Crashes: Solves persistent “force close” errors and instability caused by software conflicts or memory management issues.
• Remove Bloatware: Leagoo devices were sometimes criticized for pre-installed apps. A clean flash provides a bloat-free experience.
• Resolve Abnormal Battery Drain: Can fix software bugs that cause the 3000mAh battery to drain faster than expected.
• Fix Bootloop Errors: The only reliable method to fix a phone that is stuck on the Leagoo startup logo and will not boot.
• Unbrick Your Device: Can revive a phone that has become completely unresponsive due to a software error.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This process will completely erase all data from the phone’s internal storage.

• The latest version of the SP Flash Tool.
• The correct MediaTek VCOM USB drivers installed on your PC.

Download Official Firmware for Leagoo M13

• Build Date: 20190413
  • File Name: Leagoo_M13_MT6761_OS6.0_20190413.zip
  • Size: 1.45 GB
  • 🔗 Download Link: Download (MediaFire)

How to Flash the Firmware

This firmware must be installed using the SP Flash Tool. The process involves loading a scatter file from the downloaded firmware. Here is a summary of the steps:

1. Download and extract the Leagoo_M13_..._20190413.zip file to a new folder on your computer.
2. Ensure the MediaTek VCOM USB drivers are properly installed on your PC.
3. Launch the SP Flash Tool software.
4. Click the “Scatter-loading” button and select the MT6761_Android_scatter.txt file from the extracted firmware folder.
5. Completely power off your Leagoo M13.
6. In SP Flash Tool, confirm the mode is set to “Download Only,” then click the green “Download” button.
7. Connect your powered-off phone to the computer via USB cable to begin the flashing process.

For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: Flashing firmware is an advanced procedure that carries inherent risks. If instructions are not followed precisely, you could permanently damage your device. We are not responsible for any data loss or hardware issues. Proceed with caution.