Leagoo M10 Firmware Flash File Download [Stock Rom]

The Leagoo M10 was a 2019 ultra-budget smartphone that pushed the limits of low-end hardware, pairing a MediaTek MT6739 processor with an extremely restrictive 1GB of RAM. While it ran a relatively modern version of Android 8.1 Oreo, this combination resulted in a deeply flawed and frustrating user experience. The phone is known to suffer from severe, system-wide performance issues, including significant input lag, where the screen visibly struggles to keep up with user touches and swipes. More critically, the underpowered hardware often leads to kernel panics or system instability, causing the device to freeze and then restart itself without warning, a problem often made worse when the small 2850mAh battery is low. For anyone attempting to use this phone, reinstalling the stock firmware is an essential measure to clean out software cruft and restore the operating system to its most basic, functional state.

This guide provides the official stock ROM package for the Leagoo M10, allowing you to perform a complete reinstallation of the Android OS.

Leagoo M10 Firmware Details

Below are the key specifications for this Leagoo M10 firmware. This will restore the device to its Leagoo OS 3.0 software, based on Android 8.1 Oreo. This is a MediaTek MT6739 device and requires the SP Flash Tool.

Why Flash the Stock Firmware on Your Leagoo M10?

A full firmware reinstallation is the most direct method for tackling the deep-seated stability issues of this phone:

• Stop Unpredictable Reboots: If your phone constantly restarts on its own, especially when the battery level is low, it points to system instability. Reinstalling the OS can fix the software corruption that triggers these random restarts.
• Alleviate Crippling Lag: The most immediate benefit is a temporary fix for the extreme slowness and delayed touch response caused by the 1GB of RAM struggling to run Android 8.1. A clean install provides a fresh start without any resource-hogging background processes.
• Fix the “Cannot Connect to Camera” Error: If opening the camera app results in a black screen or an error message, it’s often a software glitch where the OS loses its connection to the camera hardware. A full firmware re-flash can restore this link.
• Resolve Faulty Bluetooth and Wi-Fi: For devices that refuse to turn on Wi-Fi or Bluetooth, or cannot maintain a stable connection, reinstalling the firmware and its baseband drivers can fix software-level connectivity failures.
• Break Out of a Bootloop State: If the phone is permanently frozen on the Leagoo animation during startup, its operating system is critically damaged. The only way to make the device usable again is to manually reinstall the firmware via a PC.
• Recover an Unresponsive Device: In a worst-case scenario where the phone shows no signs of life (a “soft brick”), forcing a firmware flash is the last resort to see if the device can be revived from its crashed state.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This procedure will permanently delete everything on the phone.

• The latest version of the SP Flash Tool.
• The correct MediaTek VCOM USB drivers installed on your PC.

Download Official Firmware for Leagoo M10

• Build Date: 2019-02-19
  • File Name: Leagoo_M10_MT6739_OS3.0_E_20190219.zip
  • Size: 829MB
  • 🔗 Download Link: Download (Google Drive)

How to Flash the Firmware

This firmware must be installed using the SP Flash Tool on a Windows or Linux computer. The process requires loading the “scatter” file contained within the firmware package. Here is a brief overview:

1. Download and extract the Leagoo_M10_..._20190219.zip file to a new folder.
2. Install the required MediaTek VCOM USB drivers on your computer.
3. Launch the SP Flash Tool software (flash_tool.exe).
4. Click the “Scatter-loading” button and select the MT6739_Android_scatter.txt file from the extracted firmware folder.
5. Completely power off your Leagoo M10.
6. Ensure the dropdown menu in SP Flash Tool is set to “Download Only” and click the green “Download” arrow.
7. Connect the powered-off phone to your PC via a USB cable to initiate the flashing process.

For a complete, step-by-step tutorial with screenshots and essential troubleshooting tips, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: This is an advanced procedure that will erase all your data and carries the risk of permanently damaging your device if not done correctly. We are not responsible for any data loss or hardware failures. Proceed with caution.