Leagoo M-Pad 10 Firmware Flash File Download [Stock Rom]

Download Leagoo M-Pad 10 Stock Firmware (Official ROM)

The Leagoo M-Pad 10 was a budget-friendly 10.1-inch tablet from 2017, designed primarily for media viewing on its large screen. To keep costs low, it was equipped with very modest hardware: a MediaTek MT6580 quad-core processor and a limited amount of RAM (likely 1GB or 2GB). This entry-level chipset struggles to power a large display, leading to significant performance issues such as severe lag, slow response times, and app crashes. For owners of this tablet, reinstalling the official stock firmware is the most effective way to perform a factory reset and restore a baseline level of performance.

This guide provides the official stock ROM package for the Leagoo M-Pad 10, allowing you to perform a clean software installation.

Leagoo M-Pad 10 Firmware Details

Below are the key specifications for the Leagoo M-Pad 10. This firmware will restore the device to its original Android 5.1 Lollipop software.

Why Flash the Stock Firmware on Your Leagoo M-Pad 10?

Flashing the stock firmware is essential for addressing the critical performance issues caused by the tablet’s underpowered hardware:

• Fix Extreme Performance Lag: This is the most important reason to flash. A clean OS install is the only way to address the severe system-wide lag caused by the MT6580 processor struggling to power a large 10.1-inch display.
• Improve System Stability: A clean flash can fix issues that lead to constant app crashes or system freezes, which are common when the limited hardware is overwhelmed.
• Resolve Abnormal Battery Drain: Can fix software bugs that cause the battery to drain faster than expected, helping to restore its intended lifespan.
• Remove Viruses and Malware: If your tablet has been infected with malware, a full firmware flash is the only way to guarantee its complete removal.
• Fix Bootloop Errors: The definitive solution for a tablet that is stuck on the Leagoo startup logo and fails to boot.
• Unbrick Your Device: Can revive a tablet that has become completely unresponsive due to a software error.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This process will completely erase all data from the tablet’s internal storage.

• The latest version of the SP Flash Tool.
• The correct MediaTek VCOM USB drivers installed on your PC.

Download Official Firmware for Leagoo M-Pad 10

• Build Date: 20170313
  • File Name: Leagoo_M-Pad_10_MT6580_20170313.zip
  • Size: 598 MB
  • 🔗 Download Link: Download (Google Drive)

How to Flash the Firmware

This firmware must be installed using the SP Flash Tool. The process involves loading a scatter file from the downloaded firmware. Here is a summary of the steps:

1. Download and extract the Leagoo_M-Pad_10_MT6580_20170313.zip file to a new folder on your computer.
2. Ensure the MediaTek VCOM USB drivers are properly installed on your PC.
3. Launch the SP Flash Tool software.
4. Click the “Scatter-loading” button and select the MT6580_Android_scatter.txt file from the extracted firmware folder.
5. Completely power off your Leagoo M-Pad 10.
6. In SP Flash Tool, confirm the mode is set to “Download Only,” then click the green “Download” button.
7. Connect your powered-off tablet to the computer via USB cable to begin the flashing process.

For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: Flashing firmware is an advanced procedure that carries inherent risks. If instructions are not followed precisely, you could permanently damage your device. We are not responsible for any data loss or hardware issues. Proceed with caution.