Leagoo Kiicaa Power Firmware Flash File Download [Stock Rom]

The Leagoo Kiicaa Power was a budget “battery phone” from 2017, designed to offer exceptional endurance with its massive, removable 4000mAh battery. It featured a 5-inch HD display, a MediaTek MT6580A processor, and a solid 2GB of RAM, all running on Android 7.0 Nougat. While its battery was a major selling point, some users reported software issues with the initial release, including UI bugs and screen flickering. For users facing these problems or simply looking to ensure their device is as stable as possible, installing the latest official firmware is the best solution.

This guide provides two official stock ROM packages for the Leagoo Kiicaa Power, including the latest revised “R2” build from January 2018 which contains important bug fixes.

Leagoo Kiicaa Power Firmware Details

Below are the key specifications for the Leagoo Kiicaa Power. Both firmware versions will restore the device to its original Android 7.0 Nougat software.

Why Flash the Stock Firmware on Your Kiicaa Power?

Flashing the latest R2 firmware is the most effective way to address the specific bugs and general performance issues of this device:

• Fix UI Bugs and Screen Flickering: The most important reason to flash the updated R2 firmware is to fix reported bugs from the original software, such as “System UI issues and screen blinking lines.”
• Resolve Abnormal Battery Drain: A clean OS install can fix software bugs and remove rogue processes that cause the massive 4000mAh battery to drain faster than it should, restoring the phone’s primary feature.
• Improve System Performance: A fresh firmware installation removes accumulated junk files and restores the device’s original speed and responsiveness.
• Remove Malware and Viruses: If your device has been infected, a full firmware flash is the only way to guarantee complete removal of any security threats.
• Fix Bootloop Errors: The only reliable method to fix a phone that is stuck on the Leagoo startup logo.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This process will completely erase all data from the phone’s internal storage.

• The latest version of the SP Flash Tool.
• The correct MediaTek VCOM USB drivers installed on your PC.

Download Official Firmware for Leagoo Kiicaa Power

• • Build Date: 20180129 (R2 – Latest & Recommended)
    • File Name: Leagoo_Kiicaa_Power_MT6580_R2_20180129.zip
    • Size: 1.17 GB
    • 🔗 Download Link: Download (MediaFire)

• Build Date: 20170915 (Older Version)
  • File Name: Leagoo_Kiicaa_Power_MT6580_20170915_7.0.zip
  • Size: 1.12 GB
  • 🔗 Download Link: Download (MediaFire)

How to Flash the Firmware

This firmware must be installed using the SP Flash Tool. The process involves loading a scatter file from the downloaded firmware. Here is a summary of the steps:

1. Download and extract your chosen firmware file to a new folder on your computer.
2. Ensure the MediaTek VCOM USB drivers are properly installed on your PC.
3. Launch the SP Flash Tool software.
4. Click the “Scatter-loading” button and select the MT6580_Android_scatter.txt file from the extracted firmware folder.
5. Completely power off your Leagoo Kiicaa Power.
6. In SP Flash Tool, confirm the mode is set to “Download Only,” then click the green “Download” button.
7. Connect your powered-off phone to the computer via USB cable to begin the flashing process.

For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: Flashing firmware is an advanced procedure that carries inherent risks. If instructions are not followed precisely, you could permanently damage your device. We are not responsible for any data loss or hardware issues. Proceed with caution.