The Leagoo Elite 5 was a mid-range smartphone from 2015 that stood out for its massive 4000mAh battery, which also featured a reverse charging function, allowing it to be used as a power bank. It was well-equipped for its era, boasting a large 5.5-inch HD display, a 64-bit MediaTek MT6735M processor, and 2GB of RAM. However, the Android 5.1 Lollipop operating system it ran was known to cause various software issues on some devices, including battery drain and connectivity problems. For owners facing these issues, a clean installation of the official stock firmware is the best way to restore the device’s stability and signature battery life.
This guide provides the official stock ROM package for the Leagoo Elite 5, allowing you to perform a complete software reinstallation to fix these known issues.
Leagoo Elite 5 Firmware Details
Below are the key specifications for the Leagoo Elite 5. This firmware will restore the device to its original Android 5.1 Lollipop software.
| Attribute | Details |
|---|---|
| 📱 Device | Leagoo Elite 5 |
| 🆔 Chipset | MediaTek MT6735M |
| 🤖 Android OS | 5.1 Lollipop |
| 📂 File Type | Scatter Firmware |
| 💻 Flashing Tool | SP Flash Tool |
Why Flash the Stock Firmware on Your Leagoo Elite 5?
Flashing this official stock ROM is the best way to address the specific, widely-reported issues associated with the Android 5.1 update:
- Fix Abnormal Battery Drain: A clean installation of this **Android 5.1 firmware** is the best way to resolve software bugs that cause the massive 4000mAh battery to drain faster than expected, restoring the phone’s main selling point.
- Resolve Wi-Fi Connectivity Issues: Users of other phones with this OS version reported problems where Wi-Fi would fail to connect or reconnect automatically. A fresh firmware installation can fix these software-related connectivity problems.
- Improve System Performance: By reinstalling the original, optimized operating system, you can eliminate the lag and stuttering that develops over time from software bloat and corrupted cache files.
- Fix Fingerprint Scanner Problems: Some users reported that fingerprint sensors became unreliable after the 5.1.1 update. A clean installation of this **Android 5.1 ROM** can help resolve software-related sensor issues.
- Fix Bootloop Errors: The only reliable method to fix a phone that is stuck on the Leagoo startup logo and will not boot.
⚠️ Important Prerequisites
Before you begin, back up any accessible data. This process will completely erase all data from the phone’s internal storage.
- The latest version of the SP Flash Tool.
- The correct MediaTek VCOM USB drivers installed on your PC.
Download Official Firmware for Leagoo Elite 5
- Build Date: Unknown
- File Name: Leagoo_Elite_5_MT6735M_5.1.zip
- Size: 835 MB
- 🔗 Download Link: Download (MediaFire)
How to Flash the Firmware
This firmware must be installed using the SP Flash Tool. The process involves loading a scatter file from the downloaded firmware. Here is a summary of the steps:
- Download and extract the
Leagoo_Elite_5_MT6735M_5.1.zipfile to a new folder on your computer. - Ensure the MediaTek VCOM USB drivers are properly installed on your PC.
- Launch the SP Flash Tool software.
- Click the “Scatter-loading” button and select the
MT6735M_Android_scatter.txtfile from the extracted firmware folder. - Completely power off your Leagoo Elite 5.
- In SP Flash Tool, confirm the mode is set to “Download Only,” then click the green “Download” button.
- Connect your powered-off phone to the computer via USB cable to begin the flashing process.
For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:
→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones
Disclaimer: Flashing firmware is an advanced procedure that carries inherent risks. If instructions are not followed precisely, you could permanently damage your device. We are not responsible for any data loss or hardware issues. Proceed with caution.
