Leagoo Elite 1 Firmware Flash File Download [Stock Rom]

The Leagoo Elite 1 was a premium mid-range smartphone from 2015 that offered a high-end design and strong specifications at an affordable price. It featured a durable metal and glass construction, a sharp 5.0-inch Full HD display, a powerful MediaTek MT6753 octa-core processor, and a generous 3GB of RAM. While the phone was well-received, some users reported that later over-the-air (OTA) software updates introduced significant problems, including severe battery drain and the installation of malware. For owners facing these issues, downgrading to a clean, official factory firmware is the only way to restore the device’s performance and security.

This guide provides an early, clean, official stock ROM for the Leagoo Elite 1, allowing you to fix these documented software problems.

Leagoo Elite 1 Firmware Details

Below are the key specifications for the Leagoo Elite 1. This firmware will restore the device to a stable version of Android 5.1 Lollipop.

Why Flash the Stock Firmware on Your Leagoo Elite 1?

Flashing this official V1.3.1 factory ROM is the best way to resolve specific, user-reported issues caused by later OTA updates:

• Fix Severe Battery Drain: Flashing this clean Android 5.1 build can resolve the drastic battery drain issue reported by users after installing later OTA updates, restoring the phone’s battery life from just 4 hours back to its original 8-9 hours of use.
• Remove Potential Malware: This original firmware is free of the malicious “CallerIdSearch.apk” application that was reportedly bundled with the S160225 OTA update, securing your device from unwanted software.
• Resolve Fingerprint Scanner Issues: Users of other devices with Android 5.1.1 reported that the fingerprint scanner became unreliable. A clean installation of this V1.3.1 ROM can help fix software-related sensor problems.
• Improve System Performance: By reinstalling the original, optimized factory operating system, you can eliminate the lag and stuttering that develops from years of software updates and data clutter.
• Fix Bootloop Errors: The only reliable method to fix a phone that is stuck on the Leagoo startup logo and will not boot.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This process will completely erase all data from the phone’s internal storage.

• The latest version of the SP Flash Tool.
• The correct MediaTek VCOM USB drivers installed on your PC.

Download Official Firmware for Leagoo Elite 1

• Build Date: S1019 (October 2015)
  • File Name: Leagoo_Elite_1_MT6753_V1.3.1_S1019_5.1.zip
  • Size: 1 GB
  • 🔗 Download Link: Download (MediaFire)

How to Flash the Firmware

This firmware must be installed using the SP Flash Tool. The process involves loading a scatter file from the downloaded firmware. Here is a summary of the steps:

1. Download and extract the Leagoo_Elite_1_..._5.1.zip file to a new folder on your computer.
2. Ensure the MediaTek VCOM USB drivers are properly installed on your PC.
3. Launch the SP Flash Tool software.
4. Click the “Scatter-loading” button and select the MT6753_Android_scatter.txt file from the extracted firmware folder.
5. Completely power off your Leagoo Elite 1.
6. In SP Flash Tool, confirm the mode is set to “Download Only,” then click the green “Download” button.
7. Connect your powered-off phone to the computer via USB cable to begin the flashing process.

For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: Flashing firmware is an advanced procedure that carries inherent risks. If instructions are not followed precisely, you could permanently damage your device. We are not responsible for any data loss or hardware issues. Proceed with caution.