The Kimfly M10 is an entry-level Android phone built on a Spreadtrum platform, but suffers from issues like stuck logo, bootloop, dead device after update, FRP lock, app crashes, and random freezing. Users also report touchscreen or battery glitches, malware infection, and network/IMEI loss after failed flashing. Installing official Kimfly M10 SPD firmware recovers a bricked phone, removes persistent bugs, and restores original performance.
This firmware is SPD-tested and recovers dead/bootloop M10 devices, wipes malware, restores lost IMEI/network (if hardware intact), and fixes problems that remain after factory reset. Always match your version and take a full data backup before flashing.
Kimfly M10 Firmware Details
| Device Name | Kimfly M10 |
| Model | M10 |
| Chipset | Spreadtrum/Unisoc SC7731C, Quad-core 1.3GHz |
| GPU | Mali-400 |
| Android Version | Android 6.0 Marshmallow |
| RAM / Storage | 1GB RAM / 8GB ROM (expandable) |
| Display | 5.0-inch FWVGA, 480×854 pixels |
| Camera | Rear: 5MP (LED), Front: 2MP |
| Battery | 2200 mAh (removable) |
| SIM | Dual SIM |
| Firmware Version | V2.0_20170527_6.0_SPD |
| Build Date | May 27, 2017 |
| File Size | 756MB |
| File Type | ZIP (PAC file inside) |
| Flashing Tool | SPD Upgrade Tool (ResearchDownload) |
| Region | Global, Africa, Asia |
⚠ Warning: Use this firmware only for Kimfly M10 SC7731C models. Incorrect firmware or interrupted flashing can brick your device or erase IMEI. Always back up user data as flashing will wipe all files.
Download Official Firmware for Kimfly M10
Use this firmware to fix:
- Bootloop, stuck logo, or dead device
- FRP/Google lock or forgotten pattern
- Malformed system, IMEI/network loss after flash
- Screen, battery, or camera bugs
📄 Filename: Kimfly_M10_V2.0_20170527_6.0_SPD.zip
📦 Size: 756MB
🗓️ Build Date: May 27, 2017
🔢 Firmware Version: V2.0_20170527_6.0_SPD
🤖 Android Version: 6.0 Marshmallow
⬇️ Download Link: Google Drive (Direct Download)
How to Flash the Firmware
To flash your Kimfly M10 safely using SPD tool:
- Extract the ZIP file and install Spreadtrum USB drivers plus SPD Upgrade Tool on your PC.
- Open SPD Upgrade Tool, load the included PAC file from the extracted folder.
- Switch off your device, connect to PC (hold Volume Down if needed).
- Press “Start” in SPD Upgrade Tool. Wait for green PASSED message.
- Disconnect and reboot your M10. Test for network, IMEI, and full stability.
Follow the illustrated SPD flash guide at this link for details.
