Looking to install the stock ROM on your iBall Slide Q400X Plus? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
This file is strictly for the iBall Slide Q400X Plus.
Downloads:
Firmware name: iBall_Slide_Q400X_Plus_20180410_PS.zip
iBall Model: iBall Slide Q400X Plus
Android version: 7.0
File Size: 665MB
The Requirements
- A Windows PC
- Your smartphone
- A USB cable
- PhoenixSuit software tool
- Android USB driver
Flash the iBall Slide Q400X Plus Firmware Using PhoenixSuit Tool
Ensure that there is enough battery on your PC and your phone.
Download the firmware file that you wish to flash to your phone.
Extract the firmware file to get a .img file inside the firmware folder.
Download the PhoenixSuit tool to your PC and extract the files to a folder.
Locate the folder, find PhoenixSuit.exe, and open the file as an administrator to launch the tool.
When the tool opens, click on “Firmware” and then click on “Image” to locate the firmware you extracted earlier.
Select the file inside the .img firmware folder and load it on the PhoenixSuit to proceed.
Next is the power of your phone; while off, press and hold both the volume up and down keys and do not let go.
Now, connect your phone to the PC with the cable and keep clicking your power button for the tool to detect the phone.
When the tool detects your phone, it will prompt you to format the device; proceed with “Yes.”
When you click “Yes,” the installation will begin immediately.
Drop the phone and give it some minutes to finish flashing.
You will get a “Firmware Upgrade Successful” message when the flashing is complete.
Close the tool, unplug your phone, reboot it, and enjoy the new experience.
