Huawei Y7 2019 / Huawei Enjoy 9 (DUB Series) Official Firmware: Downloads, Fixes, and QFIL/EDL Flash Guide

Huawei Y7 2019 launched with Snapdragon 450, Android 8.1, and EMUI 8.2 across global variants DUB‑LX1/LX2/LX3, while the China variants DUB‑AL00/TL00 are branded as Huawei Enjoy 9 with the same core hardware and software base. Users often report battery drain over time and Wi‑Fi reliability issues, which stock reflashing can help resolve when the root cause is software corruption rather than hardware faults.

Qualcomm Emergency Download (EDL/9008) mode allows deep recovery on this device family using QFIL/QPST, which is what the “Board Software” and QPST/QFIL packages below are designed for.

Huawei Y7 2019 / Enjoy 9 Firmware Details

Warning: China models DUB‑AL00/DUB‑TL00 are marketed as Huawei Enjoy 9 and use C00 firmware, while global Y7 2019 models use region‑specific CUST codes like C432/C185/C605/C636, so cross‑flashing between China and global builds is not recommended and often fails.

Download Official Firmware for Huawei Y7 2019 / Enjoy 9

Select the package that matches your exact model (DUB‑LX1/LX2/LX3/AL00/TL00) and region/CUST, noting that “Board Software” and QFIL/QPST images are for deep recovery using EDL 9008 mode on Qualcomm devices.

📄 Filename: Huawei Y7 2019 DUB‑LX1 DUB‑LX2 DUB‑LX3 DUB‑AL00 Dubai‑AL00A‑BD 1.0.0.58 Board Software general 8.1.0 r1 EMUI8.2 05022NRB.rar

📦 Size: 1.1GB

🗓️ Build Date: —

🔢 Build Version: BD 1.0.0.58

🤖 Android Version: 8.1 / EMUI 8.2 baseline for this series

⬇️ Download Link: AndroidFileHost

Opinion: Board Software is intended for EDL recovery with QFIL/QPST and is useful for hard brick scenarios across listed DUB variants when properly matched to CUST.

📄 Filename: Huawei‑Y7‑2019‑DUB‑LX‑BD 1.0.0.61 – 8.0.0_r1_EMUI8.2 05022NRB.rar

📦 Size: 1.1GB

🗓️ Build Date: —

🔢 Build Version: BD 1.0.0.61

🤖 Android Version: Oreo/EMUI 8.2 baseline for this platform

⬇️ Download Link: Direct (Google Drive)

Opinion: Another board‑level EDL package suitable for deep recovery when rawprogram/patch files are included and variant/CUST align.

📄 Filename: DUB‑AL00C00B130D (8.2.0.130D) DUB‑TL00C00B130D (8.2.0.130D).zip

📦 Size: 1.75GB

🗓️ Build Date: —

🔢 Build Version: 8.2.0.130D (C00, China)

🤖 Android Version: 8.1 / EMUI 8.2 baseline

⬇️ Download Link: Google Drive

Opinion: For Huawei Enjoy 9 models (DUB‑AL00/DUB‑TL00) only and should not be cross‑flashed to global Y7 2019 variants due to C00 region differences.

📄 Filename: DUB‑AL00_DUB‑TL00_Dubai‑AL00A_8.2.0.127(C00)_all_cn_cmcc_cn_Firmware_general_8.1.0_r1_EMUI8.2_05015MMY.rar

📦 Size: 4.12GB

🔢 Build Version: 8.2.0.127 (C00, China)

🤖 Android Version: 8.1 / EMUI 8.2

⬇️ Download Link: Google Drive

Opinion: China‑specific firmware for Enjoy 9; confirm C00 and model alignment before flashing to avoid install failures.

📄 Filename: DUB‑LX1_DUB‑L21_Dubai‑L21_8.2.0.147(C432CUSTC432D1)_hw_eu_Firmware_8.1.0_r1_EMUI8.2_05015QGE.rar

📦 Size: 4.65GB

🔢 Build Version: 8.2.0.147 (C432 Europe)

🤖 Android Version: 8.1 / EMUI 8.2

⬇️ Download Link: Google Drive

Opinion: Intended for European units; do not use on C185/C605/C636 or China C00 devices.

📄 Filename: Huawei_Y7_2019_DUB‑LX1_8.2.0.176_C185.zip

📦 Size: 6.12GB

🔢 Build Version: 8.2.0.176 (C185 MEA)

🤖 Android Version: 8.1 / EMUI 8.2

⬇️ Download Link: AndroidFileHost

Opinion: For Middle East & Africa devices (C185) and should not be cross‑flashed to other regions.

📄 Filename: DUB‑LX1 8.2.0.176(C185CUSTC185D1)_Firmware_EMUI8.2_05016NWC.zip

📦 Size: 2.6GB

🔢 Build Version: 8.2.0.176 (C185)

🤖 Android Version: 8.1 / EMUI 8.2

⬇️ Download Link: AndroidFileHost

Opinion: Smaller payload variant of C185; confirm QFIL essentials (programmer/rawprogram/patch) if flashing in EDL.

📄 Filename: DUB‑LX2‑BD 1.0.0.61_Board Software_general_8.0.0_r1_EMUI8.2_05022NRB.rar

📦 Size: 1.11GB

🔢 Build Version: BD 1.0.0.61

🤖 Android Version: 8.1 / EMUI 8.2 baseline

⬇️ Download Link: Google Drive

Opinion: Board recovery for DUB‑LX2 only; use in 9008 with QFIL/QPST when the device is bricked.

📄 Filename: DUB‑LX2 8.2.0.130(C636CUSTC636D1)_Firmware_EMUI8.2_05016NYC.zip

📦 Size: 2.67GB

🔢 Build Version: 8.2.0.130 (C636 APAC)

🤖 Android Version: 8.1 / EMUI 8.2

⬇️ Download Link: Google Drive

Opinion: Use only on APAC C636 devices to avoid install errors and feature mismatches.

📄 Filename: DUB‑LX2 8.2.0.142(C636CUSTC636D1)_Firmware_EMUI8.2_05015STU.zip

📦 Size: 2.63GB

🔢 Build Version: 8.2.0.142 (C636)

🤖 Android Version: 8.1 / EMUI 8.2

⬇️ Download Link: Google Drive

Opinion: Preferred if newer than your current C636 build; always match the region code to the device.

📄 Filename: Huawei_Y7_Pro_DUB‑LX2_C636_QPST.zip

📦 Size: 3.56GB

🤖 Android Version: 8.1 / EMUI 8.2 baseline for Y7 Pro 2019

⬇️ Download Link: Google Drive

Opinion: QPST‑formatted for DUB‑LX2 Pro in APAC; ensure programmer, rawprogram, and patch are correctly loaded in QFIL/QPST.

📄 Filename: Huawei_Y7_2019_Prime_DUB‑LX3_8.2.0.138_C605_QPST.zip

📦 Size: 1.73GB

🔢 Build Version: 8.2.0.138 (C605 LATAM)

🤖 Android Version: 8.1 / EMUI 8.2 baseline for Y7 Prime 2019

⬇️ Download Link: Google Drive

Opinion: For LATAM DUB‑LX3 devices; region mismatches commonly fail or break features.

📄 Filename: Huawei_Y7_2019_Prime_DUB‑LX3_8.2.0.144_C605_XMl_Firmware_Dead_Boot_Auto_Recovery_Fix.zip

📦 Size: 3.2GB

🔢 Build Version: 8.2.0.144 (C605)

🤖 Android Version: 8.1 / EMUI 8.2 baseline

⬇️ Download Link: AndroidFileHost

Opinion: Labeled for dead boot auto‑recovery on LATAM DUB‑LX3; use in EDL when standard methods fail.

📄 Filename: Huawei_Y7_2019_Prime_DUB‑LX3_DUB‑L03_hw_la_calro_la_Dubai‑L03_8.2.0.130_C45_XMl_Firmware_Dead_Boot_Auto_Recovery_Fix.zip

📦 Size: 3.2GB

🔢 Build Version: 8.2.0.130 (C45 region code as labeled)

🤖 Android Version: 8.1 / EMUI 8.2 baseline

⬇️ Download Link: AndroidFileHost

Opinion: For DUB‑LX3/L03 units with the specified label; verify the exact region/operator code on your device before use.

📄 Filename: Huawei_Y7_DUB‑LX1_8.2.0_152_C185_140320_QFIL.zip

📦 Size: 4.2GB

🔢 Build Version: 8.2.0.152 (C185)

🤖 Android Version: 8.1 / EMUI 8.2

⬇️ Download Link: Google Drive

Opinion: QFIL‑ready C185 package for DUB‑LX1; ensure programmer/rawprogram/patch are present and loaded correctly in QFIL.

Flashing Requirements

• Windows PC, reliable USB cable, and Qualcomm HS‑USB QDLoader 9008 drivers installed for EDL mode.
• QPST/QFIL or QFlash Tool installed; verify firmware includes programmer.mbn, rawprogram.xml, and patch.xml where applicable.
• Battery charged to at least 50% and a full backup of user data, as EDL flashing can wipe partitions.
• Exact match of model (DUB‑LX1/LX2/LX3/AL00/TL00) and CUST/region (C432/C185/C605/C636/C00) before flashing.
• Ability to enter EDL 9008 via ADB, test point, or EDL cable if the device is bricked or fastboot‑locked.

How to Flash the Firmware

• Install QPST/QFIL and Qualcomm 9008 drivers, then open QFIL on the PC for EDL flashing.
• Select Flat Build, load the correct programmer (prog_firehose), then load rawprogram.xml and patch.xml from the firmware folder.
• Put the phone into EDL 9008 (ADB “reboot edl”, test point, or EDL cable) and confirm it shows as “Qualcomm HS‑USB QDLoader 9008” in Device Manager.
• Click Download in QFIL and wait for completion, avoiding any cable movement or power interruptions during flashing.
• Reboot the phone; if it hangs at the logo, boot to stock recovery, wipe data/cache, and reboot, then check for OTA updates.

Want full step‑by‑step guides with images and videos for Qualcomm flashing workflows and tools ?

• Qualcomm Devices (QFIL / EDL Mode)
• QPST: Qualcomm Product Support Tools
• QFlash Tool

Disclaimer: Flashing via EDL is for advanced users and carries risk; wrong builds, disconnections, or power loss can brick the device and erase data, and all actions are at your own risk, so comment with your exact model/CUST if you need guidance.