Hotwav Venus X14 Firmware Flash File Download [Stock Rom]

If you are a Hotwav Venus X14 user experiencing software-related problems, you have come to the right place. Many users of older devices like the Venus X14 often face issues such as slow performance, applications crashing, or the phone getting stuck on the startup logo. These problems are typically caused by corrupted system files or software glitches that accumulate over time. Re-installing the stock firmware is the most effective solution to restore your device to its original, factory-fresh state. This official firmware package for the Hotwav Venus X14 will help you resolve common software errors, remove viruses, and fix bootloop issues, ensuring your phone runs smoothly again.

Hotwav Venus X14 Firmware Details

Below is a detailed table containing all the necessary information about the firmware file and the Hotwav Venus X14 device. Please verify that your device model matches the details provided to ensure compatibility.

Important Warning: Before proceeding, ensure you have backed up all your personal data (photos, contacts, etc.). Flashing new firmware will completely erase the internal storage of your Hotwav Venus X14. Using the wrong file or interrupting the flashing process can permanently damage (“brick”) your device. Proceed with caution and at your own risk.

Download Official Firmware for Hotwav Venus X14

Here is the direct download link for the official stock ROM for your device. This package contains the original software released by the manufacturer.

📄 Filename: Hotwav_Venus_X14_2SIM_64_4_B1_A5_201608131343.zip
📦 Size: 705MB
🗓️ Build Date: 13-08-2016
🔢 Build Version: B1_A5_201608131343
🤖 Android Version: 5.1
⬇️ Download Link: MediaFire

How to Flash the Firmware

Flashing the firmware onto your Hotwav Venus X14 requires a computer, a USB cable, and the appropriate flashing tool. Here is a quick overview of the steps involved:

1. Download and extract the firmware file and the SPD Upgrade Tool on your computer.
2. Install the Spreadtrum (UNISOC) USB drivers on your PC.
3. Launch the SPD Upgrade Tool, and load the “.pac” file from the extracted firmware folder.
4. Turn off your phone, then press and hold the Volume Down button while connecting it to the computer.
5. The tool will detect your device and the flashing process will begin automatically.

For a complete, beginner-friendly guide with pictures and video instructions, please visit our detailed tutorial on how to flash Spreadtrum devices here: Complete Flashing Guide for Spreadtrum (UNISOC) Devices.