The Hotwav Venus X10 was one of the mid-range Android smartphones from Hotwav, known for its dual-SIM support, 3G connectivity, and decent build. However, users have reported issues such as “hang on logo,” “dead after flash,” touchscreen delays, battery drain, and app crashes. Installing the correct firmware compatible with your device’s chipset can fix these problems and restore system performance. The firmware files provided below are officially tested and verified for safe flashing.
Hotwav Venus X10 Firmware Details
| Device Name | Hotwav Venus X10 |
| Model Variants | D8058 (MT6580), MT6592 Version |
| Chipset | MediaTek MT6580 / MediaTek MT6592 |
| CPU | Quad-Core Cortex-A7 up to 1.3GHz |
| GPU | Mali-400 MP |
| Display | 5.5-inch 720×1280 IPS LCD |
| RAM | 1 GB |
| Storage | 8/16 GB Internal, Expandable |
| Rear Camera | 8 MP with LED Flash |
| Front Camera | 2 MP |
| Battery | 2800 mAh removable |
| Operating System | Android 5.1 / 6.0 |
| Flashing Tool | SP Flash Tool (MediaTek) |
| File Type | Scatter File / ZIP |
⚠️ Warning: Make sure to confirm the chipset version (MT6580 or MT6592) before flashing. Flashing the wrong firmware can permanently damage your phone or cause it to get stuck on the logo screen.
Download Official Firmware for Hotwav Venus X10
Below are two versions of the Hotwav Venus X10 firmware, depending on your chipset version:
1️⃣ Hotwav Venus X10 D8058 (MT6580, Android 5.1)
📄 Filename: Hotwav_Venus_X10_D8058_5.1_MT6580_P11.zip
📦 Size: 782 MB
🗓️ Build Date: Unknown
🔢 Build Version: P11
🤖 Android Version: 5.1 Lollipop
⬇️ Download Link: MediaFire
This ROM fixes “dead after flash,” “hang on logo,” and “apps not opening” issues. It is recommended for phones built on the older MT6580 platform.
2️⃣ Hotwav Venus X10 (MT6592, Android 6.0)
📄 Filename: Hotwav_Venus_X10_MT6592_010818_6.0.zip
📦 Size: 1.67 GB
🗓️ Build Date: August 1, 2018
🔢 Build Version: 010818_6.0
🤖 Android Version: 6.0 Marshmallow
⬇️ Download Link: Google Drive
This version upgrades the phone to Android Marshmallow, fixing network instability, Bluetooth pairing bugs, and camera crash problems common on older Lollipop firmware builds.
How to Flash the Firmware
Follow these quick steps to flash the Hotwav Venus X10 firmware using SP Flash Tool:
- Download and extract the chosen firmware ZIP file on your computer.
- Install the MTK USB VCOM drivers for your system.
- Open SP Flash Tool and load the scatter file from the extracted firmware folder.
- Power off your phone and connect it via USB.
- Click “Download” to start flashing and wait until the green confirmation tick appears.
For complete illustrated flashing instructions, click here.
