The Hotwav Magic 6 is a stylish budget Android smartphone built on the MediaTek MT6580 chipset. It offers an impressive display and battery life for its class, but many users have encountered software-related problems over time. Common complaints include bootloop, stuck logo, system lag, FRP lock, and sudden app crashes—usually caused by failed OTA updates or incomplete rooting attempts.
Installing the official Hotwav Magic 6 firmware helps you fix these problems and restore the device to its factory state. This firmware file is an original factory release version V01.01_B06_09102017, tested and verified for use with the SP Flash Tool.
Hotwav Magic 6 Firmware Details
| Device Name | Hotwav Magic 6 |
|---|---|
| Model | Magic 6 |
| Chipset | MediaTek MT6580 |
| Android Version | 7.0 (Nougat) |
| Firmware Version | V01.01_B06_09102017 |
| Build Date | October 9, 2017 |
| File Size | 1.30 GB |
| File Type | Scatter-based ZIP firmware |
| Flashing Tool | SP Flash Tool (MediaTek) |
⚠️ Important Warning: This firmware is exclusively for the Hotwav Magic 6 model with the MT6580 chipset. Flashing the wrong file may cause hardware issues such as touchscreen errors or loss of display. Always back up your data and IMEI (NVRAM) before flashing to avoid permanent data loss.
Download Hotwav Magic 6 Firmware
Below is the official and verified Hotwav Magic 6 firmware package. This ROM is suitable for repairing a bricked device, solving software instability, or performing a clean system reinstall.
📄 Filename: Hotwav_Magic_6_MT6580_V01.01_B06_09102017.zip
📦 Size: 1.30 GB
🗓️ Build Date: October 9, 2017
🔢 Version: V01.01_B06_09102017
🤖 Android Version: 7.0 (Nougat)
⬇️ Download Link: Download from Mediafire
How to Flash Hotwav Magic 6 Firmware (Using SP Flash Tool)
Follow these essential steps to flash your Hotwav Magic 6 firmware safely using the SP Flash Tool:
- Download and extract the Hotwav Magic 6 firmware package to your computer.
- Install MediaTek USB VCOM drivers to enable PC recognition of your device.
- Open SP Flash Tool and load the scatter file located in the firmware folder.
- Power off the phone and connect it to your PC via a USB cable.
- Click the “Download” button in SP Flash Tool to start flashing.
- Wait for the green checkmark to appear, then disconnect and reboot your device.
For a complete illustrated flashing guide with screenshots, troubleshooting tips, and safety steps, follow the link below:
Firmware Safety Notes & Disclaimer
This ROM has been tested and verified by Hotwav engineers. It includes all essential partitions such as system, boot, recovery, preloader, and userdata. When flashing, it is advisable to uncheck the “preloader” option in SP Flash Tool unless the device is completely dead.
Disclaimer: Firmware flashing involves risk. Ensure you understand each step before starting the process. We are not responsible for any damage or data loss resulting from incorrect flashing or interrupted operations. You can leave a comment below if you experience any issues during the flashing process.
