The Hotwav IP6 is a smartphone based on the Spreadtrum (Unisoc) SP7731G chipset, running on Android 6.0 (Marshmallow). Over time, budget devices like the IP6 often develop software-related issues, which can include:
- Being perpetually stuck at the “HOTWAV” logo (bootloop).
- Persistent application crashes or the “Unfortunately, app has stopped” error.
- General slow performance, system freezing, and unresponsiveness.
- Recovering a hard-bricked device that shows no signs of life after a failed update or rooting attempt.
This official stock firmware file is the most reliable way to perform a complete system reinstall, immediately resolving all these software-related problems by restoring the Hotwav IP6 to its original, factory-fresh operating condition.
Hotwav IP6 Firmware Details
This firmware is a scatter-based file designed for the Spreadtrum (Unisoc) SP7731G chipset and must be flashed using the designated tool for this platform.
| Detail | Specification |
|---|---|
| Device Name | Hotwav IP6 |
| Model | K19 (or similar) |
| Chipset | Spreadtrum (Unisoc) SP7731G |
| Android Version | 6.0 (Marshmallow) |
| Firmware Build | K19_170424_6.0 |
| File Type | MIRA Flash File (Spreadtrum) |
| Flashing Tool | Spreadtrum Upgrade Tool (or similar) |
⚠️ Critical Safety Precaution: Flashing this ROM will perform a full Factory Reset on your Hotwav IP6. This action will permanently erase all your personal data, including photos, contacts, and installed applications. You must ensure your phone is charged to at least 50% and use a reliable USB cable to prevent interruptions that could brick the device.
Download Official Firmware for Hotwav IP6 (SP7731G)
This is the official stock ROM package required for fixing boot issues and software problems on your Hotwav IP6.
- 📄 Filename:
Hotwav_IP6_SP7731G_K19_170424_6.0_MIRA.zip - 📦 Size: 897MB
- 🗓️ Build Date: 2017/04/24
- 🤖 Android Version: 6.0
- ⬇️ Download Link: Google Drive
How to Flash the Firmware (Spreadtrum/Unisoc)
As the Hotwav IP6 uses a Spreadtrum (Unisoc) SP7731G processor, the flashing process requires the official Spreadtrum Upgrade Tool (also known as SPD Upgrade Tool) or a compatible utility like Research Download Tool.
- Download and install the necessary Spreadtrum USB Drivers on your PC.
- Extract the downloaded firmware file and the Spreadtrum Upgrade Tool archive to a local folder.
- Launch the Upgrade Tool executable (e.g.,
UpgradeDownload.exe). - Click the Load Packet button (gear icon) and select the firmware file (typically with a
.pacextension) from the extracted folder. - After the file loads, click the Start Downloading button (play icon).
- Connect your Hotwav IP6 (must be completely powered OFF, you may need to hold a Volume key to enter download mode) to the PC via USB to begin the flashing process.
Disclaimer: Flashing firmware can carry risks, and you perform this procedure at your own risk. We provide these verified files and instructions for informational purposes only. We are not responsible for any data loss, hardware damage, or other negative consequences that may occur to your Hotwav IP6 during or after the flashing process. For technical assistance or to report issues, please provide detailed information in the comments.
