The Homtom S16 is an entry-level Android 7.0 Nougat smartphone built on the MediaTek MT6580 chipset, often used as a low-cost daily device with limited storage and basic performance. On this type of phone, failed OTA updates, aggressive app installs, or incomplete root attempts can easily trigger bootloops, random reboots, or devices stuck on the Homtom logo.
Installing the correct stock firmware can help recover the device from these software faults, restore the original system partitions, and stabilize performance after severe corruption, without addressing any physical hardware problems.
This page provides two preserved stock ROM builds for the Homtom S16 MT6580, both designed for use with scatter-based MediaTek flashing tools on Android 7.0. The packages are mirrored from legacy download pages and aimed at users who already have some familiarity with SP Flash Tool or similar utilities.
Homtom S16 Firmware Details
| Device Name | Homtom S16 |
| Model Identifier | S16 (Homtom_S16) |
| Codename | Homtom_S16_MT6580 |
| Chipset / Platform | MediaTek MT6580, quad‑core Cortex‑A7 with Mali GPU |
| Launch Android Version | Android 7.0 Nougat |
| Current Firmware Line | Stock Homtom Android 7.0 builds (non‑A/B, pre‑Treble) |
| Typical File Size Range | Around 900 MB – 1.3 GB for full stock ROM ZIP archives |
| Firmware Type | Scatter-based stock ROMs (SP Flash Tool‑compatible) |
| Flashing Tool | SP Flash Tool or compatible MediaTek flashing utility |
| Bootloader Requirement | Factory (locked) bootloader; flashing via preloader/download interface |
| Region / Branch Notes | Single global hardware line for the Homtom S16 MT6580 variant |
⚠️ Flashing Risks & Disclaimer
Flashing the Homtom S16 with an incorrect MT6580 scatter package, or interrupting SP Flash Tool during a write, can lead to a hard brick, loss of IMEI, or a device that no longer powers on properly. Because this phone uses tightly coupled preloader, modem, and display driver partitions tuned to its specific board, cross‑flashing ROMs from other MT6580 devices or different Homtom models can cause black screens, no network, or unstable touchscreen behavior that may require specialist tools to repair.
The stock ROMs listed here are provided strictly for recovery and maintenance of legitimately owned Homtom S16 devices and remain the intellectual property of their original rights holders. Each package is an unmodified original stock ROM mirrored for preservation, as the manufacturer no longer offers direct public downloads for these builds, and all trademarks and copyrights belong to their respective owners.
Download Official Firmware for Homtom S16
Each package below is an original stock ROM mirrored for preservation, as the manufacturer no longer provides public downloads for this model.
| Region / Variant | Filename | Build / Version | Android Version | File Type | Build / Upload Context | File Size | Download Link |
|---|---|---|---|---|---|---|---|
| Global (Homtom S16 MT6580) | Homtom_S16_MT6580_V1.0.8_20171208_7.0.zip | V1.0.8 – 2017‑12‑08 stock build line | Android 7.0 Nougat | ZIP archive (scatter-based stock ROM) | Legacy MediaFire download page | 989.41 MB | Download Homtom S16 V1.0.8 stock ROM (MediaFire mirror) |
| Global (Homtom S16 MT6580) | Homtom_S16_MT6580_180504_7.0.zip | 2018‑05‑04 stock build line | Android 7.0 Nougat | ZIP archive (scatter-based stock ROM) | Legacy MediaFire download page | 1.21 GB | Download Homtom S16 2018‑05‑04 stock ROM (MediaFire mirror) |
Flashing Requirements
- PC & OS: A Windows PC (Windows 7 or newer recommended) with administrator rights to install MediaTek USB/VCOM drivers.
- Flashing Tool: SP Flash Tool configured to use the MT6580 scatter file from the chosen Homtom S16 firmware package.
- Drivers: Correct MediaTek preloader/VCOM or CDC drivers so the powered‑off device is detected when connected in download mode.
- Bootloader & Modes: Stock locked bootloader is usually sufficient; flashing is carried out over the preloader interface with the phone powered off.
- Data & Wipe Behavior: Operations such as “Firmware Upgrade” or “Format All + Download” can erase user data and NVRAM; back up internal storage and, when possible, NVRAM/IMEI before flashing.
- Device Verification: Confirm that the phone is the Homtom S16 MT6580 (check About Phone and physical labels) and avoid using these ROMs on other MT6580 devices or different Homtom models.
- Power & Cable: Charge the device to at least 50% and use a reliable USB cable and stable USB port to minimize disconnections during flashing.
How to Flash the Firmware
- Download and extract the desired build: Choose either Homtom_S16_MT6580_V1.0.8_20171208_7.0.zip or Homtom_S16_MT6580_180504_7.0.zip for the Homtom S16, then extract the archive on the PC to expose the MT6580 scatter file and partition images.
- Install drivers and open SP Flash Tool: Install MediaTek USB/VCOM drivers, launch SP Flash Tool, and load the MT6580 scatter file from the extracted folder so all partitions for this model are listed.
- Select flashing mode and partitions: Use “Download Only” for a limited repair or “Firmware Upgrade” for a clean reinstall, taking care not to format NVRAM or preloader unless there is a specific unbrick reason.
- Connect the powered‑off S16: With the phone fully powered off, click “Download” in SP Flash Tool, then connect the Homtom S16 via USB so the preloader port is detected and the flashing process starts automatically.
- Allow time for first boot: After SP Flash Tool shows a success message, disconnect the cable and power on the device; the first boot into Android 7.0 may take several minutes while the system optimizes apps and rebuilds caches.
For a more detailed reference on using SP Flash Tool with MediaTek scatter firmware, see: How to flash MediaTek firmware with SP Flash Tool.
Frequently Asked Questions (FAQs)
Which Homtom S16 firmware build should be used first?
Both packages target the same MT6580 Homtom S16, but the 2018‑05‑04 build is generally newer than the 2017‑12‑08 V1.0.8 ROM, so users often start with the newer archive unless troubleshooting a specific legacy issue.
Can these ROMs fix a Homtom S16 stuck on the boot logo?
Yes, a properly flashed stock ROM can often recover a device stuck on the Homtom logo due to software corruption, failed OTA updates, or unsuccessful rooting, provided there is no underlying hardware damage.
Do I need to unlock the bootloader to flash these MT6580 packages?
For the Homtom S16, SP Flash Tool usually works through the preloader interface with the bootloader in its factory state, so bootloader unlocking is not typically required for restoring stock firmware.
Is it safe to move between V1.0.8 (2017‑12‑08) and the 2018‑05‑04 build?
Cross‑flashing between these two official Homtom S16 MT6580 stock packages is usually possible as long as the scatter file and partitions match this exact model, but a clean flash that wipes data is often recommended when changing builds.
Why are the firmware files hosted on MediaFire instead of an official Homtom server?
The original vendor download endpoints for the Homtom S16 are no longer publicly available, so these builds are preserved as archival mirrors on MediaFire for users who still rely on the device.
Will flashing these ROMs upgrade Android beyond version 7.0 on the S16?
No. Both packages contain stock Android 7.0 Nougat for the Homtom S16 and do not provide an official upgrade path to newer major Android releases.
