The Homtom HT27 is a budget Android smartphone based on the MediaTek MT6580 platform, shipping with Android 6.0 Marshmallow and typical entry-level hardware for its generation. The firmware package linked here is a full stock ROM intended for restoring the phone from bootloops, system corruption, or failed modifications by rewriting all key software partitions using a compatible flashing tool.
Installing the correct build for this model can help return the device to a clean factory state, as long as the hardware itself is still functional.
Homtom HT27 Firmware Details
| Device Name | Homtom HT27 |
|---|---|
| Model Identifier | Homtom HT27 (single-SIM / dual-SIM variants, MT6580 board) |
| Codename | HT27_MT6580 |
| Chipset / Platform | MediaTek MT6580 (32‑bit Cortex‑A7, Mali‑400 GPU) |
| Launch Android Version | Android 6.0 Marshmallow |
| Current Firmware Line | Homtom stock ROM V6.1.3 branch |
| Typical File Size Range | Roughly 700–900 MB for compressed SP Flash Tool packages |
| Firmware Type | Scatter-based stock ROM for SP Flash Tool (MT6580) |
| Flashing Tool | SP Flash Tool (MediaTek scatter firmware) |
| Bootloader Requirement | Flashes via preloader/bootrom with standard MTK DA; no user bootloader unlock menu required, but secure boot or DA auth may apply on some revisions. |
| Region / Branch Notes | Generic MT6580 Homtom HT27 stock build; primarily intended for the same board revision and memory configuration. Avoid flashing to other Homtom or MT6580 models. |
⚠️ Flashing Risks & Disclaimer
Flashing the Homtom HT27 involves rewriting low-level partitions such as preloader, boot, system, and userdata via the MT6580 bootrom using SP Flash Tool. Using an incorrect scatter package or DA configuration can render the phone completely unresponsive (no boot, no charging indication), which may require advanced test‑point procedures or professional tools to recover.
On older MT6580 boards, flashing an incompatible preloader from another device or variant is a common cause of permanent bricks, so it is generally safer to leave the preloader unticked unless specifically needed for recovery.
This firmware is provided as an original stock ROM package for maintenance and repair purposes only. All trademarks, device names, and firmware contents remain the property of their respective owners. No modifications are applied to the files, and responsibility for any data loss, malfunction, or damage rests solely with the end user.
Download Official Firmware for Homtom HT27
The table below lists the available stock ROM package for this model. Verify that the device is actually a Homtom HT27 based on the MT6580 platform before downloading or flashing.
| Region / Variant | Filename | Build / Version | Android / Firmware Version | File Type | Build Date | File Size | Download Link |
|---|---|---|---|---|---|---|---|
| Global (MT6580 board) | Homtom_HT27_MT6580_V6.1.3_20170508_6.0.zip | V6.1.3 (2017‑05‑08) | Android 6.0 Marshmallow | SP Flash Tool scatter ROM (compressed ZIP) | 2017‑05‑08 | 780 MB | Download Homtom HT27 stock ROM (Google Drive mirror) |
This package is an original stock ROM mirrored for preservation, as the manufacturer no longer provides public downloads for this model.
Flashing Requirements
Homtom HT27 firmware flashing relies on the MediaTek MT6580 platform and SP Flash Tool, so prepare the PC and device accordingly before starting.
- PC and OS: A Windows PC (Windows 7 or newer, 64‑bit recommended) with administrator rights, a stable USB port, and an intact USB cable suitable for data transfer.
- Drivers and tools: Install MediaTek VCOM / USB drivers and download a recent, compatible build of SP Flash Tool, then extract both the tool and the Homtom_HT27_MT6580_V6.1.3_20170508_6.0.zip firmware archive to easily accessible folders.
- Bootloader and modes: This MT6580 device is typically flashed via preloader/bootrom when powered off; no on‑device OEM unlock menu is required, but some PC environments may need driver signature enforcement disabled to load VCOM drivers correctly.
- Backup and data loss: A full firmware flash with “Download Only” or “Firmware Upgrade” in SP Flash Tool will usually wipe user data and may format internal storage; back up any accessible files, contacts, and accounts before proceeding.
- Device verification: Confirm the phone label, board name in recovery/engineering menus (HT27 / MT6580), and storage configuration match this package; never use this ROM on other Homtom or generic MT6580 devices.
How to Flash the Firmware
The Homtom HT27 uses a standard MediaTek MT6580 flashing flow with SP Flash Tool and a scatter file. The outline below covers the high‑level steps for installing the V6.1.3 2017‑05‑08 build.
- Download and extract the ROM: Get the Homtom_HT27_MT6580_V6.1.3_20170508_6.0.zip package from the link above and extract it on the PC; ensure the scatter file (usually MT6580_Android_scatter.txt) and partition images are visible in the folder.
- Set up SP Flash Tool and drivers: Install MTK VCOM drivers, launch SP Flash Tool, and in the “Download” tab, load the MT6580 scatter file from the extracted Homtom HT27 firmware directory so that the partition list is populated.
- Choose flashing mode and partitions: Select “Download Only” for a typical repair, leaving “Format All” only for special cases, and decide whether to include or exclude preloader based on the device’s condition and risk tolerance.
- Connect the powered‑off phone: With the HT27 completely powered off (and battery inserted if removable), click “Download” in SP Flash Tool, then connect the phone via USB; the MT6580 VCOM port should appear and the flashing process should begin automatically.
- Wait for completion and first boot: After SP Flash Tool reports a successful download, disconnect the phone, power it on, and allow extra time for the first boot as Android 6.0 rebuilds caches and optimizes apps on the fresh V6.1.3 system.
For a more detailed walkthrough of SP Flash Tool usage with MediaTek scatter firmware, refer to this guide: Flash MediaTek firmware with SP Flash Tool.
Frequently Asked Questions (FAQs)
Is this Homtom HT27 firmware safe for all MT6580 devices?
No. This package is specifically built for the Homtom HT27 MT6580 board. Flashing it on other Homtom or generic MT6580 phones can cause serious bricks or loss of baseband.
Do I need an unlocked bootloader to flash this ROM?
SP Flash Tool communicates with the MT6580 bootrom/preloader layer, so standard flashing on the HT27 does not require an OEM unlock toggle in Android, but security policies or driver issues can still block access on some PCs.
Will this firmware remove root or custom recovery?
Yes, a full flash with all relevant partitions selected will overwrite a custom recovery, patched boot images, and other root‑related modifications, returning the device to stock software.
Why does SP Flash Tool not detect my Homtom HT27?
Connection problems are often due to missing or incorrectly installed MTK VCOM drivers, poor USB cables, or not connecting the powered‑off phone at the correct time; reinstalling drivers and using a direct USB port usually helps.
Can I skip flashing the preloader on this device?
Skipping the preloader is often safer when the phone still powers on, since flashing an incompatible preloader is a common cause of dead MT6580 devices; only include it if the existing preloader is clearly corrupted and this package is confirmed correct.
Will flashing this ROM update my Android version?
No. This stock ROM keeps the device on Android 6.0 Marshmallow; it is intended for stability and recovery rather than upgrading the Homtom HT27 to a newer Android major version.
Why is the first boot after flashing so slow?
After installing the V6.1.3 firmware, the first boot can take several minutes while Android initializes system data and optimizes applications, especially on the limited MT6580 hardware and storage speeds.
Can I use OTA updates after flashing this package?
If the flashed system matches the original region and build branch, OTA may continue to work, but given the age of the Homtom HT27, official OTA distribution is unlikely and many devices will remain on this final stock version.
