Hello P80 Firmware Flash File Download [Stock Rom]

The Hello P80 is an ultra-budget smartphone or tablet released in 2019, designed for the most essential mobile tasks. It is powered by the entry-level MediaTek MT6580 quad-core processor and runs on Android 6.0 Marshmallow. With its very limited hardware, likely including just 1GB of RAM and a small amount of internal storage, the device is extremely prone to severe performance degradation, storage errors, and general instability as it ages. For owners of this device, performing a clean firmware flash is the only effective method to restore it to a usable factory state.

This guide provides the official stock ROM package for the Hello P80, allowing you to perform a complete software reinstallation.

Hello P80 Firmware Details

Below are the key specifications for the Hello P80. This firmware will restore the device to its original Android 6.0 Marshmallow software.

Why Flash the Stock Firmware on Your Hello P80?

Due to its extremely limited hardware, flashing the stock firmware is essential for addressing the critical performance issues that make this device nearly unusable over time:

• Fix Extreme Performance Lag: This is the primary reason to flash. A clean OS install is the only effective way to handle the severe system-wide lag that makes even basic navigation a frustrating experience.
• Resolve “Insufficient Storage” Errors: Wipes the device clean, freeing up the very limited internal storage to allow essential system functions and a small number of apps to run.
• Stop Constant App Crashes: Solves persistent “force close” errors caused by the device running out of its limited RAM when attempting to run modern applications.
• Remove Viruses and Malware: Older, unpatched devices are highly vulnerable to malware. A full firmware flash is the only way to guarantee its complete removal.
• Fix Bootloop Errors: The only reliable method to fix a phone that is stuck on the Hello startup logo and will not boot.
• Unbrick Your Device: Revives a phone that has become completely unresponsive due to a software error.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This process will completely erase all data from the phone’s internal storage.

• The latest version of the SP Flash Tool.
• The correct MediaTek VCOM USB drivers installed on your PC.

Download Official Firmware for Hello P80

• Build Date: 210619
  • File Name: Hello_P80_MT6580_210619_6.0.zip
  • Size: 1 GB
  • 🔗 Download Link: Download (Google Drive)

How to Flash the Firmware

This firmware must be installed using the SP Flash Tool. The process involves loading a scatter file from the downloaded firmware. Here is a summary of the steps:

1. Download and extract the Hello_P80_MT6580_210619_6.0.zip file to a new folder on your computer.
2. Ensure the MediaTek VCOM USB drivers are properly installed on your PC.
3. Launch the SP Flash Tool software.
4. Click the “Scatter-loading” button and select the MT6580_Android_scatter.txt file from the extracted firmware folder.
5. Completely power off your Hello P80.
6. In SP Flash Tool, confirm the mode is set to “Download Only,” then click the green “Download” button.
7. Connect your powered-off phone to the computer via USB cable to begin the flashing process.

For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: Flashing firmware is an advanced procedure that carries inherent risks. If instructions are not followed precisely, you could permanently damage your device. We are not responsible for any data loss or hardware issues. Proceed with caution.