Goodone Jiyo 4G Firmware Flash File Download [Stock Rom]

The Goodone Jiyo 4G was a budget smartphone from 2017 that aimed to deliver a premium experience with a large 4000mAh battery and a sharp 5.5-inch 1080p Full HD display. It was powered by a MediaTek MT6737T quad-core processor, with 2GB of RAM and 16GB of storage, running on Android 6.0 Marshmallow. However, the combination of an entry-level processor and a high-resolution screen often leads to significant performance issues and can cause abnormal battery drain, undermining the phone’s main selling point. For owners experiencing these problems, reinstalling the official stock firmware is the best way to restore the device to its original, optimized state.

This guide provides the official stock ROM package for the Goodone Jiyo 4G, allowing you to perform a clean software installation.

Goodone Jiyo 4G Firmware Details

Below are the key specifications for the Goodone Jiyo 4G. This firmware will restore the device to its original Android 6.0 Marshmallow software.

Why Flash the Stock Firmware on Your Goodone Jiyo 4G?

Flashing the official stock ROM can resolve many of the specific performance issues caused by the device’s hardware combination:

• Fix Severe Performance Lag: This is the most important reason to flash. A clean install can significantly reduce the stuttering and lag caused by the MT6737T processor struggling to power the 1080p display.
• Resolve Abnormal Battery Drain: A fresh OS can fix software bugs that cause the large 4000mAh battery to drain faster than expected, restoring the phone’s primary feature.
• Improve System Stability: A clean flash will remove accumulated junk files and can resolve conflicts that lead to frequent app crashes and system freezes.
• Remove Viruses and Malware: If your device has been infected with persistent malware, a full firmware flash is the only way to guarantee its complete removal.
• Fix Bootloop Errors: The definitive solution for a phone that is stuck on the startup logo and will not boot into the operating system.
• Unbrick Your Device: Can revive a phone that has become completely unresponsive due to a software error.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This process will completely erase all data from the phone’s internal storage.

• The latest version of the SP Flash Tool.
• The correct MediaTek VCOM USB drivers installed on your PC.

Download Official Firmware for Goodone Jiyo 4G

• Build Date: 13012017
  • File Name: Goodone_Jiyo_4G_MT6737T_13012017.zip
  • Size: 849 MB
  • 🔗 Download Link: Download (MediaFire)

How to Flash the Firmware

This firmware must be installed using the SP Flash Tool. The process involves loading a scatter file from the downloaded firmware. Here is a summary of the steps:

1. Download and extract the Goodone_Jiyo_4G_MT6737T_13012017.zip file to a new folder on your computer.
2. Ensure the MediaTek VCOM USB drivers are properly installed on your PC.
3. Launch the SP Flash Tool software.
4. Click the “Scatter-loading” button and select the MT6737T_Android_scatter.txt file from the extracted firmware folder.
5. Completely power off your Goodone Jiyo 4G.
6. In SP Flash Tool, confirm the mode is set to “Download Only,” then click the green “Download” button.
7. Connect your powered-off phone to the computer via USB cable to begin the flashing process.

For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: Flashing firmware is an advanced procedure that carries inherent risks. If instructions are not followed precisely, you could permanently damage your device. We are not responsible for any data loss or hardware issues. Proceed with caution.