Official Firmware v180823 – Download & Full Step-by-Step Guide
⇩ Download: Elephone_Soldier_MT6797_180823_8.0.zip (1.25GB)
Direct official stock ROM | For MT6797 Helio X25 chipset | Last updated: 180823
What’s Included in This Build?
- Stable Android 8.0 Oreo interface and security updates
- Improved battery optimization and app compatibility
- OTA update stability and less network drop (per user forums)
- Enhanced NFC and GPS for supported regions
Flashing Instructions & Pro Tips
- Fully backup your data and ensure your device model (MT6797 Soldier).
- Extract the ZIP file; install MediaTek VCOM/Preloader drivers on your PC.
- Open SP Flash Tool, select the scatter file from the ROM folder.
- Power off the device, hold Volume Down, and connect via USB.
- Click Download and wait for a green checkmark.
Pro tip:
Flashing just system and boot can update with less data loss. Use “Download only” mode for upgrades; “Format All + Download” for a fresh start.
Flashing just system and boot can update with less data loss. Use “Download only” mode for upgrades; “Format All + Download” for a fresh start.
Troubleshooting & Common Issues
- Bootloops: Re-flash after a full factory reset via recovery or SP Flash Tool.
- Battery calibration: Let the device fully discharge/charge after update, or recalibrate via factory/TWRP menu if the percentage seems incorrect.
- OTA won’t work: Manual flash may disable updates. Check XDA, 4PDA, or Elephone forums for latest versions.
What Community Users Say
“Stable Oreo daily driver—GPS location fix and NFC actually works! Only glitch: don’t mix region ROMs or it may ‘hard brick’ your phone. Always check model and backup!”
— Power user, major Russian forum thread
Expert’s Flash Checklist
- Backup IMEI/NVRAM with SP Flash Tool or TWRP before starting
- Charge your battery over 60%
- Check ROM file hash (MD5/SHA1) for corruption
- DO NOT disconnect the cable during the flashing process
- Allow 10–15 minutes for first boot; device will optimize apps
FAQ
- Can I use this to recover from a bootloop?
- Yes; flashing the full package restores most errors except for hardware faults.
- Will this erase my device?
- Flashing all partitions will wipe data. To retain data, advanced users should flash only needed partitions.
- Is TWRP custom recovery still possible afterwards?
- Yes, but you’ll need to re-flash TWRP after updating, as stock recovery is rewritten.
