This official stock firmware for the Elephone Soldier (chipset: MediaTek MT6797/Helio X25) delivers a stable Android 8.0 Oreo experience, including interface optimizations and essential fixes reported in user forums. The 180823 build is one of the latest available, providing greater app compatibility, improved OTA reliability, and better battery optimization over earlier versions.
Firmware Download:
Elephone_Soldier_MT6797_180823_8.0.zip — 1.25GB
Flashing Guide — Read Before You Upgrade
Device Compatibility:
This ROM is specifically designed for the Elephone Soldier with MT6797 chipset—flashing it on other devices, even those with similar hardware, may cause issues.
Preparation:
-
Backup your entire phone using a PC utility or TWRP: system upgrades will wipe all data.
-
Install the latest MediaTek VCOM/Preloader drivers on your PC.
-
Ensure your battery is at least 60% charged prior to starting.
Flashing Steps:
-
Extract the .zip file using 7-Zip or WinRAR.
-
Launch the latest official SP Flash Tool.
-
Load the “scatter” file from the extracted ROM folder.
-
Power off the phone, hold Volume Down, and connect via USB.
-
Click “Download” in SP Flash Tool and wait until you see a green “OK” check mark.
Tip: Advanced users on XDA and 4PDA recommend flashing only “system” and “boot” partitions for upgrades, retaining user data when possible. For a clean slate, flash all partitions.
Troubleshooting & Community Insights
-
Bootloops or Stuck on Logo:
This is a common issue after misaligned versions or improper wipes. Reddit and forum experts suggest re-flashing after a full factory reset via recovery or SP Flash Tool. -
Battery Calibration Issues:
Some MT67xx-based devices, including Soldier, face battery percentage errors after flashing. Solutions from tech communities include complete battery drain and recharge cycles, using factory mode or TWRP to recalibrate, and, if needed, re-flashing with a “battery fix” ROM variant. -
OTA Updates Stop Working:
Manual firmware flashing sometimes disables the device’s built-in update mechanism. Manually check for new releases on XDA, 4PDA, or Elephone’s site.
Global User Experience
-
Owners in European and Russian communities on 4PDA confirm better NFC and GPS stability compared to earlier builds.
-
U.S./India users, especially on Android-focused Reddit and XDA, recommend this ROM for fixing app crashes and random network drops seen in shipped firmware.
-
In non-English forums, guides highlight the importance of using exact model firmware and not mixing regional builds, as this can “hard brick” the device.
“Expert’s Flash Checklist”
-
Download only official, signed scatter-based firmware.
-
Backup IMEI/NVRAM partitions before flashing—these are essential for network function.
-
Use verified USB cables and avoid disconnecting until flashing is done.
-
After flashing, leave the first boot for 10–15 minutes; Oreo can optimize apps for a long time on initial start.
FAQ
Q: Can this update be used to unroot or recover from a bootloop?
A: Yes, full stock firmware restores system and can fix root- or custom ROM-related issues if the device is not physically damaged.
Q: Will I lose data?
A: Flashing all partitions wipes the device; advanced users may opt for limited partition flashing to retain data.
Q: Is TWRP supported after flashing?
A: Re-install TWRP if needed, as stock recovery is restored by default; this device supports most generic MT67xx TWRP builds.
Community Resources for Elephone Soldier
-
XDA and 4PDA threads for custom recovery, root, and troubleshooting.
-
Telegram user groups for live help and latest firmware links.
-
YouTube channels with full SP Flash Tool tutorials for Elephone devices.
