The Elephone S2 was a compact and stylish budget smartphone from 2015, notable for its premium design which featured a metal frame and a glass back with an eye-catching diamond texture pattern. It came with a 5.0-inch HD display, a 64-bit MediaTek MT6735P quad-core processor, 2GB of RAM, and ran on Android 5.1 Lollipop. While praised for its design and snappy UI, early software builds had several documented bugs affecting its hardware, including the compass and wireless radios. For users experiencing these frustrating issues, flashing the latest official stock firmware is the best way to resolve them.
This guide provides both the original and the updated stock ROM packages for the Elephone S2, allowing you to restore or update your device.
Elephone S2 Firmware Details
Below are the key specifications for the Elephone S2. The latest known official firmware for this device is the bug-fix release from June 2015, which is the recommended version for all users.
| Attribute | Details |
|---|---|
| 📱 Device | Elephone S2 |
| 🆔 Chipset | MediaTek MT6735P |
| 🤖 Android OS | 5.1 Lollipop |
| ✅ Latest Version | 20150617 |
| 🗓️ Release Date | June 17, 2015 |
| 📂 File Type | Scatter Firmware |
| 💻 Flashing Tool | SP Flash Tool |
Why Flash the Stock Firmware on Your Elephone S2?
Flashing the latest official stock ROM is the most effective way to resolve specific, well-documented software bugs that affected the Elephone S2:
- Fix Faulty Compass: Solves a bizarre and widely reported bug where the compass would only function correctly when the phone was held at a 45-degree angle.
- Improve Weak Wi-Fi Performance: Addresses an issue where the device had a sub-par Wi-Fi range and unstable connection.
- Enhance GPS Accuracy: Can improve GPS performance, which was known to have a low satellite lock count and poor signal-to-noise ratio (SNR).
- Reduce UI Stutter: A clean install can smooth out the minor stutters and transition lags that were present in the phone’s UI.
- Fix Bootloop Errors: The definitive solution for a phone that is stuck on the Elephone logo and will not boot into the operating system.
- Unbrick Your Device: Can revive a phone that has become completely unresponsive due to a software error.
⚠️ Important Prerequisites
Before you begin, it is crucial to back up your personal data. This flashing process will completely erase the phone’s internal storage.
- The latest version of the SP Flash Tool.
- The correct MediaTek VCOM USB drivers installed on your PC.
Download Official Firmware for Elephone S2
- Build Date: 20150617 (Latest Recommended)
- File Name: Elephone_S2_20150617_5.1.zip
- Size: 528 MB
- 🔗 Download Link: Download Here
- Build Date: 20150603 (Older Version)
- File Name: Elephone_S2_20150603_5.1.zip
- Size: 539 MB
- 🔗 Download Link: Download Here
How to Flash the Firmware
This firmware must be installed using the SP Flash Tool. The process involves loading a scatter file from the downloaded firmware package. Here is a summary of the steps:
- Download your chosen firmware and extract the .zip file to a new folder. For the update, extract
Elephone_S2_20150617_5.1.zip. - Ensure the correct MediaTek VCOM USB drivers are installed on your PC.
- Launch the SP Flash Tool software.
- Click the “Scatter-loading” button and select the
MT6735_Android_scatter.txtfile from the extracted firmware folder. - Completely power off your Elephone S2.
- In SP Flash Tool, confirm the mode is set to “Download Only,” and then click the green “Download” button.
- Connect your powered-off phone to the computer via USB cable to begin the flashing process.
For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:
→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones
Disclaimer: Flashing firmware is an advanced procedure that carries inherent risks. If instructions are not followed precisely, you could permanently damage your device. We are not responsible for any data loss or hardware issues. Proceed with caution.
