Download Benco S1 Pro (AE9260) Stock Firmware (Flash File | SPD Tool)

The Benco S1 Pro (AE9260) is a budget smartphone that runs on the Unisoc T616 chipset and Android 13, offering a large 6.8-inch display and a 64MP primary camera. While it provides a near-stock Android experience, some user reviews from tech sites like GadgetByte Nepal have pointed out inconsistent camera performance and occasional software bugs. Users have noted that while the camera can produce vibrant photos, the results are not always consistent, and general performance can sometimes lag. Flashing the official stock firmware is the best way to resolve these software-level issues by performing a clean installation of a stable, factory-optimized version of the operating system.

Benco S1 Pro (AE9260) Firmware Details

Download Official Firmware for Benco S1 Pro (AE9260)

Why Flash This Specific Firmware?

• Improve Camera Performance: This firmware reinstalls the original camera drivers and image processing libraries. This can fix inconsistent image quality, color reproduction issues, and “camera failed” errors reported by some users.
• Fix Bootloop or “Hang on Logo”: If your Benco S1 Pro is stuck on the Benco logo and will not boot into the system, flashing this official .pac file is the standard and most effective solution to unbrick the device.
• Resolve Software Bugs and Lags: A clean firmware installation eliminates random app crashes, UI stuttering, and other performance issues that can develop over time due to data corruption.
• Remove Screen Lock and FRP: This firmware can be used to bypass forgotten screen locks (Pattern, PIN, Password) and remove the Google Factory Reset Protection (FRP) lock after a hard reset.

Some of the Bug / Firmware Fixes

• Firmware (Aug 21, 2023): This is a stable factory build containing optimized system libraries to improve overall device stability and address software glitches present in earlier versions.
• Includes updated camera tuning parameters to provide more consistent and reliable photo quality across different lighting conditions.
• Restores the original modem and baseband files, which is crucial for fixing any potential network connectivity issues, such as intermittent signal drops or VoLTE problems.
• Corrects memory management protocols in Android 13 for the Unisoc T616 chipset, reducing the likelihood of background apps being prematurely closed.

Crucial Prerequisites Before Flashing

• Backup All Data: The flashing process will completely wipe your phone’s internal memory.
• Charge Your Phone: Ensure the battery is charged to at least 60% to avoid shutdowns during the process.
• Install Spreadtrum/Unisoc Drivers: You must install the Unisoc SCI USB drivers on your Windows PC.
• Download the Flashing Tool: You will need the SPD Upgrade Tool.
• Use a Quality USB Cable: For a stable and successful flash, use a reliable USB-C cable.

How to Flash the Firmware

Flashing the .pac firmware onto your Benco S1 Pro requires the SPD Upgrade Tool. Follow these steps:

1. Download and extract the firmware Benco_S1_Pro_..._SPD.zip file on your computer.
2. Launch the SPD Upgrade Tool application.
3. Click the single gear icon (“Load Packet”) and navigate to the extracted firmware folder to select the .pac file.
4. After the file loads successfully, click the play icon (“Start Downloading”).
5. Power off your Benco S1 Pro completely.
6. Press and hold both the Volume Up and Volume Down buttons simultaneously, then connect the phone to your computer via USB-C cable while still holding the buttons.
7. The tool will detect the device, and flashing will begin. You can release the volume buttons now.
8. Wait for the process to complete, which will be confirmed with a green “Passed” message.
9. Disconnect the phone and power it on. The first boot can take 5 to 10 minutes.

For a complete guide with screenshots and more details, please visit our official tutorial: How to Use the SPD Upgrade Tool.