Digma Plane 7552M 3G (PS7165MG) Official Firmware Download & Flash Guide

Published:

If your Digma Plane 7552M 3G (PS7165MG) is facing bootloop, constant lag, malware pop-ups, or battery/charging problems, flashing the correct stock firmware is the solution. This guide features the PS7165MG ROM, fast flashing instructions, and targeted troubleshooting sourced from global user and Russian 4PDA communities.

🚨 Critical Pre-Flash Warning

Flashing will erase all your data on the Digma Plane 7552M 3G. Back up photos, documents, and contacts. Only use firmware for PS7165MG — wrong files can damage your tablet or cause IMEI loss.

Device Specifications Verification

Verify these details match before flashing:

Specification Details
Device Name Digma Plane 7552M 3G (PS7165MG)
Release Year 2017
Chipset MediaTek MT6580 (Quad-core 1.3GHz)
GPU ARM Mali-400 MP2
Display 7.0″ IPS, 1024 × 600 px
RAM/Storage 1 GB / 16 GB (microSD up to 64GB)
Battery 2200 mAh
Android Version Android 7.0
SIM Dual SIM (Mini-SIM, Micro-SIM) Standby
Other Features 3G, FM, GPS, WiFi
See also
Digma Vox Flash 4G VS5015ML Firmware Flash File Download [Stock Rom]

Official Firmware Downloads

Digma Plane 7552M 3G PS7165MG Official ROM
Filename Date Build Android Size Download
Digma_Plane_7552M_PS7165MG_MT6580_171104_SPMDT.zip Nov 2017 171104 (SPMDT) 7.0 ~1GB Download (Google Drive)

⭐ Recommendation: This firmware corrects system UI errors, restores touch and charging function, and is the most stable version for PS7165MG hardware as confirmed by repair forums.

Required Tools & Drivers

  1. SP Flash Tool (latest version)
  2. MediaTek VCOM USB Drivers
  3. Digma Plane 7552M 3G firmware file (see above)

Driver Installation Notes:

  • Disable driver signature enforcement under Windows for VCOM drivers if device is not detected after install.
  • Connect tablet only after installing all USB drivers.

Quick Flashing Instructions (Summary)

  1. Install MediaTek VCOM drivers on your PC.
  2. Extract the downloaded firmware and SP Flash Tool.
  3. Run SP Flash Tool and load the MT6580_Android_scatter.txt file found in the firmware folder.
  4. Set Flash Tool to Download Only and click Download.
  5. With tablet off, connect to PC by USB. Flashing begins—wait for green OK.

For step-by-step SP Flash Tool fixes and troubleshooting, use the full guide:
How to Flash Firmware on MediaTek Devices.

See also
Download Digma Citi 10 E402 Firmware (Stock ROM & Flash File)

Troubleshooting & Optimization

1. Malware/Popup Ad Removal

  • Symptoms: New apps self-install, ad pop-ups after reboot, system slowdowns.
Solution:
  1. Flash official PS7165MG ROM (removes persistent adware in system partition).
  2. After flashing, block unknown sources and avoid restoring old infected backups.
  3. Update Play Store and all Google apps as soon as first boot finishes.

2. Charging & Battery Reading Issues

  • Symptoms: Tablet charges very slowly, battery level stuck or inaccurate.
Solution:
  1. Official ROM optimizes battery profile—many users needed 2-3 charge/discharge cycles post-flash for calibration.
  2. Use only 1A+ wall charger; avoid USB PC ports for first charge.
  3. If false readings persist, battery cell is likely degraded (common after 2+ years).

3. Touchscreen Stops Responding

  • Symptoms: Random dead zones, entire touch or buttons stop working after OTA or root attempt.
Solution:
  1. Flash stock ROM, then enter recovery (Power+VolUp) and perform factory reset.
  2. If not fixed, replace touch panel (“digitizer”) — part is widely available.
  3. Do not use thick screen protectors, as edge touch becomes unreliable (reported by several forum users).
See also
Digma Optima Prime 4 3G TT7174PG Firmware Flash File Download [Stock Rom]

4. SIM Not Detected, No Network

  • Symptoms: “Insert SIM” message or no mobile network after flashing.
Solution:
  1. Use Download Only mode to prevent IMEI loss (flashing “Format All” erases modem data).
  2. If IMEI is lost, restore via legal repair service with device SN and original IMEI (backup if possible).

5. Bootloop or Logo Freeze

  • Symptoms: Tablet stuck at logo after flash, never boots Android desktop.
Solution:
  1. Re-flash using another USB port/cable; avoid using laptop battery mode to prevent flash interruption.
  2. Remove SD card and retry. Corrupted flash can cause bootloop if SD present.
  3. Try factory reset from recovery post-flash if system remains stuck.

Frequently Asked Questions

Why does my touch work only near the center?
Either firmware was corrupted or physical digitizer is faulty—a full flash resolves software, otherwise hardware replacement is required .
Is it possible to upgrade beyond Android 7.0?
No. PS7165MG supports Android 7.0 only, no stable custom ROMs exist.
SP Flash Tool won’t detect my tablet—what next?
Reinstall drivers, try on another PC, or use a different cable. On Windows 10+, disable signature checks before driver install.
Battery drops from 50% to 20%—is ROM faulty?
Usually aging battery, but new firmware resets battery file and may improve accuracy after 2-3 full cycles.
IMEI shows null after flash?
Restore using NVRAM backup or qualified IMEI tool (legal use only); avoid Format All if you don’t have a backup.
See also
Digma Linx Joy 3G LT5048MG Firmware Flash File Download [Stock Rom]

Conclusion

Flashing official firmware restores Digma Plane 7552M 3G PS7165MG to working order, eliminating malware, lag, SIM/network, and charging faults. Stick to the exact ROM and recommended SP Flash Tool process for best results. Share your recovery tips below to help other Digma users!

LATEST FIRMWARE FILE

LEAVE A REPLY

Please enter your comment!
Please enter your name here