Digma Linx Pay 4G LS5053ML Firmware Flash File Download [Stock Rom]

The Digma Linx Pay 4G (LS5053ML) is a budget smartphone from 2018, specifically designed to bring NFC contactless payment capabilities to the entry-level market. It featured a modern 18:9 aspect ratio display, a fingerprint scanner, and ran Android 8.1 Oreo. Despite its features, its MediaTek MT6739 processor and 2GB of RAM can become a bottleneck over time. For owners looking to fix software bugs, particularly those related to its core NFC feature, or to unbrick a faulty device, flashing the official stock firmware is the most reliable solution.

This guide provides the official firmware package and a clear, safe path to reinstalling the software on your device.

Digma Linx Pay 4G (LS5053ML) Firmware Details

Below are the key specifications for this official firmware package:

Why Flash the Stock Firmware?

Based on user reports and device specifications, reinstalling the official firmware can resolve several known issues on the Linx Pay 4G:

1. Fix Unreliable NFC Functionality: Addresses software bugs that can cause the NFC chip to fail during contactless payments or not be detected by payment terminals.
2. Resolve Fingerprint Scanner Errors: A clean firmware install can fix issues where the rear fingerprint scanner becomes slow, inaccurate, or stops working entirely.

⚠️ Important Prerequisites

Before you begin, ensure you have the necessary drivers and tools. You will need to download the SP Flash Tool and install the correct MediaTek VCOM drivers on your computer. A full backup of your device data is also highly recommended as this process will erase everything.

Download Official Firmware for Digma Linx Pay 4G (LS5053ML)

• File Name: Digma_Linx_Pay_4G_LS5053ML_MT6739_V1.14_20181029.zip
• Size: 1 GB
• 🔗 Download Link (Google Drive): Digma Linx Pay 4G Firmware

How to Flash the Firmware

This device’s firmware uses a scatter file and must be installed using the SP Flash Tool. Here is a summary of the main steps:

1. Download and extract the firmware package: Digma_Linx_Pay_4G_LS5053ML_MT6739_V1.14_20181029.zip.
2. Install the correct MediaTek VCOM USB drivers on your PC.
3. Launch the SP Flash Tool and load the MT6739_Android_scatter.txt file from the extracted folder.
4. Power off your Digma Linx Pay 4G. As this model has a non-removable battery, ensure it is fully powered down by holding the power button.
5. Set the flashing mode to “Download Only” and click the “Download” button.
6. Connect the device to your computer via USB to initiate the flash.

For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: Flashing firmware carries inherent risks. If instructions are not followed precisely, it could damage your device. We are not responsible for any data loss or damage. Proceed with caution.