The Digma Hit 3G (HT7070MG) is a 7-inch tablet from 2015, designed as a highly affordable entry into the world of Android devices. Running the classic Android 4.4 KitKat, its primary function was for basic media consumption and browsing. Due to its very limited 512MB of RAM, the device is prone to severe performance issues with modern applications. For owners looking to restore this tablet to its original, lightweight state or fix software errors, flashing the official stock firmware is the only reliable solution.
This guide provides the official firmware package and a clear, safe path to reinstalling the software on your device.
Digma Hit 3G Firmware Details
Below are the key specifications for this official firmware package:
| Attribute | Details |
|---|---|
| 📱 Device | Digma Hit 3G (HT7070MG) |
| 🆔 Chipset | MediaTek MT6582 |
| 🤖 Android OS | 4.4 KitKat |
| 🔢 Build Number | R1_20151106 |
| 📂 File Type | Scatter Firmware |
| 💻💻 Flashing Tool | SP Flash Tool |
Why Flash the Stock Firmware?
Reinstalling the official firmware is the best solution for a variety of critical software issues on the Digma Hit 3G:
- Unbrick Your Tablet: Revives a device that fails to boot past the Digma logo or is completely unresponsive.
- Restore Performance: On a device with only 512MB of RAM, a clean firmware flash is essential to clear out junk files and restore usability.
- Eliminate Viruses: A complete flash is the most thorough method for removing old or persistent malicious software.
- Fix System Errors: Resolves common issues like “Unfortunately, Google Play Services has stopped” that can plague older Android versions.
⚠️ Important Prerequisites
Before you begin, ensure you have the necessary drivers and tools. You will need to download the SP Flash Tool and install the correct MediaTek VCOM drivers on your computer. A full backup of your device data is also highly recommended as this process will erase everything.
Download Official Firmware for Digma Hit 3G
- File Name: Digma_Hit_3G_HT7070MG_MT6582_R1_20151106.zip
- Size: 356 MB
- 🔗 Download Link (Google Drive): Digma Hit 3G Firmware
How to Flash the Firmware
This device’s firmware uses a scatter file and must be installed using the SP Flash Tool. Here is a summary of the main steps:
- Download and extract the firmware package:
Digma_Hit_3G_HT7070MG_MT6582_R1_20151106.zip. - Install the correct MediaTek VCOM USB drivers on your PC, ensuring they are compatible with older devices.
- Launch the SP Flash Tool and load the
MT6582_Android_scatter.txtfile from the extracted folder. - Power off your Digma Hit 3G tablet. It is recommended to remove and reinsert the battery to ensure it is fully off.
- Set the flashing mode to “Download Only” and click the “Download” button.
- Connect the device to your computer via USB to initiate the flash.
For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:
→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones
Disclaimer: Flashing firmware carries inherent risks. If instructions are not followed precisely, it could damage your device. We are not responsible for any data loss or damage. Proceed with caution.
