The Cubot King Kong 7 is a premium rugged Android launched globally in 2022, featuring a 6.36″ FHD+ display (2300×1080 px, 403ppi), Helio P60 MT6771 octa-core CPU, 8GB RAM, 128GB storage (expandable), massive 5000mAh battery, and a triple-lens 64MP rear camera (16MP ultra-wide, 5MP macro) plus a 32MP selfie lens. Certified IP68/IP69K/MIL-STD-810G, it runs a snappy Android 11 interface and is built to survive harsh environments—ideal for the outdoors or heavy industry.
Owners highlight real problems: screen freezing or ghost taps after updates, slow UI or battery drain, poor night camera, Bluetooth dropouts, random deep sleep bugs, and rare bootloop or SIM failures.. Flashing the correct regional King Kong 7 firmware (scatter/PAC) resets the system, corrects touch, restores camera/Bluetooth, and solves nearly all persistent bugs.
Critical Notice: Before You Proceed
Flashing Cubot King Kong 7 firmware wipes all user data, Google accounts, and network info. Backup contacts, Google, photos, and IMEI before flash! Always choose the proper region file—wrong build may break LTE bands, touch, or camera forever.
Quick Device Specs (Cubot King Kong 7)
- Device:
- Cubot King Kong 7 (MT6771/P60)
- Release:
- 2022
- Chipset:
- MediaTek Helio P60 MT6771 octa-core, Mali-G72
- Display:
- 6.36″ FHD+ IPS LCD, 2300×1080px, Gorilla Glass
- Battery:
- 5000 mAh, non-removable
- RAM / Storage:
- 8GB RAM / 128GB internal, up to 256GB microSD
- OS:
- Android 11 (stock, global)
- Cameras:
- 64MP f/1.8 main, 16MP ultra-wide, 5MP macro, 32MP selfie (all with night/AI modes)
- Other:
- IP68/69K/MIL-STD, dual nano-SIM 4G+, NFC, Bluetooth 5, USB-C, stereo speakers.
Required Downloads
- SP Flash Tool (latest)
- MediaTek VCOM USB Drivers
- Cubot_King_Kong_7_MT6771_V06_210729.zip (July 2021, global/early)
- KINGKONG 7_B031C_V09_20220707.zip (Non-US, July 2022, latest)
- KINGKONG 7_B031C_V07_20211120.zip (Non-US, November 2021)
| Filename / Version | Region | Android | Release | Link |
|---|---|---|---|---|
| Cubot_King_Kong_7_MT6771_V06_210729.zip | Global / Early | 11 | Jul 2021 | Google Drive |
| KINGKONG 7_B031C_V09_20220707.zip | Non-US / Latest | 11 | Jul 2022 | Mega |
| KINGKONG 7_B031C_V07_20211120.zip | Non-US | 11 | Nov 2021 | Mega |
How to Flash Cubot King Kong 7 Firmware (SP Flash Tool)
- Extract the zip, load MT6771_Android_scatter.txt into SP Flash Tool.
- Install VCOM drivers, disable driver signature enforcement on Windows if needed.
- Power off device, connect via USB (hold Vol Down if undetected).
- Use “Download Only” mode, press Download, and wait for the green check.
- Reboot and verify all hardware works—test touch, camera, SIM, Bluetooth, and GPS.
- Step-by-step visuals: Inarguide’s MTK flash tutorial.
King Kong 7: Real Bugs & Community Solutions
1. Touchscreen Freezing, Ghost Taps
Most common: screen freezes or registers random taps, especially after OTA/update. Flashing the latest official regional firmware usually restores touch layer.
2. Battery Drains Faster Than Claimed
Many users struggle to get a true “2-day battery”—full charge/discharge cycles post-flash, disabling 4G and high-brightness, and closing unused apps maximizes uptime.
3. Camera Blurry or Night Mode Fails
Camera is great in sunlight, poor at night. Stock firmware fixes app crashes; third-party apps rarely help. Use AI mode and avoid digital zoom.
4. Bluetooth Will Not Pair / Drops Audio
Bluetooth 5 can skip or stutter after updates. Forget/re-pair device, use latest stock ROM, and avoid simultaneous WiFi hotspot for best results.
5. No SIM/Network After Flash or Reset
If SIM dead or “No Service,” check that you flashed the correct region file and reset APN/network. Backup IMEI prior to any update or flash.
6. Device Does Not Wake from Deep Sleep
Hold Power+VolUp for 15 seconds for forced reboot. Use updated firmware for best deep sleep/resume compatibility.
7. Lag or Slowdown After Months
8GB RAM should keep things brisk—lag often caused by bloat, too many widgets, or app cache. Flashing and minimizing installed apps helps.
FAQs: Cubot King Kong 7 Firmware & Owner Support
- Which firmware to use?
- Latest Non-US for most regions; July 2021 for early global units. Only flash MT6771-specific builds.
- Touch not working after update?
- Reflash correct region firmware; do not use Cubot X30 or other models’ files.
- Bluetooth or camera issues post-flash?
- Delete old pairings, reset network, and stick to the stock Camera app only.
- Deep sleep bugs—phone won’t wake?
- Hold Power+VolUp for forced restart; update to the latest ROM.
- Will flashing delete data/IMEI?
- Yes, save all accounts, IMEI, and backups before using SP Flash Tool.
Closing & Call to Action
Flashing Cubot King Kong 7 firmware (SP Flash Tool, MT6771) revives stuck, laggy, or broken devices—solves touch, camera, Bluetooth, battery, and network bugs. Bookmark and report new issues to help fellow Cubot users.
