If your Cubot Dinosaur is experiencing GPS drift during navigation, camera app crashes, intermittent charging errors, or random bootloops, flashing the official stock firmware provides the most reliable solution. This expert guide delivers verified firmware downloads, concise SP Flash Tool instructions, and a troubleshooting section tailored to the Dinosaur’s MT6735 platform.
🚨 Critical Pre-Flash Warning
Flashing firmware will erase all data on your Cubot Dinosaur, including photos, apps, and settings. Back up your data first. Incorrect SP Flash Tool use can damage IMEI—follow instructions precisely. For detailed steps, visit: Complete MediaTek Flashing Guide.
Device Specifications Verification
Confirm these match your device:
| Specification | Details |
|---|---|
| Device Name | Cubot Dinosaur |
| Chipset | MediaTek MT6735 (28nm, Quad-Core 1.3 GHz) |
| GPU | ARM Mali-T720 MP1 @ 450 MHz |
| Display | 5.0″ IPS LCD, 1280×720 HD |
| RAM/Storage | 2 GB RAM / 16 GB internal |
| Battery | 3000 mAh removable Li-Ion |
| Android Version | Android 6.0 Marshmallow |
| Key Features | 13 MP rear + 5 MP front camera, GPS, proximity sensor |
Official Firmware Downloads
| Filename | Date | Size | Download Link |
|---|---|---|---|
| Cubot_Dinosaur_V10_20160516.zip | May 2016 | 1.16 GB | MediaFire |
| Cubot_Dinosaur_MT6735_V16_20170817_6.0.zip | Aug 2017 | 1.13 GB | MediaFire |
⭐ Recommendation: Use the August 2017 V16 build for updated GPS configuration, improved camera ISP fixes, and enhanced charging-IC calibration for the MT6735 chipset.
Required Tools & Drivers
- SP Flash Tool (latest version)
- MediaTek USB VCOM Drivers
- Cubot Dinosaur firmware package
Quick Flashing Instructions
- Install SP Flash Tool and VCOM drivers on Windows PC.
- Extract firmware and load
MT6735_Android_scatter.txt. - Select “Download Only” mode to preserve IMEI.
- Power off Dinosaur, click “Download,” then connect via USB.
- Wait for green checkmark and reboot the device.
Troubleshooting & Optimization Guide
1. GPS Drift & Lock Failures
- Symptoms: Location drifts > 30 m, slow fix time, navigation errors.
- Enable AGPS: Settings > Location > Wi-Fi & Bluetooth scanning.
- Clear A-GPS data via “GPS Test” app > Manage A-GPS state > Reset & Download.
- Use open sky for initial cold start.
- Flash V16 firmware to update GNSS driver almanac.
- Verify with GPS Test app for multi-constellation lock.
2. Camera App Crashes & Image Artifacts
- Symptoms: Camera force-closes, photos show artifacts or fail to save.
- Clear Camera app data: Settings > Apps > Camera > Clear Data & Cache.
- Test in manual mode to reduce ISP load.
- Flash V16 firmware to restore ISP calibration and driver stability.
- Use alternate camera app (Open Camera) if issues persist.
3. Intermittent Charging Errors
- Symptoms: Charging stops randomly, cable wiggle required, slow charge beyond 80%.
- Use original 5 V / 2 A charger and quality USB cable.
- Clean Micro-USB port with compressed air and isopropyl swab.
- Calibrate battery: drain to 0% then charge to 100% uninterrupted.
- Flash V16 firmware to update charging IC thresholds.
- Monitor current with “Ampere” app to ensure stability.
4. Unresponsive Touch & Dead Zones
- Symptoms: Edge taps unregistered, swipe lag, keyboard delays.
- Remove screen protector to restore sensitivity.
- Reduce pointer speed: Developer Options > Pointer Speed.
- Enable one-handed mode: Settings > Display > One-handed mode.
- Flash V16 firmware to update touch-panel drivers for MT6735M.
5. Random Bootloops & Crashes
- Symptoms: Device restarts on logo after app install or update.
- Wipe cache partition: Recovery > Wipe Cache.
- Uninstall recent apps in Safe Mode.
- Flash V16 firmware using “Download Only.”
- Perform factory reset if loops persist.
Unique Expert Recommendations
- Perform quarterly AGPS resets for consistent GPS performance.
- Use manual focus in camera app for better ISP stability.
- Replace cables annually to avoid charging connectors wear.
- Keep 500 MB free storage to prevent camera caching issues.
- Use Safe Mode to isolate app-related bootloops before flashing.
- Wipe cache partition after firmware flash to clear old artifacts.
- Calibrate battery monthly for accurate charge readings.
Conclusion
Flashing the Cubot Dinosaur V16 stock firmware resolves GPS drift, camera ISP crashes, charging errors, touch responsiveness, and bootloops on the MT6735M chipset. Follow SP Flash Tool instructions precisely and apply these targeted troubleshooting steps to maintain your Cubot Dinosaur’s performance.
Success? Share your experience below—let us know if V16 fixed your GPS or camera issues so other Cubot Dinosaur users can benefit!
