The CloudFone Thrill Boost 2 Plus is an ultra-budget Android Go smartphone with a 5.45‑inch 18:9 FWVGA+ display, MediaTek MT6580M quad‑core 1.3 GHz processor, 1 GB RAM, 8 GB storage (expandable up to 64 GB), 3G connectivity, and a 2200 mAh battery designed for light social use and basic apps.
Many owners report problems over time, including stuck-on-logo bootloops, extreme lag as storage fills, app crashes, failed system updates, FRP lock after reset, and devices that no longer boot properly after incorrect flashing or malware.
The Cloudfone_Thrill_Boost_2_Plus_MT6580_20190814_8.1.0.zip firmware is an official Android 8.1.0 stock ROM for the MT6580 Thrill Boost 2 Plus that can unbrick soft‑bricked phones, repair bootloops, remove software corruption, and cleanly reinstall the OS via SP Flash Tool when used correctly.
CloudFone Thrill Boost 2 Plus Firmware Details
| Device Name | Model Identifier | Chipset | Android Version | Firmware Version / Name | Build Date (ROM) | File Size | File Type | Flashing Tool | Bootloader Status | Region / Notes |
|---|---|---|---|---|---|---|---|---|---|---|
| CloudFone Thrill Boost 2 Plus | MT6580M Android Go variant | MediaTek MT6580M, quad‑core 1.3 GHz Cortex‑A7, Mali‑400 GPU | Android 8.1.0 Oreo (Android Go Edition) | Cloudfone_Thrill_Boost_2_Plus_MT6580_20190814_8.1.0.zip | 2019‑08‑14 firmware build (Oreo Go) | ≈782 MB compressed zip (scatter + images)[user prompt] | Scatter-based MT6580 stock ROM archive (includes MT6580_Android_scatter, system.img, boot.img, etc.) | SP Flash Tool (MediaTek) | Bootloader typically locked; flashing via MTK preloader download mode | Philippines budget device; intended for CloudFone Thrill Boost 2 Plus only, not for Thrill Boost or other models |
Flashing the wrong MT6580 ROM or incorrect SP Flash Tool options can permanently brick your CloudFone Thrill Boost 2 Plus, erase all data, and corrupt IMEI/NVRAM. Confirm that your phone is “CloudFone Thrill Boost 2 Plus” with MT6580M, back up important data and NVRAM, keep the battery above 60%, and never disconnect the USB cable or power off the PC while flashing.
Download Official Firmware for CloudFone Thrill Boost 2 Plus
| Filename | Region | File Size | Build Date | Build Version | Android Version | Flashing Type | Notes / Target | Download Links |
|---|---|---|---|---|---|---|---|---|
| Cloudfone_Thrill_Boost_2_Plus_MT6580_20190814_8.1.0.zip | Philippines / CloudFone Thrill Boost 2 Plus MT6580M only | ≈782 MB compressed | 2019‑08‑14 Android 8.1.0 Go factory build | Android Go Oreo 8.1.0 stock firmware for Thrill Boost 2 Plus | Android 8.1.0 (Go Edition) | SP Flash Tool “Download Only” or “Firmware Upgrade” (scatter) | Use to unbrick, fix logo/bootloop, resolve severe lag and crashes, and clear FRP/lock issues (where legally allowed) on the Thrill Boost 2 Plus MT6580M. | Download CloudFone Thrill Boost 2 Plus Firmware (Google Drive) |
Flashing Requirements
- CloudFone Thrill Boost 2 Plus with confirmed MT6580M chipset and at least 60% battery charge.
- Cloudfone_Thrill_Boost_2_Plus_MT6580_20190814_8.1.0.zip extracted on a Windows PC, showing MT6580 scatter and partition images.
- SP Flash Tool (latest compatible version) installed, plus correct MediaTek VCOM/Preloader USB drivers.
- Good-quality USB cable and a stable USB port (avoid hubs) to minimize disconnection risk.
- Backup of user data and, where possible, NVRAM/IMEI before flashing, as some modes can wipe network calibration and internal storage.
How to Flash the Firmware
- Install MTK VCOM drivers, then extract SP Flash Tool and the Cloudfone_Thrill_Boost_2_Plus_MT6580_20190814_8.1.0 firmware into separate folders on your PC.
- Open SP Flash Tool, click “Scatter‑loading,” and select the MT6580_Android_scatter.txt file from the firmware folder so all partitions (preloader, boot, system, userdata, etc.) are loaded.
- Choose “Download Only” for a simple reinstall or “Firmware Upgrade” for deeper repair, decide carefully about including preloader, then click the Download button.
- Power off the Thrill Boost 2 Plus, connect it to the PC via USB (holding a volume key may help trigger preloader mode), and wait while SP Flash Tool writes the firmware until you see a green success checkmark.
- Disconnect the phone and boot it up; the first startup on Android 8.1 Go may take several minutes while the system optimizes apps and completes initial setup.
For a full illustrated tutorial that matches MTK scatter firmware like this one, follow this MediaTek SP Flash Tool step-by-step guide before flashing your CloudFone Thrill Boost 2 Plus.
Flashing stock or custom firmware involves risk. This website and the firmware providers are not responsible for bricked CloudFone Thrill Boost 2 Plus units, corrupted NVRAM/IMEI, data loss, or any other damage caused by using the MT6580 8.1.0 files or methods described here. By downloading and flashing, you accept full responsibility for your actions and their consequences. If you experience issues, describe your problem in the comments so other users and technicians can assist while you remain solely accountable for your device.
Frequently Asked Questions (FAQs)
What problems can this CloudFone Thrill Boost 2 Plus firmware fix?
This ROM can repair stuck-on-logo bootloops, endless restart cycles, serious lag, frequent app crashes, and system corruption caused by failed updates, malware, or incorrect tweaks on the Thrill Boost 2 Plus. It is especially useful when the phone is soft‑bricked but still detected by a PC as an MT6580 device.
Is this firmware only for the CloudFone Thrill Boost 2 Plus?
Yes, the Cloudfone_Thrill_Boost_2_Plus_MT6580_20190814_8.1.0.zip build is made specifically for the Thrill Boost 2 Plus MT6580M; flashing it on the original Thrill Boost, Thrill Boost 2, or any other MT6580 phone can permanently hard‑brick those devices. Always confirm the exact model name on the box, label, or Settings > About phone.
Will this firmware upgrade Android beyond 8.1?
No, this package keeps the phone on Android 8.1.0 Oreo Go and focuses on restoring a clean, stable system rather than major OS upgrades. Custom ROMs would be needed for newer versions, but those often introduce bugs and compatibility risks on low‑end MT6580 hardware.
SP Flash Tool does not detect my Thrill Boost 2 Plus. What can I try?
Reinstall MTK VCOM drivers, change the USB cable and port, power the phone fully off, and connect while holding Volume Up or Down to trigger preloader mode. Avoid USB hubs and close other MTK tools so SP Flash Tool can communicate properly with the MT6580 device.
