BQ Mobile BQ-7000G Charm Stock Firmware ROM (Flash File) – SPD (UNISOC)

The BQ Mobile BQ-7000G Charm is a budget-friendly Android smartphone developed by BQ for everyday use. Launched in late 2019, it is powered by a Spreadtrum/UNISOC chipset, runs on Android 8.1 Oreo, and comes with a compact design tailored for basic users who need a reliable device for calls, messaging, and lightweight apps.

While the BQ-7000G Charm is a stable device, software problems can occur over time. Some users face bootloop issues, lag, failed updates, or bricked phones. In such cases, flashing the official BQ Mobile BQ-7000G Charm stock firmware is the safest and most effective solution. The firmware package provided here can restore the device to factory settings, fix bugs, and revive non-booting phones.

On this page, you will find the official BQ Mobile BQ-7000G Charm firmware (V1.1, 2019-10-08) along with required tools and drivers. Since this model uses a Spreadtrum (UNISOC) processor, the correct flashing method is via the SPD Upgrade Tool. A detailed tutorial is available in our SPD flashing guide.

⚠️ Critical Notice – Before You Proceed

Flashing stock ROM will erase all data on your BQ-7000G Charm, including contacts, apps, and media.
👉 Always backup your important files before starting.
👉 This guide is for advanced users only. Improper flashing can permanently damage your smartphone.
👉 Proceed with caution and follow instructions carefully.

Quick Device Specifications

Device Name:
BQ Mobile Charm
Model Number:
BQ-7000G
Release Year:
2019
Chipset:
Spreadtrum/UNISOC
Display:
6.0-inch HD+ (720 × 1440 pixels)
Battery:
3000mAh (approx.)
RAM/Storage:
2GB RAM / 16GB storage (expandable)
Operating System:
Android 8.1 Oreo
Special Features:
Dual SIM, budget-friendly design

Required Downloads

Firmware Download Table

BQ Mobile BQ-7000G Charm Official Firmware
Build Version Android Version Chipset Download Link
V1.1_20191008 Android 8.1 Oreo Spreadtrum / UNISOC Download (Google Drive)

How to Flash BQ Mobile BQ-7000G Charm Firmware

Since the BQ-7000G Charm uses a Spreadtrum chipset, the flashing process requires the SPD Upgrade Tool. Below is a simplified overview. For detailed steps, see our SPD Flashing Guide.

  1. Download and extract the official firmware package on your computer.
  2. Install the Spreadtrum USB drivers to ensure PC-device communication.
  3. Open the SPD Upgrade Tool and load the firmware .pac file.
  4. Turn off your phone and connect it to the PC via USB.
  5. Click “Start Downloading” in the SPD tool to begin flashing.
  6. Wait for the progress bar to complete successfully.
  7. Disconnect and reboot your phone. The first boot may take several minutes.

Troubleshooting Common Problems

1. Device Not Detected in SPD Tool

If the BQ-7000G Charm is not recognized, ensure you installed the correct Spreadtrum USB drivers. Try using a different USB port or cable. Enabling “USB debugging” in developer options before flashing can also help.

2. Bootloop After Flashing

If the phone gets stuck at the BQ logo, perform a factory reset via recovery mode. If the issue persists, reflash the firmware using the “Erase all + Download” option.

3. No Network Signal

IMEI may be lost during flashing. Restore IMEI using the WriteIMEI tool or repair software compatible with Spreadtrum chipsets.

4. App Crashes or Lag

After flashing, always perform a factory reset to clear old cache data. This helps stabilize system performance and reduce random app crashes.

Frequently Asked Questions (FAQs)

Does this firmware work on all BQ-7000G units?
Yes, but make sure your device is specifically the BQ Mobile BQ-7000G Charm to avoid compatibility issues.
Can flashing this stock ROM remove FRP lock?
No, FRP lock remains after flashing. You must enter your Google account credentials during setup.
Will flashing erase my IMEI?
In most cases, no. However, if you use “Erase all” mode, IMEI may be deleted and will need to be restored.
Can I downgrade my BQ Mobile BQ-7000G firmware?
Downgrading is risky and not recommended. The V1.1_20191008 firmware is the stable official release.
Does flashing remove root?
Yes, flashing the official firmware will remove any previous root access or custom modifications.

Conclusion

Installing the official BQ Mobile BQ-7000G Charm stock firmware is the most effective way to fix bootloop, unbrick, or restore system stability. The provided firmware package (V1.1_20191008, Android 8.1, SPD) is fully compatible with the device and ensures reliable performance.

Bookmark this page for updates, and if the download link is broken, let us know in the comments. Flashing the correct stock ROM helps extend your smartphone’s lifespan and ensures smooth operation.

Daniel
Daniel

With more than 7 years of experience in the Mobile software field (though not consistent), I hope I can be of great service to you in providing you with the firmware files that works, flashing guides that won't brick your phone and a new mobile experience.

Articles: 7624

Leave a Reply

Your email address will not be published. Required fields are marked *