The BQ Mobile BQ-5044 Strike LTE is an affordable 4G smartphone launched with a 5-inch HD display and running on a MediaTek MT6737M quad-core processor. Designed for essential communication, social media, and light app use, it features reliable LTE connectivity and a modest all-day battery. This article provides the latest official firmware download along with a step-by-step flashing guide and troubleshooting tips tailored for this model.
Quick Device Specs
- Device: BQ Mobile BQ-5044 Strike LTE
- CPU: MediaTek MT6737M, Quad-Core
- RAM: 1 GB
- Internal Storage: 8 GB (expandable)
- Display: 5.0″ IPS, 1280 x 720 pixels
- Battery: 2500 mAh
- Cameras: 13 MP (rear), 8 MP (front)
- Original OS: Android 7.0 Nougat
Required Downloads
- SP Flash Tool (latest version recommended)
- VCOM/MediaTek USB Drivers (for MTK devices)
- Firmware file: BQ_Mobile_BQ-5044_Strike_LTE_MT6737M_211117.zip
Official Firmware Download
| Device | Build | Type | Download |
|---|---|---|---|
| BQ-5044 Strike LTE | 211117 | Official Full ROM (Scatter) | Download (Google Drive) |
How to Flash Firmware on BQ-5044 Strike LTE
Flashing the official firmware on the BQ-5044 Strike LTE can recover a bricked device, resolve boot loops, or restore factory conditions. This process uses the SP Flash Tool since the device is built on MediaTek hardware. You’ll need a Windows PC, a USB cable, and the files listed above. For a complete, device-agnostic visual guide with screenshots, see the detailed pillar article:
How to Flash Stock Firmware to MediaTek (MTK) Smartphones using SP Flash Tool
Device-Specific Troubleshooting for BQ-5044 Strike LTE
- LTE or mobile data not working: After flashing, some users may notice LTE signal dropouts or inability to register on the network. Double-check that the correct APN settings for your carrier are entered, and ensure 4G/LTE is enabled in
Settings > Network & Internet > Mobile Network. If issues persist, reset network settings and toggle airplane mode. A mismatched region/country firmware can cause modem incompatibility, so always flash the correct file for your area. - Bootloop after flashing: Make sure to perform a factory reset in recovery mode after flashing to clear out old data that could conflict with the new firmware. Most bootloops after flashing stem from data mismatches.
- Poor performance or freezing: The MT6737M chip is basic and paired with only 1GB RAM. For smoother use, keep background apps minimal, and consider disabling heavy animations. If the problem started after a specific app or Android update, a factory reset is recommended.
- Touchscreen or sensor issues: These rarely occur after official firmware installation, but if you experience unresponsive sensors (auto-rotation failing, proximity sensor not working), try rebooting the phone first. If unresolved, re-flash the official firmware and verify the integrity of your hardware to rule out faults.
FAQs
Q1. Does flashing this firmware erase all my data?
Yes. This is a full ROM flash using SP Flash Tool, which overwrites the system and data partitions. Back up photos, contacts, and important files first.
Q2. My phone is dead and won’t turn on. Can this firmware help?
If the issue is software-related (e.g., a failed update or corrupted system), this firmware can fix it as long as the device is still detected by your PC in Device Manager (even as an “MTK USB Port”). If there is no response at all (no lights or vibration), deeper hardware repair may be needed.
Q3. SIM card not detected after flashing?
Double-check that the baseband version displays in Settings > About Phone. If blank or “Unknown,” repeat the flashing process and ensure “Preloader” is ticked in SP Flash Tool. If the SIM is still not detected, your device may need IMEI repair with a valid backup (nvram.img).
Q4. Which tool should I use if my phone is stuck at 0% and not flashing?
Try using a different USB port/cable, ensure all drivers are installed correctly, and run SP Flash Tool as Administrator on Windows. Some PCs require disabling driver signature enforcement for proper MTK driver installation.
Need more help? See the full MediaTek SP Flash Tool flashing guide or contact BQ support for hardware-related issues.
