This page provides the official download link for the BQ Mobile BQ-5008L Brave stock firmware. Released in 2018, the BQ-5008L Brave was a budget-friendly smartphone aimed at providing a complete Android experience with 4G LTE connectivity. It is powered by the quad-core MediaTek MT6737M chipset, features a 5.0-inch HD display, and runs on Android 7.0 Nougat.
Over time, devices in this category can suffer from software issues like performance degradation, becoming stuck in a bootloop, or being infected with malware. The most effective solution to these problems is to reinstall the official stock ROM. This flash file will completely restore your phone’s software to its original factory condition, fixing all bugs and glitches. This guide provides the necessary files to unbrick your BQ-5008L Brave and make it run smoothly again.
User Data Advisory for the BQ Mobile BQ-5008L Brave
CRITICAL NOTICE: The firmware flashing procedure will perform a full data wipe, permanently erasing all personal files from your phone’s internal storage. This includes photos, contacts, apps, and documents. It is imperative that you back up all your important data before you start. Proceed with this guide at your own risk.
BQ Mobile BQ-5008L Brave: Quick Device Specifications
- Device Name:
- BQ Mobile BQ-5008L Brave
- Release Date:
- May 2018
- Chipset:
- MediaTek MT6737M (28nm)
- Display:
- 5.0 inches, IPS LCD, 1280 x 720 pixels (HD)
- Battery:
- Li-Ion 2500 mAh, removable
- RAM/Storage:
- 2GB RAM, 16GB Internal Storage
- Original OS:
- Android 7.0 Nougat
- Special Features:
- 4G LTE, Scratch Resistant Glass
Required Downloads
Before proceeding, download the firmware package and the necessary tools and drivers from the links below. Extract them all into a single, easy-to-find folder on your computer.
- Firmware Package: The official ROM for the BQ-5008L Brave is available in the table below.
- SP Flash Tool: The official utility for flashing MediaTek chipsets.
- MediaTek VCOM USB Drivers: Essential for your computer to recognize the device.
Download BQ Mobile BQ-5008L Brave Stock Firmware
| Region / Build | Android Version | File Size | Download Link |
|---|---|---|---|
| V004 (Brave) | Android 7.0 Nougat | 1.32GB | Download (Yandex Disk) |
How to Flash the Firmware: 5 Key Steps
This is a high-level overview of the flashing process using SP Flash Tool. For a full, safe, and detailed guide, you must click through to our main pillar article linked below.
- Prepare Your PC: Download and install the required MediaTek VCOM USB drivers to ensure your computer can communicate with your phone.
- Load the Firmware: Launch SP Flash Tool and load the firmware by selecting the `…scatter.txt` file from the extracted firmware folder (e.g.,
MT6737M__BQru_BQ-5008L...Brave.rar). - Configure the Tool: Ensure the flashing mode is set to “Download Only.” This is the safest option and helps prevent the loss of your phone’s IMEI number.
- Initiate the Flash: Power off your phone completely and remove the battery. Click the large “Download” button within the SP Flash Tool to set it to standby.
- Connect Your Device: With the battery still out, immediately connect your phone to the PC with a USB cable to begin the flashing process, which finishes when a green “OK” checkmark appears.
Warning: This summary omits critical steps. For the complete, illustrated guide, please visit our main article: How to Flash Stock Firmware on MediaTek Smartphones.
Troubleshooting Common Issues
1. SP Flash Tool BROM ERROR 4032
Cause: This is a classic communication error on older MediaTek devices. It typically means there is an issue with the USB drivers, the SP Flash Tool version, or the connection timing when the tool tries to access the phone’s memory.
Solution: Ensure the VCOM drivers are correctly installed (a PC reboot is recommended). Try a different USB port and a high-quality cable. The most common fix for this error is timing: click “Download,” remove the phone’s battery, connect the phone, and then reinsert the battery. This often forces the correct handshake.
2. Invalid IMEI or No SIM Card Detected
Cause: This serious issue occurs when the NVRAM partition, which stores your phone’s unique IMEI numbers, is corrupted or erased. This almost always happens if you use the “Format All + Download” option in SP Flash Tool.
Solution: To prevent this, ALWAYS use “Download Only” mode. If the damage is done, you will need an advanced tool like Maui META to rewrite the original IMEI numbers (found on a sticker under the battery) to the phone.
3. “Storage Space Running Out” Warning
Cause: The BQ-5008L Brave comes with 16GB of storage. After the Android OS and pre-installed apps, the usable space is significantly less. Modern apps and their data can quickly fill up the remaining storage.
Solution: After a clean flash, use a microSD card for all photos and media. Go through the pre-installed apps and disable or uninstall any that you do not use. Regularly clear the cache for apps like Chrome and social media via Settings > Storage.
Frequently Asked Questions (FAQs)
- Can I upgrade the BQ Mobile BQ-5008L Brave to Android 8 Oreo?
- No. The firmware provided, Android 7.0 Nougat, is the final major software version that was officially released for the BQ-5008L Brave. There are no official updates to newer Android versions for this model.
- Will flashing this ROM remove the Google FRP lock?
- In most cases, yes. A full firmware flash with SP Flash Tool typically overwrites the partition that stores the Factory Reset Protection (FRP) lock. However, for stubborn locks, the “Format” tab in the tool can be used to manually erase the FRP address.
- Does the BQ-5008L Brave have a fingerprint scanner?
- No, the BQ-5008L Brave does not come equipped with a fingerprint sensor. Security is handled by standard Android methods like a PIN, pattern, or password.
- Is the battery for this phone removable?
- Yes, one of the user-friendly features of the BQ-5008L Brave is its 2500 mAh removable battery, which can be helpful for performing a hard reset if the device freezes.
Conclusion
Restoring your BQ Mobile BQ-5008L Brave with its official stock firmware is the definitive solution for overcoming software problems and restoring the device’s original performance. By using SP Flash Tool correctly and following the detailed instructions in our main pillar guide, you can successfully unbrick your phone. Always back up your data first and use the “Download Only” mode for a safe flash.
If this guide was helpful, or if a link is broken, please let us know in the comments below.
