This page provides the official download links for the BQ Mobile BQ-1082G Armor Pro stock firmware. This 10.1-inch tablet, released around 2018, was designed for users seeking a large screen and exceptional battery life, thanks to its massive 8000 mAh power cell. Powered by a UNISOC SC7731E chipset and 1GB of RAM, the device ran on either Android 7.0 Nougat or the more optimized Android 8.1 Oreo (Go Edition). While excellent for media consumption, its modest hardware can lead to significant software issues over time.
If your BQ-1082G Armor Pro is suffering from extreme lag, is stuck in a bootloop, or has been compromised by malware, reinstalling the official stock ROM is the definitive solution. This flash file will completely restore the tablet’s software to its original factory condition, eliminating all glitches and performance bottlenecks. Whether you need to unbrick your tablet or simply want a clean start, this guide provides all the necessary files and instructions to get your BQ Mobile BQ-1082G Armor Pro running smoothly again.
User Data Advisory for the BQ-1082G Armor Pro Tablet
CRITICAL NOTICE: The firmware flashing process will completely erase all data on your tablet’s internal storage. This includes all apps, photos, documents, and personal settings. It is imperative that you back up all critical files to a computer or cloud service before you begin. Proceed with this guide only if you understand and accept the risk of total data loss.
BQ-1082G Armor Pro: Quick Device Specifications
- Device Name:
- BQ Mobile BQ-1082G Armor Pro
- Release Date:
- 2018
- Chipset:
- UNISOC SC7731E (Quad-core 1.3 GHz)
- Display:
- 10.1 inches, IPS LCD, 1280 x 800 pixels
- Battery:
- Li-Po 8000 mAh, non-removable
- RAM/Storage:
- 1GB RAM, 16GB Internal Storage
- Original OS:
- Android 7.0 Nougat / Android 8.1 Oreo (Go Edition)
- Special Features:
- 3G Cellular Connectivity, Dual SIM Support
Required Downloads
Before you start the flashing process, download the following three components to your computer and extract them to a single folder for easy access.
- Firmware Package: The official operating system for the BQ-1082G Armor Pro. Select the desired version from the table below.
- SPD Upgrade Tool: The official software required to flash firmware onto devices with UNISOC/Spreadtrum chipsets.
- Spreadtrum USB Drivers: Essential for your PC to correctly recognize the tablet in flashing mode.
Download BQ-1082G Armor Pro Stock Firmware
| Region / Build | Android Version | Chipset | Download Link |
|---|---|---|---|
| 191022 | Android 8.1 (Go Edition) | UNISOC SC7731E | Download (MediaFire) |
| 191015 | Android 8.1 (Go Edition) | UNISOC SC7731E | Download (Google Drive) |
| V2.1_190429 | Android 7.0 Nougat | UNISOC SC7731E | Download (MediaFire) |
| V2.1_190428 | Android 7.0 Nougat | UNISOC SC7731E | Download (AFH) |
| V1.8_180507 | Android 7.0 Nougat | UNISOC SC7731E | Download (MediaFire) |
| V1.8_180504 | Android 7.0 Nougat | UNISOC SC7731E | Download (AFH) |
How to Flash Firmware on BQ-1082G Armor Pro
This section provides a brief summary of the flashing process. As this is a “spoke” guide, we highly recommend consulting our main pillar article for detailed, step-by-step instructions with screenshots to avoid errors.
- Install Drivers: First, install the Spreadtrum USB Drivers on your PC. Restart your computer after the installation is complete.
- Launch Flashing Tool: Open the SPD Upgrade Tool application.
- Load Firmware: Click the gear icon (“Load Packet”) and navigate to your extracted firmware folder (e.g.,
BQ_Mobile_BQ-1082G_Armor_Pro_..._8.1_SPD.zip). Select the firmware file, which will have a.pacextension. - Prepare Tablet: Power down your BQ-1082G Armor Pro completely. To be certain, press and hold the Power button for 15 seconds.
- Initiate Flash: Click the “Start Downloading” (play) button in the SPD tool.
- Connect Tablet: While holding the Volume Down button on the tablet, connect it to your computer using a reliable USB cable. The tool will detect the device and the flashing process will begin.
- Complete Process: Wait patiently for the process to finish. It will show a green “Passed” message upon completion. The tablet will then reboot automatically. The first boot may take up to 10 minutes.
For a complete walkthrough, please visit our comprehensive guide: How to Use the SPD Upgrade Tool to Flash Your Smartphone.
Troubleshooting Common Issues
1. Tablet is Very Slow and Unresponsive
Cause: The combination of a large 10.1-inch HD screen, a budget UNISOC processor, and only 1GB of RAM means the device is easily overwhelmed by modern applications and multitasking.
Solution: For the best performance, flash the Android 8.1 (Go Edition) firmware, as it’s optimized for low-RAM devices. After setup, immediately disable automatic app updates in the Play Store. Use “Go” and “Lite” versions of popular apps (e.g., YouTube Go, Facebook Lite). Avoid using live wallpapers and limit the number of widgets on your home screen.
2. Battery Drains Quickly or Charges Extremely Slowly
Cause: The huge 8000 mAh battery lacks modern fast-charging support, so charging will naturally take a long time (often 6-8 hours). Rapid drain is usually caused by the large screen at high brightness or background apps consuming power.
Solution: Always use a high-quality 2A/5V power adapter and a good USB cable for charging. To reduce drain, lower the screen brightness manually and shorten the screen timeout period. After flashing, perform a full charge cycle (from under 10% to 100% uninterrupted) to help the OS calibrate battery statistics.
3. SPD Tool Doesn’t Detect the Tablet
Cause: This is almost always a USB driver issue or an improper connection sequence.
Solution: Ensure you have uninstalled any other mobile phone drivers (like Qualcomm or MediaTek) from your PC. Reinstall the provided Spreadtrum drivers and reboot. Use a USB port on the back of your computer, as these are often more stable. Make sure the tablet is fully powered off before connecting it while holding the Volume Down key.
Frequently Asked Questions (FAQs)
- Can I upgrade from Android 7.0 to 8.1 using these files?
- Yes. Since both firmware versions are official for the BQ-1082G Armor Pro, you can flash the Android 8.1 (Go Edition) file over an existing Android 7.0 installation to upgrade. The process is the same, but remember it will completely wipe your device.
- What is the difference between the various V1.8 and V2.1 builds for Android 7.0?
- These are minor revisions released by the manufacturer, likely containing small bug fixes or security patches. For Android 7.0, it is generally best to flash the newest version available (V2.1) for the most stability.
- Will flashing this firmware remove the Google FRP lock?
- Yes, flashing the official stock ROM on your BQ-1082G Armor Pro will completely reinstall the operating system, which typically removes the Factory Reset Protection (FRP) lock associated with a previous Google account.
- Is it safe to downgrade from Android 8.1 back to 7.0?
- While it is possible, downgrading is generally riskier than upgrading and can sometimes cause issues. We recommend staying on the more optimized Android 8.1 Go Edition for the BQ-1082G Armor Pro due to its better performance on low-RAM devices.
Conclusion
Restoring your BQ-1082G Armor Pro tablet with the official stock firmware is the most effective method to solve software-related problems and restore its original functionality. By choosing the right firmware version and carefully following the flashing guide, you can overcome performance issues and enjoy your large-screen device for media consumption as intended.
If you have any questions or if a download link is not working, please let us know in the comments section below. Bookmark our site for more firmware files and tech guides.
