The BQ-1020L RU is a versatile 10.1-inch entry-level Android tablet ideal for browsing, reading, and light home use. Powered by the Spreadtrum SC9832E SoC, it offers LTE, 1GB RAM, and an IPS screen. If your device is slow, won’t boot, drains battery fast, or won’t connect to Wi-Fi or PC, this official SPD firmware and tablet-focused fixes are for you.
Quick Device Specs
- Model: BQ-1020L RU
- Chipset: Spreadtrum SC9832E (quad-core, 1.4GHz)
- RAM: 1 GB
- Storage: 16 GB (expandable, microSD)
- Display: 10.1″ IPS, 1280 x 800 px
- Battery: 5000 mAh
- OS: Android 10
Required Downloads
- SPD/Unisoc Upgrade Tool (latest recommended)
- Spreadtrum/Unisoc USB Drivers
- BQ_Mobile_BQ-1020L_RU_V2.0_201029_10_SPD.zip (firmware below)
Official Firmware Download
| Device | Firmware | Type | Download |
|---|---|---|---|
| BQ-1020L RU | V2.0_201029_10 | Official PAC ROM (SPD) | Download V2 (Google Drive) |
How to Flash Firmware on BQ-1020L RU Tablet (SPD)
Use the SPD Upgrade Tool and matching drivers to install the correct PAC firmware. Flashing erases all user data. Always fully charge your tablet, confirm driver installation, and use a good-quality USB cable for reliable connection. For a step-by-step illustrated walk-through, follow our master SPD flashing guide:
How to Use the SPD Upgrade Tool to Flash Your Smartphone
Device-Specific Troubleshooting for BQ-1020L Tablet
- Won’t turn on/charging poorly: Inspect the USB port for dust, try a known-good cable and charger, and charge for 30+ minutes before reattempting. Replace battery only as a last resort.
- Sluggish performance: Entry-level specs mean the tablet runs smoother with only basic/lightweight apps, minimal multitasking, and by regularly clearing cache and unused files. Factory reset after flashing can help restore speed.
- Display/touch issues: Remove screen film, clean display. If screen is still unresponsive or glitchy after flash, verify you used the correct PAC file and try a clean reflash.
- Wi-Fi/4G connection issues: Toggle Airplane mode, forget and rejoin Wi-Fi, or reset network settings. If still faulty after a fresh ROM, verify SIM and restart the tablet.
- FRP or Google Account lock after flash: Enter original Google credentials. Severe cases may require using an SPD FRP bypass tool. Do not hard-reset without unlinking your Google account if reselling.
FAQs
Q1. Will firmware flashing erase apps and files?
Yes. Always back up important files before flashing.
Q2. Tablet unresponsive to SPD flash/PC not detecting?
Reinstall SPD drivers, try another USB port/cable, or restart PC. Hold Power for 15+ seconds to force restart.
Q3. Tablet battery drains too quickly after flashing?
Turn off background sync, minimize running apps, and recalibrate by charging to 100%, then draining to 10% before recharging.
Q4. How to fix touch or display nonresponse after firmware?
Confirm build version, and reflash if firmware may not match your device. Persistent fault may point to hardware issue (check at service center).
Q5. Google lock after flash—what to do?
Sign in with most recent Google account linked before flash, or see a qualified technician for SPD FRP bypass tools.
Need more guided steps? Use our SPD Tablet Flashing Walkthrough for in-depth, illustrated help on firmware installations, recovery from errors, and common SPD/Unisoc tablet repairs.
