Match the exact model, region, and branch name. Similar model numbers are not the same device.
Firmware files are here on Inar Guide. Tutorials, flash tools and USB drivers are on FlashGuideHub.
The Bluboo Cielo is one of the earlier budget smartphones from Bluboo featuring a MediaTek MT6572 chipset and Android 7.0 operating system. Many users have reported problems such as bootloop after factory reset, device stuck on startup logo, frequent system lag, and camera not saving photos. These issues are mostly caused by corrupted system firmware or incorrect OTA updates.
Flashing the official Bluboo Cielo stock ROM helps fix these errors completely. It restores the device to factory condition, removes malware, and repairs software-related bugs such as no baseband or invalid IMEI. Below, you can find the verified firmware details and download links for this model.
Bluboo Cielo Firmware Details
| Device Name | Bluboo Cielo |
|---|---|
| Model | Cielo |
| Chipset | MediaTek MT6572 |
| Android Version | 7.0 (Nougat) |
| Firmware Version | V0.6_170915 |
| Build Date | 15 September 2017 |
| File Size | 453 MB |
| File Type | Scatter-based ZIP package |
| Flashing Tool | SP Flash Tool (MediaTek) |
⚠️ Warning: Make sure you download the correct firmware that matches your device model and chipset. Flashing an incompatible ROM can result in a bricked phone, display issues, or loss of IMEI. Always back up your data before flashing.
Download Official Firmware for Bluboo Cielo
Below is the official firmware file for the Bluboo Cielo smartphone. This firmware has been extracted and verified for safe flashing through the SP Flash Tool.
📄 Filename: Bluboo_Cielo_MT6572_V0.6_170915_7.0.zip
📦 Size: 453MB
🗓️ Build Date: 15 September 2017
🔢 Build Version: V0.6_170915
🤖 Android Version: 7.0 Nougat
⬇️ Download Link: Download from Mediafire
How to Flash the Firmware
Follow these five basic steps to flash the firmware to your Bluboo Cielo smartphone. This process requires a PC and a USB data cable. The flashing tool recommended for this device is the SP Flash Tool for MediaTek devices.
- Download and extract the firmware file on your computer.
- Install the required MediaTek USB VCOM drivers.
- Launch the SP Flash Tool and load the scatter file from the extracted firmware folder.
- Connect your powered-off device to the PC using a USB cable and click on the “Download” button.
- Wait for the process to complete. A green checkmark will confirm successful flashing.
For the complete step-by-step flashing tutorial with pictures, follow the guide below:
Disclaimer: Flashing firmware is a technical process meant for advanced users. We are not responsible for any damage or malfunction that may occur during or after the flashing process. Proceed at your own risk. If you encounter any issue during flashing, feel free to drop a comment on this page for guidance.