Crucial Warning: Make sure your device model reads S750P on the back sticker under the battery. Never flash this package onto other BLU models with different processors.
Download Firmware for BLU Studio Pro
S750P (Global / Generic) Recommended package for resolving persistent boot loops, unbricking software-damaged phones, and restoring clean factory partitions.
Not sure this is the right one for you? The full list below covers every build.
Compatibility & Bootloader Notes
Flashing stock firmware via SP Flash Tool does not require unlocking the bootloader. Both packages flash with Download Only mode.
Preparation checklist for BLU Studio Pro
- Check model S750P under the battery compartment.
- Install MediaTek USB VCOM drivers on your PC.
- Charge the battery to at least 40% before flashing.
- Use a reliable microUSB cable.
- Back up any accessible personal data before starting.
Flashing Instructions
Step-by-step flashing instructions for BLU Studio Pro are on FlashGuideHub's SP Flash Tool guide.
Frequently Asked Questions
If your BLU Studio Pro S750P is stuck on the boot logo, restarting repeatedly, or completely unbootable, choose the V7.0.04.00 REPAIR package. If you just want to revert root changes or restore standard factory software on a working phone, the V7.0.03.03 GENERIC build is suitable.
Yes. Since both packages share the same Android 7.0 base and MediaTek MT6580 partition structure, you can flash V7.0.03.03 over V7.0.04.00 using SP Flash Tool in Download Only mode.
As long as you leave the mode set to "Download Only" in SP Flash Tool and avoid "Format All + Download", your NVRAM partition will remain untouched, keeping your IMEI numbers safe.