The Advan S7C (model S716) is a 7-inch, 3G-enabled tablet from 2017. It is powered by a Spreadtrum SC7731C processor and runs on Android 6.0 Marshmallow. This tablet was released in two main software versions: a standard retail version and a special “BSE” version, which stands for “Buku Sekolah Elektronik” (Electronic School Book), an educational initiative in Indonesia.
This guide provides the official stock firmware for both the standard and BSE variants. This firmware, in the .pac format, is flashed using the SPD (Spreadtrum) Upgrade Tool and is the best solution for fixing a bricked or dead tablet (mati total), resolving a bootloop, or converting your device from one software version to another.
⚠️ Data Deletion Warning
The flashing process will completely erase all data from your tablet’s internal storage, including:
- Contacts and call logs
- Messages and chat history
- Photos, videos, and files
- Installed apps and settings
Please back up your data before proceeding. This action is irreversible and your information cannot be recovered once erased.
Quick Device Specs
- Device: Advan S7C (S716)
- Release year: 2017
- Chipset: Spreadtrum SC7731C
- Display: 7.0″ TN, 600 x 1024 pixels
- RAM/Storage: 1GB/8GB
- Battery: 2500 mAh
- Original OS: Android 6.0 (Marshmallow)
Required Downloads
To flash this firmware, you will need the SPD Upgrade Tool and the correct Spreadtrum SCI USB drivers for your Windows PC. You can find up-to-date and secure download links for these utilities in our main guide, which is linked in the how-to section below.
- A firmware package from the table below
- SPD Upgrade Tool
- Spreadtrum SCI USB Drivers
Official Stock Firmware (ROM)
Choose the firmware variant you wish to install on your tablet. You can flash the standard version over the BSE version to remove the educational content, and vice-versa.
| Software Variant | Build Date | Type | Download |
|---|---|---|---|
| BSE (Educational) | 2017-06-09 | Stock ROM (.pac File) | Download |
| Standard Retail | 2017-05-25 | Stock ROM (.pac File) | Download |
How to Flash Stock Firmware
To restore your Advan S7C’s software, you will use the SPD Upgrade Tool on a PC. First, ensure you have correctly installed the Spreadtrum SCI drivers. Launch the tool, click the “Load Packet” (gear) icon, and select the .pac firmware file. Click the “Start Downloading” (play) icon. Power off your tablet completely. Press and hold the Volume Down button while connecting the tablet to the computer to begin the flashing process.
For a complete, step-by-step walkthrough, please refer to our detailed pillar guide: How to Flash Firmware with SPD Upgrade Tool.
Device-Specific Troubleshooting for Advan S7C
- Standard vs. BSE Firmware: The main difference is the pre-installed applications. The “BSE” version comes loaded with Indonesian electronic school books and educational apps. The “Standard Retail” version is a clean build without this specific content. You can flash either version on your S7C tablet depending on your preference.
- Tool is Stuck on “Checking Baudrate”: This is the most common error when flashing Spreadtrum devices and indicates a driver issue. Uninstall and reinstall the Spreadtrum drivers, use a different USB port (a main one on the back of your PC is best), and try a different USB cable.
- Restoring Performance: With 1GB of RAM, this tablet can become slow over time. A full firmware flash is the best way to restore its original performance by clearing all software junk and providing a clean, factory-fresh installation of Android.
- Entering Flash Mode: To start the process, the tablet must be off. Press and hold the Volume Down key, and while holding it, connect the USB cable. If that doesn’t work, try the same procedure with the Volume Up button.
FAQs
- Q1. What is the Advan “BSE” firmware?
- BSE stands for “Buku Sekolah Elektronik” (Electronic School Book). It is a special software version created for an educational program in Indonesia, so it comes with pre-loaded educational content. You can replace it with the standard firmware if you wish.
- Q2. My Advan S7C is dead (mati total). Will this firmware fix it?
- Yes. If the cause is corrupted software (a “brick”), this full firmware package and the SPD Upgrade Tool are the standard procedure for reviving the device.
- Q3. The flash tool doesn’t detect my tablet. What’s wrong?
- This is a driver issue 99% of the time. Ensure the Spreadtrum SCI drivers are installed correctly. Open the Windows Device Manager before connecting your tablet; when you connect it while holding Volume Down, a “Spreadtrum” or “SCI” device should appear briefly.
- Q4. Will this process remove the Google Account (FRP) lock?
- No. Flashing the stock firmware will restore the original operating system, but it does not bypass Factory Reset Protection (FRP). You will still need to enter the credentials of the last Google account that was synced to the device.
