The Advan S4T (model WG4036) is a compact 4-inch, entry-level 3G smartphone from 2016. Designed for basic communication, it is powered by a Spreadtrum SC7731 processor and runs on Android 5.1 Lollipop. This guide provides the official stock firmware package to restore your device to its original factory software.
This is a complete firmware package in the .pac format, designed to be flashed using the SPD (Spreadtrum) Upgrade Tool. It is the most effective solution for fixing critical software issues such as a completely dead phone (mati total), a device stuck on the Advan boot logo, or removing stubborn malware that persists after a factory reset.
⚠️ Critical Warning: Data Erasure
Flashing this firmware is a complete reinstallation of the operating system. This process will permanently erase all of your personal information from the phone, including:
- Photos, Videos, and Music
- Contacts and Call History
- SMS and App Messages
- All Installed Applications
Please back up your important files before proceeding. This action cannot be undone.
Quick Device Specs
- Device: Advan S4T (WG4036)
- Release year: 2016
- Chipset: Spreadtrum SC7731
- Display: 4.0″ TN, 480 x 800 pixels
- RAM/Storage: 512MB/4GB
- Battery: 1300 mAh
- Original OS: Android 5.1 (Lollipop)
Required Downloads
To flash this .pac firmware file, you will need the SPD Upgrade Tool and the official Spreadtrum SCI USB drivers. You can find secure download links for both of these essential tools in our main guide, which is linked in the how-to section below.
- The firmware package from the table below
- SPD Upgrade Tool
- Spreadtrum SCI USB Drivers
Official Stock Firmware (ROM)
| Build Version | Android Version | Type | Download |
|---|---|---|---|
| V0.5_20160406 | 5.1 Lollipop | Stock ROM (.pac File) | Download |
How to Flash Stock Firmware
To restore your Advan S4T, you will use the SPD Upgrade Tool on a Windows PC. First, ensure you have correctly installed the Spreadtrum SCI USB drivers. Launch the tool, click the single gear icon (“Load Packet”), and select the .pac firmware file. Click the play icon (“Start Downloading”). Power off your phone completely. Finally, press and hold the Volume Down button while connecting the phone to your computer with a USB cable to initiate the flashing process.
For a complete, step-by-step walkthrough, driver downloads, and troubleshooting, please refer to our detailed pillar guide: How to Flash Firmware with SPD Upgrade Tool.
Device-Specific Troubleshooting for Advan S4T
- Tool is Stuck on “Checking Baudrate”: This is the most common error when flashing Spreadtrum devices and it indicates a driver issue. Uninstall and reinstall the Spreadtrum drivers, use a different USB port (a main one on the back of your PC is best), and try a different USB cable.
- Virus and Malware Removal: With its older software, the S4T is very susceptible to malware. If your phone has become slow, shows ads, or installs apps by itself, a full firmware flash is the only guaranteed way to completely remove the infection.
- Managing Extremely Low Storage: The Advan S4T has only 512MB of RAM and 4GB of internal storage, which is extremely limited. A clean flash will maximize the available space. After flashing, avoid installing any non-essential apps and use a microSD card for all photos and media.
- Entering Flash Mode: To start the process, you must hold a boot key. For the Advan S4T, this is typically Volume Down. If that doesn’t work, try holding Volume Up while connecting the powered-off phone.
FAQs
- Q1. My Advan S4T is completely dead (mati total). Will this firmware fix it?
- Yes. If the cause of the dead device is corrupted software (a “hard brick”), then flashing this official
.pacfirmware is the standard procedure to unbrick it and restore it to working condition. - Q2. What is a
.pacfile? - A
.pacfile is an all-in-one firmware package for devices with Spreadtrum (now UNISOC) chipsets. It bundles all system partitions (boot, recovery, system, etc.) into a single file for easy flashing. - Q3. The flash tool doesn’t detect my phone. What’s wrong?
- This is a driver issue 99% of the time. Ensure the Spreadtrum SCI drivers are installed correctly. Open the Windows Device Manager before connecting your phone; when you connect it while holding Volume Down, a “Spreadtrum” or “SCI” device should appear briefly.
- Q4. Will this process remove the Google Account (FRP) lock?
- No. Flashing the stock firmware will restore the original operating system, but it does not bypass Factory Reset Protection (FRP). You will still need to enter the credentials of the last Google account that was synced to the device.
