Redmi K60 and POCO F5 Pro (codename: mondrian) share a Snapdragon 8+ Gen 1 platform, 6.67‑inch 1440×3200 120Hz AMOLED display, and 5500mAh battery, positioned as high‑end gaming and multimedia devices where firmware tuning strongly affects heat, battery and frame pacing.
HyperOS 2.x updates on the wider POCO F5 / F5 Pro family have triggered user reports of overheating during light use, frequent game crashes, and worsened battery endurance compared to earlier MIUI builds, sometimes persisting even after a factory reset.
The official HyperOS 2.0 Android 15 fastboot ROMs below, together with the Xiaomi.eu ROM and TWRP/OrangeFox recovery for mondrian, offer a clean system base to repair broken OTAs, reverse long‑term dirty‑update slowdowns, and test whether current overheating or instability on Redmi K60 / POCO F5 Pro is caused by firmware corruption or by the specific HyperOS build itself.
Redmi K60 / POCO F5 Pro (mondrian) Firmware Details
| Device Names | Redmi K60 (China) / POCO F5 Pro (global markets). |
|---|---|
| Codename | mondrian (used across kernel source, LineageOS and HyperOS firmware trackers). |
| Chipset / GPU | Qualcomm Snapdragon 8+ Gen 1 (SM8475) with Adreno 730 GPU. |
| Display | 6.67″ 3200×1440 AMOLED, 120Hz refresh, used heavily for high‑FPS gaming and HDR streaming. |
| Battery & Charging | Non‑removable ~5500mAh battery with fast charging; user groups report HyperOS 2.x updates increasing drain and heat on similar Xiaomi flagships. |
| ROM Types Listed | Official HyperOS 2.0 fastboot ROMs (.tgz), Xiaomi.eu HyperOS 2.0 ROM (.zip), OrangeFox recovery (.zip) and TWRP recovery (.img) for mondrian. |
| Android / HyperOS Version | HyperOS 2.0.2x / 2.2.x based on Android 15 for mondrian, plus earlier HyperOS 2.0.x fastboot branches by region. |
| Bootloader Requirement | Bootloader unlock is required for fastboot and custom ROM flashing on Redmi K60 / POCO F5 Pro. |
| Key Issues These ROMs Help Target | Game crashes after HyperOS update, severe overheating during moderate use, abnormal battery drain after OTA, inconsistent performance between builds. |
⚠️ Flashing Risks & Disclaimer
- Flashing firmware on Redmi K60 / POCO F5 Pro (mondrian) is high risk because the same hardware appears under both Redmi and POCO branding with multiple regional branches (CNXM, MIXM, EUXM, RUXM, TWXM, TRXM), and cross‑flashing can break 5G bands, VoLTE profiles or POCO‑specific features.
- Reports from HyperOS 2.x users describe overheating, crashing games and performance drops even after factory resets, which tempts repeated flashing; each attempt carries a fresh risk of bootloops or partition corruption on this A/B flagship.
- Large HyperOS 2.0 fastboot packages (7–8GB) stress USB connections; an accidental disconnect or wrong flashing script can leave mondrian stuck in fastboot or unable to boot system.
- Custom ROMs like Xiaomi.eu and custom recoveries change the update path and may complicate future official HyperOS OTA behavior, especially when switching back and forth between China and Global branches.
- All downloads and procedures are provided as is; users must verify codename = mondrian, select the correct regional code (e.g., VMNMIXM, VMNEUXM, VMNRUXM), back up data, and accept full responsibility for any damage or loss.
Download Official Firmware for Redmi K60 / POCO F5 Pro (mondrian)
These HyperOS 2.0 fastboot packages match official mondrian firmware entries for Redmi K60 (China) and POCO F5 Pro (Global/EEA/Russia/Taiwan/Turkey).
| Filename | Region / Branch | Android | Type | Build Date | File Size | Download |
|---|---|---|---|---|---|---|
| mondrian_images_OS2.0.220.0.VMNCNXM_20251105.0000.00_15.0_cn_ee47654f1f.tgz | China (VMNCNXM) / HyperOS 2.2.0.220.0 for Redmi K60 China, marked as HyperOS 2.2 in update trackers. | 15.0 | Fastboot ROM (.tgz) | 2025‑11‑05 | 7.55GB | Download OS2.0.220.0 VMNCNXM (Xiaomi Server) |
| mondrian_global_images_OS2.0.208.0.VMNMIXM_20251105.0000.00_15.0_global_120b1c6e38.tgz | Global (VMNMIXM) / HyperOS 2.0.208.0 for POCO F5 Pro Global. | 15.0 | Fastboot ROM (.tgz) | 2025‑11‑05 | 7.24GB | Download OS2.0.208.0 VMNMIXM (Xiaomi Server) |
| mondrian_ru_global_images_OS2.0.204.0.VMNRUXM_20251111.0000.00_15.0_ru_d942ada55f.tgz | Russia (VMNRUXM) / HyperOS 2.0.204.0 for POCO F5 Pro Russia. | 15.0 | Fastboot ROM (.tgz) | 2025‑11‑11 | 7.38GB | Download OS2.0.204.0 VMNRUXM (Xiaomi Server) |
| mondrian_eea_global_images_OS2.0.206.0.VMNEUXM_20251111.0000.00_15.0_eea_9e47d0ded4.tgz | EEA (VMNEUXM) / HyperOS 2.0.206.0 for POCO F5 Pro EEA. | 15.0 | Fastboot ROM (.tgz) | 2025‑11‑11 | 6.93GB | Download OS2.0.206.0 VMNEUXM (Xiaomi Server) |
| mondrian_tw_global_images_OS2.0.203.0.VMNTWXM_20251111.0000.00_15.0_tw_683c2c377c.tgz | Taiwan (VMNTWXM) / HyperOS 2.0.203.0 for POCO F5 Pro Taiwan. | 15.0 | Fastboot ROM (.tgz) | 2025‑11‑11 | 6.40GB | Download OS2.0.203.0 VMNTWXM (Xiaomi Server) |
| mondrian_tr_global_images_OS2.0.203.0.VMNTRXM_20251111.0000.00_15.0_tr_e9b6c1dd2a.tgz | Turkey (VMNTRXM) / HyperOS 2.0.203.0 for POCO F5 Pro Turkey. | 15.0 | Fastboot ROM (.tgz) | 2025‑11‑11 | 6.56GB | Download OS2.0.203.0 VMNTRXM (Xiaomi Server) |
Optional: Xiaomi.eu ROM & Custom Recovery for mondrian
Xiaomi.eu and custom recoveries give advanced mondrian users finer control over updates, but they also add complexity when debugging heat and crash issues introduced by specific HyperOS 2.x builds.
| File | Purpose | Size | Download |
|---|---|---|---|
| xiaomi.eu_MONDRIAN_OS2.0.224.0.VMNCNXM_15.zip | Xiaomi.eu HyperOS 2.0 custom ROM for Redmi K60 / POCO F5 Pro (mondrian), built on China VMNCNXM Android 15 base. | 5.39GB | Download Xiaomi.eu MONDRIAN OS2.0.224.0 (SourceForge) |
| OrangeFox-R11.3_1-mondrian.zip | OrangeFox custom recovery package for mondrian, used to install ROMs, kernels and manage backups via recovery. | 55MB | Download OrangeFox for mondrian (SourceForge) |
| twrp-3.7.1_12-v9.0_A15-mondrian-skkk.img | TWRP recovery image for mondrian, useful for advanced operations like NANDroid backups and module removal after failed tweaks. | 100MB | Download TWRP for mondrian (SourceForge) |
Flashing Requirements
- Windows PC or laptop, stable USB‑C cable, and a direct USB port (avoid hubs) to safely handle 7–8GB fastboot images for Redmi K60 / POCO F5 Pro.
- Unlocked bootloader; mondrian is treated like other modern Xiaomi flagships where fastboot flashing of official and Xiaomi.eu ROMs assumes an unlocked state.
- Correct regional HyperOS ROM (VMNCNXM for China Redmi K60, VMNMIXM for Global POCO F5 Pro, VMNEUXM for EEA, VMNRUXM for Russia, VMNTWXM for Taiwan, VMNTRXM for Turkey).
- Fastboot mode access (Power + Volume Down) and, for custom ROM users, recovery access via TWRP/OrangeFox to perform wipes, backups and emergency module removal when HyperOS will not boot.
- Full backups (local + cloud) because clean flashes are often the only reliable software fix when HyperOS 2.0 updates cause persistent overheating or gaming crashes even after standard resets.
How to Flash the Firmware
Method A: Official HyperOS Fastboot ROM (.tgz) via Mi Flash Tool
- Step 1: Download and extract the correct fastboot ROM (for example mondrian_global_images_OS2.0.208.0.VMNMIXM_20251105…) to a short folder path such as
C:\mondrian_VMNMIXM\to avoid path‑length errors. - Step 2: Boot Redmi K60 / POCO F5 Pro into Fastboot (Power + Volume Down) and connect to a PC using a high‑quality cable to prevent drop‑outs with these large Android 15 images.
- Step 3: Open Xiaomi Mi Flash Tool, click “Select” to choose the extracted ROM folder, then “Refresh” to ensure mondrian appears in the device list with a valid fastboot ID.
- Step 4: For severe overheating and game crashes that started after a specific HyperOS update (like 2.0.4.0 on POCO F5), perform a full “clean all” flash instead of a dirty upgrade to reset thermal profiles and app data completely.
- Step 5: Start flashing and wait for the success status; the first boot into HyperOS 2.0.220.0 / 2.0.208.0 can take several minutes as Android 15 optimizes apps on mondrian’s fast UFS storage.
For screenshots and a visual Xiaomi Mi Flash walkthrough, see: How to flash a Xiaomi phone with Mi Flash Tool.
Method B: Xiaomi.eu HyperOS 2 (.zip) + TWRP / OrangeFox (Advanced)
- Step 1: Confirm that the bootloader is unlocked and a full backup exists; moving to xiaomi.eu_MONDRIAN_OS2.0.224.0.VMNCNXM_15.zip from stock HyperOS usually requires wipes to avoid leftover MIUI/HyperOS conflicts.
- Step 2: Download the Xiaomi.eu ROM and either OrangeFox-R11.3_1-mondrian.zip or twrp-3.7.1_12-v9.0_A15-mondrian-skkk.img, then copy the ROM.zip to internal storage or prepare for ADB sideload.
- Step 3: Use Fastboot to boot/flash the recovery image for mondrian, then perform the required wipes; this is especially important when trying to eliminate game crash and heating issues that started with earlier HyperOS builds.
- Step 4: From OrangeFox or TWRP, flash xiaomi.eu_MONDRIAN_OS2.0.224.0.VMNCNXM_15.zip, verifying that the codename and HyperOS version shown match mondrian and Android 15.
- Step 5: Reboot and allow Xiaomi.eu HyperOS to optimize apps; keep an official fastboot ROM like mondrian_images_OS2.0.220.0.VMNCNXM… or the matching regional build on PC in case recovery via Mi Flash becomes necessary.
For fastboot script‑based installs (e.g., using a flash_all.bat file), refer to: How to flash stock firmware using a fastboot script.
Frequently Asked Questions (FAQs)
Which devices use the codename “mondrian”?
The codename “mondrian” is used for Redmi K60 in China and POCO F5 Pro in global markets, and appears consistently in kernel source, custom ROM and HyperOS firmware sites.
Why did POCO F5 / F5 Pro start overheating and crashing games after HyperOS?
POCO F5 users report severe overheating and frequent game crashes after updating to HyperOS 2.0.4.0 Global, even in lightweight games and regardless of resets, indicating a firmware‑level problem on some units.
A clean flash of a newer HyperOS 2.0.20x/2.2.20.0 version for mondrian helps distinguish between a corrupted update and a persistent bug in a particular build branch.
Does HyperOS 2.0 generally drain more battery than MIUI on mondrian?
User communities for Redmi K60 and similar Xiaomi flagships report noticeably higher HyperOS battery drain and heat compared to MIUI, prompting advice to stay updated and avoid heavy background apps.
On mondrian, using the latest stable HyperOS 2.0 build for the exact region and performing a clean installation is recommended before assuming a hardware battery fault.
Is it safe to use a China ROM (VMNCNXM) on a Global POCO F5 Pro?
HyperOS firmware tables clearly separate Redmi K60 China (VMNCNXM) from POCO F5 Pro Global/EEA/Russia/Turkey/Taiwan builds, indicating different branches.
Flashing a China ROM on a Global device can affect modem bands, payments and OTA behavior, so it is best avoided unless fully aware of the implications and equipped with a recovery plan.
Can custom recovery help fix a bootloop caused by a bad Magisk module on mondrian?
OrangeFox and TWRP packages for mondrian allow advanced operations such as deleting Magisk modules, restoring full backups and flashing alternative ROMs when HyperOS will not boot.
