The HomTom HTS8 (also marketed as HomTom S8) is a 5.7‑inch Android smartphone on the MediaTek MT6750T octa‑core platform, featuring Android 7.0 Nougat, 4 GB RAM, and 64 GB storage.
On this mid‑range device, software glitches often arise from interrupted OTA updates, region‑specific app incompatibilities, or power loss during rooting attempts leading to boot failures or sluggish performance.
Installing the preserved R10 stock firmware package below can assist in restoring factory software integrity, unbricking, or stabilizing after modifications, if hardware is functional.
This package is an original stock ROM mirrored for preservation, as the manufacturer no longer provides public downloads for this model.
HomTom HTS8 Firmware Details
| Device Name | HomTom HTS8 / S8 |
|---|---|
| Model Identifier | HTS8 (4 GB RAM, 64 GB storage) |
| Codename | HTS8 (MT6750T internal reference) |
| Chipset / Platform | MediaTek MT6750T, octa‑core (4×1.5 GHz Cortex‑A53 + 4×1.0 GHz Cortex‑A53), Mali‑T860 MP2 GPU |
| Launch Android Version | Android 7.0 Nougat with HomTom UI |
| Current Firmware Line | Official Android 7.0 R10/R11 stock ROM line (2017 builds). |
| Typical File Size Range | 1.0–1.5 GB per scatter ROM; this R10 package is approximately 1.24 GB (ZIP). |
| Firmware Type | Scatter‑based stock ROM for SP Flash Tool (full partition images). |
| Flashing Tool | SmartPhone Flash Tool (SP Flash Tool) for MT6750T. |
| Bootloader Requirement | Preloader flashing with locked bootloader; fastboot unlock not required for stock restore. |
| Region / Branch Notes | Global LTE variant; no major regional splits documented. |
⚠️ Flashing Risks & Disclaimer
Flashing the HTS8 rewrites MT6750T partitions like preloader, boot, system, and modemst1/st2, which handle USB detection, boot chain, and LTE calibration. Mismatched preloader or lk loaders can render the device undetectable over USB, necessitating test‑point access for recovery, while NVRAM formatting risks IMEI loss on this octa‑core board. SP Flash Tool errors from storage exhaustion or interrupted transfers can exacerbate low‑memory issues common on 64 GB setups.
Firmware provided solely for legitimate device maintenance. No copyright ownership claimed; all original files belong to their creators.
Download Official Firmware for HomTom HTS8
| Region / Variant | Filename | Build / Version | Android / Firmware Version | File Type | Build Date | File Size | Download Link |
|---|---|---|---|---|---|---|---|
| Global MT6750T | Homtom_HTS8_MT6750_R10_20171012_7.0.zip | Android_7.0‑R10 (stock line) | Android 7.0 Nougat | Scatter stock ROM (SP Flash Tool) | 12 October 2017 (R10) | ~1.24 GB (ZIP) | Download R10 build (MediaFire mirror) |
This package is an original stock ROM mirrored for preservation, as the manufacturer no longer provides public downloads for this model.
Flashing Requirements
- PC and OS: Windows 7/8/10/11 PC with admin privileges, USB 2.0/3.0 port, reliable micro‑USB cable.
- Drivers: MediaTek VCOM/Preloader drivers for MT6750T detection in Download mode.
- Flashing tool: SP Flash Tool supporting MT6750 scatter ROMs.
- Bootloader / security: Locked bootloader OK; uses preloader USB protocol.
- Data backup: Userdata partition wipe erases apps/data; back up if possible.
- Device verification: Confirm HTS8/S8, MT6750T, 4/64 GB via settings; not for other MT6750 models.
- Battery charge: 50%+ on 3400 mAh battery to prevent mid‑flash failure.
How to Flash the Firmware
- Download and extract “Homtom_HTS8_MT6750_R10_20171012_7.0.zip”, verify MT6750 scatter and images present.
- Setup tools/drivers: Install MediaTek VCOM drivers and launch SP Flash Tool for MT6750T.
- Load scatter: In “Download” tab, select scatter file, confirm partitions (boot, system, etc.).
- Flash via preloader: Power off HTS8, hit “Download” (“Download Only”), connect USB for detection/start.
- Finish and boot: Green success → disconnect/power on; initial Nougat boot longer for optimization.
Detailed MediaTek guide: How to flash MediaTek firmware with SP Flash Tool .
Frequently Asked Questions (FAQs)
Does this R10 ROM match all HTS8 hardware variants?
Targets standard HomTom HTS8/S8 with MT6750T, 4 GB RAM/64 GB storage global LTE config. Avoid for regional or carrier mods with different modems.
Can it fix bootloop after OTA failure?
Yes, replaces corrupted boot/system partitions from interrupted OTAs with factory R10 images. Hardware storage issues persist.
Is preloader flashing safe for HTS8?
Only if matching this exact model; wrong preloader bricks USB detection on MT6750T—prefer “Download Only” without it for basic fixes.
Does flashing wipe the 128 GB microSD support?
No, targets internal eMMC only; hybrid SIM/SD slot unaffected. Userdata clears internal data.
Will it restore IMEI/LTE after NVRAM wipe?
Modemst partitions included, but IMEI needs SN Write post‑flash if NVRAM cleared.
Compatible with S8 name variants?
Yes, HTS8 and S8 are the same MT6750T device; use this for unbrick/restore.
