The Homtom HT5 is a compact 5‑inch Android smartphone built on the MediaTek MT6735/MT6735M 64‑bit quad‑core platform and launched with Android 5.1 Lollipop out of the box. The phone’s modest 1 GB RAM and 16 GB storage, combined with frequent use as a rugged daily or backup device, make it particularly prone to software problems after failed OTAs, interrupted app updates, or experimental rooting.
Restoring the stock firmware listed below can help recover from bootloops, soft‑bricks, and severe performance issues by reinstalling a clean system image, without guaranteeing that every fault or hardware problem will be resolved.
Homtom HT5 Firmware Details
| Device Name | Homtom HT5 |
|---|---|
| Model Identifier | HT5 (MT6735/MT6735M platform) |
| Codename | Not publicly documented; MT6735M-based Homtom HT5 |
| Chipset / Platform | MediaTek MT6735M, 64‑bit quad‑core Cortex‑A53, integrated LTE modem |
| Launch Android Version | Android 5.1 Lollipop |
| Current Firmware Line | Stock Android 5.1 Lollipop ROM (V03 series) |
| Typical File Size Range | Approximately 550–600 MB per full SP Flash scatter package |
| Firmware Type | Full stock ROM, scatter-based SP Flash Tool package (.zip containing system, boot, recovery, etc.) |
| Flashing Tool | SP Flash Tool (Smartphone Flash Tool) for MediaTek devices |
| Bootloader Requirement | Standard MTK preloader mode; no user-facing bootloader unlock required for stock flashing |
| Region / Branch Notes | Single global firmware branch known; vendor no longer serves public downloads directly |
The Homtom HT5 firmware package below is suitable only for this model and platform; using it on other MT6735 or Homtom variants (such as HT6 or HT7) can cause serious compatibility issues.
⚠️ Flashing Risks & Disclaimer
Flashing this model carries typical MediaTek‑specific risks due to its MT6735M preloader and tightly coupled DRAM and display drivers. A wrong scatter package or preloader image can prevent the device from entering normal preloader mode, making USB detection difficult and recovery more complex than a standard soft‑brick. Because this phone uses a single 16 GB internal storage configuration, repeated failed flashes or mixing images from different MT67xx devices can also corrupt the partition layout, affecting userdata, NVRAM, and modem calibration.
Firmware packages linked on this page are original stock ROMs mirrored for preservation, as the manufacturer no longer provides public downloads for this model. Distribution is intended for legitimate repair and restoration of devices already owned by users, and does not grant any rights to redistribute proprietary binaries further. Flashing operations are performed entirely at the user’s risk, and no outcome—including data recovery, unbricking, or performance improvement—can be guaranteed.
Download Official Firmware for Homtom HT5
This package is an original stock ROM mirrored for preservation, as the manufacturer no longer provides public downloads for this model.
| Region / Variant | Filename | Build / Version | Android Version | File Type | Build Date | File Size | Download Link |
|---|---|---|---|---|---|---|---|
| Global (Single SIM / Dual SIM HT5) | Homtom_HT5_MT6735M_20160105_V03_5.1.zip | V03 | Android 5.1 Lollipop | SP Flash Tool scatter package (.zip) | 2016-01-05 | ≈ 562 MB | Download Global build (MediaFire mirror) |
For reference, the same filename and size are listed by independent firmware indexes as the official Homtom HT5 V03 stock ROM for MT6735M.
Flashing Requirements
- PC & OS: Windows PC (7/8/10/11) with administrative rights to install USB drivers.
- Drivers: MediaTek VCOM or CDC USB drivers compatible with MT6735M devices to allow preloader‑mode detection.
- Tool: SP Flash Tool (Smartphone Flash Tool) matching this MT67xx platform; avoid very old or experimental beta builds when possible.
- Bootloader / Mode: The phone must be able to enter preloader mode (power off, then connect USB) but does not require a user‑unlocked bootloader for stock flashing.
- Backup: A full backup of personal data is strongly recommended, because a typical “Download Only” or “Firmware Upgrade” operation on this device can wipe system, cache, and userdata partitions.
- Model Verification: Confirm that the printed label and software identify the phone as “Homtom HT5” and that the firmware name includes “MT6735M” before flashing; do not use this package on HT6, HT7, or other MT6735 series phones.
- Power: Ensure at least 60–80% battery charge to reduce the risk of shutdown during flashing, especially on older batteries that may sag under load.
How to Flash the Firmware
- Download and extract the package. Obtain the Homtom HT5 stock ROM ZIP from the download table above, then extract it on the PC to reveal the SP Flash Tool scatter file (for example, an MT6735M_Android_scatter.txt) and partition images.
- Prepare SP Flash Tool and drivers. Install the MediaTek VCOM/CDC drivers, download a recent SP Flash Tool release, and launch it with administrator privileges, ensuring that no other phone tools are competing for the MTK USB port.
- Load the scatter file. In SP Flash Tool, open the “Download” tab, click “Choose” next to Scatter‑loading File, and select the MT6735M scatter from the extracted HT5 firmware folder; confirm that the partition list populates correctly without errors.
- Connect the powered‑off device and start flashing. With the phone completely switched off, click “Download” in SP Flash Tool, then connect the HT5 to the PC via USB; the preloader should enumerate, and the tool will begin writing the selected partitions.
- Wait for completion and first boot. After the green success checkmark appears, disconnect the cable, power on the device, and allow extra time for the first boot on Android 5.1 as Dalvik/ART optimizes apps on this MT6735M platform.
For a more detailed walkthrough of SP Flash Tool usage on MediaTek devices, including screenshots and troubleshooting tips, see the external guide. This guide explains the scatter loading process, connection modes, and typical error codes for MT67xx devices.
Frequently Asked Questions (FAQs)
Which devices is this firmware compatible with?
The mirrored ROM is intended only for the Homtom HT5 based on the MediaTek MT6735/MT6735M platform and shipped with Android 5.1; it should not be flashed on other Homtom models such as the HT6 or HT7 or on unrelated MT6735 phones.
Does this ROM support both single and dual SIM variants?
The HT5 platform uses a dual‑SIM capable MT6735M modem, and the known V03 stock firmware is treated as a global configuration; SIM functionality is handled within the modem and NVRAM configuration, so mixing NVRAM from other devices should be avoided to prevent network issues.
Can this firmware fix a bootloop after a failed app or OTA update?
A clean reflash of the stock system and boot partitions using this package can help resolve bootloops caused by corrupted system files, failed OTAs, or incompatible modifications, as long as the underlying eMMC and other hardware are intact.
Will flashing this ROM erase my data?
Most SP Flash Tool operations that rewrite the system and related partitions on the Homtom HT5 will also wipe user data, so internal storage should be backed up beforehand wherever possible.
Is cross‑flashing between different HT5 firmware versions safe?
Moving between nearby stock versions for the same MT6735M HT5 hardware (for example, earlier V0x revisions) is generally feasible, but using firmware from other models or chip variants can introduce DRAM and display driver mismatches that prevent the phone from booting or showing an image.
Does flashing this stock ROM affect warranty or service?
The HT5 is an older device whose official warranty period has typically expired; however, reflashing a clean stock build may help restore the software state expected by many independent repair centers, without guaranteeing any specific service policy outcome.
Why is the firmware hosted on MediaFire instead of the manufacturer’s site?
Homtom no longer maintains public download links for this device, so third‑party archives and firmware indexes mirror the original stock packages to keep them available for repair and restoration purposes.
What SP Flash Tool errors are common with this device?
On this MT6735M phone, users most often encounter BROM errors related to drivers or cable issues and “PMT changed” messages when the partition table differs from the loaded scatter, which can usually be addressed by using the correct HT5 V03 scatter file and reinstalling MediaTek drivers.
