The Homtom HT7 Pro (MT6735M) is a mid‑tier budget smartphone released in 2016, featuring a MediaTek MT6735P chipset, 2GB RAM, 16GB storage, and a 5.5‑inch HD IPS display running Android 5.1 Lollipop. With 2GB of RAM and the limited storage typical of the mid‑2010s era, this phone often encountered slowdowns and bootloops after accumulating apps, failed incremental updates, or aborted root attempts.
Restoring the original stock ROM can help recover the device from soft‑bricks, restore system stability, and return the phone to a consistent factory state without modifying the hardware or radio calibration.
This page provides a preserved stock firmware package for the Homtom HT7 Pro MT6735M, designed for use with scatter‑based MediaTek utilities such as SP Flash Tool on Android 5.1 devices. The package mirrors the original factory build and is intended for users who need an unmodified reference image for recovery or clean installation.
Homtom HT7 Pro Firmware Details
| Device Name | Homtom HT7 Pro |
| Model Identifier | HT7 Pro (Homtom_HT7_Pro) |
| Codename | HT7_Pro_MT6735M (MediaTek variant) |
| Chipset / Platform | MediaTek MT6735P/M, 64‑bit Cortex‑A53 with Mali‑T720 MP2 GPU |
| Launch Android Version | Android 5.1 Lollipop (factory build line) |
| Current Firmware Line | Stock Homtom Android 5.1 builds (pre‑Treble, non‑A/B) |
| Typical File Size Range | 700 MB – 900 MB for full stock ROM archives |
| Firmware Type | Scatter-based stock ROM (SP Flash Tool‑compatible ZIP archive) |
| Flashing Tool | SP Flash Tool (recommended versions 1548 or 1552 for MT6735M) |
| Bootloader Requirement | Typically uses locked OEM bootloader; access via preloader/Meta mode without unlocking |
| Region / Branch Notes | Single global hardware line; package targets standard Homtom HT7 Pro MT6735M variant |
⚠️ Flashing Risks & Disclaimer
Flashing the Homtom HT7 Pro with the incorrect scatter ROM or interrupting the write process can result in a hard brick, loss of IMEI, or non‑booting device that requires specialized tools to recover. Because this model relies on preloader, modem, and NVRAM partitions calibrated to its MT6735P board and Mali‑T720 GPU, cross‑flashing firmware from other Homtom models or forcing “Format All” operations can permanently break cellular connectivity, display touch calibration, or sensor behavior.
This stock ROM is provided strictly for recovery and maintenance of legitimately owned Homtom HT7 Pro devices and remains the intellectual property of its original rights holders. No modifications are made to the firmware, and distribution here is for archival and preservation purposes only, with all trademarks and copyrights belonging to their respective owners.
Download Official Firmware for Homtom HT7 Pro
This package is an original stock ROM mirrored for preservation, as the manufacturer no longer provides public downloads for this model.
| Region / Variant | Filename | Build / Version | Android Version | File Type | Build Date | File Size | Download Link |
|---|---|---|---|---|---|---|---|
| Global (Homtom HT7 Pro MT6735M) | Homtom_HT7_Pro_MT6735M_20161027_5.1.zip | 20161027 stock build line (Android 5.1) | Android 5.1 Lollipop | ZIP archive (scatter-based stock ROM) | 27 October 2016 | 801.3 MB | Download Homtom HT7 Pro stock ROM (MediaFire mirror) |
Flashing Requirements
- PC & OS: A Windows PC (Windows 7 or newer) with administrator privileges to install MediaTek VCOM drivers.
- Flashing Tool: SP Flash Tool version 1548 or 1552 (older versions known to work reliably with MT6735M devices).
- Drivers: MediaTek VCOM or CDC drivers installed so the powered‑off HT7 Pro is detected in preloader/download mode over USB.
- Bootloader & Modes: OEM bootloader can remain locked for stock restoration; preloader handshake is triggered when plugging the powered‑off device into the PC.
- Data & Wipe Behavior: A full “Download + Format” or “Firmware Upgrade” wipe typically erases user data, installed apps, and can affect NVRAM; back up important files and, if possible, NVRAM/IMEI before flashing.
- Device Verification: Check that the device identifies as Homtom HT7 Pro with MT6735M in About Phone and confirm the scatter filename matches the target model.
- Battery Charge: Charge the 3000mAh battery to at least 50% to minimize risk of shutdown during writes.
How to Flash the Firmware
- Download the correct ROM: Obtain the Homtom_HT7_Pro_MT6735M_20161027_5.1 ZIP for the HT7 Pro and extract all contents on the PC to locate the scatter file.
- Prepare SP Flash Tool and drivers: Install MediaTek VCOM drivers, open SP Flash Tool, and load the MT6735M scatter file from the extracted firmware so partitions are listed correctly.
- Select mode and target partitions: Depending on your goal, choose “Download Only” for standard restoration or “Firmware Upgrade” if a clean install is needed; verify only required partitions are ticked.
- Enter download mode and flash: With the HT7 Pro powered off, click “Download” in SP Flash Tool, then connect via USB so the preloader port initializes and the flashing progress begins.
- First boot behavior: After SP Flash Tool reports success, disconnect the device and power it on; the initial boot after flashing this pre‑Treble Android 5.1 firmware commonly takes several minutes as the system rebuilds caches and optimizes apps.
For a detailed guide covering SP Flash Tool usage with scatter‑based MediaTek ROMs, see this reference: How to flash MediaTek firmware with SP Flash Tool.
Frequently Asked Questions (FAQs)
Can this MT6735M firmware be used on any Homtom device?
No. This ROM is specific to the Homtom HT7 Pro with the MT6735P/M chipset and should not be flashed to other Homtom models, as differences in board layout, display driver ICs, and modem calibration will likely cause boot failures or hardware malfunctions.
Will flashing this ROM wipe data on the HT7 Pro?
Using “Firmware Upgrade” or “Download Only” without formatting typically preserves user data, but a “Format All + Download” or flashing mismatched partitions can erase personal content; back up before proceeding.
What software problems can this stock ROM help resolve on this phone?
This firmware can address bootloops after aborted rooting attempts, persistent crashes caused by corrupted system partitions, and OTA update failures that leave the HT7 Pro stuck on boot animations.
Is it safe to flash only system and boot partitions?
On a working HT7 Pro, limiting the operation to system, boot, recovery, and vendor is generally safer than rewriting preloader and NVRAM, which are tightly tied to this model’s hardware calibration.
Can this Android 5.1 firmware be updated OTA afterward?
Since Homtom no longer maintains active update channels for this device, official OTA updates are unlikely, but flashing this stock ROM will return the system to a known factory baseline.
Does flashing this preserved ROM affect warranty?
As the HT7 Pro is an older budget device and formal warranty coverage has likely expired, using this preserved stock firmware should not create additional service complications, but local policies may vary.
What should be checked before flashing on the 2GB RAM variant?
Confirm the model is indeed the HT7 Pro with 2GB RAM and MT6735M, verify the scatter filename matches, and avoid forcing format options targeting NVRAM unless IMEI recovery is explicitly intended.
Why use SP Flash Tool versions 1548 or 1552 for MT6735M?
Older SP Flash Tool versions tend to be more stable with MT6735M devices and DA handling, reducing the risk of “security check” or “BROM” errors that can occur with newer releases on this chipset generation.
