The Homtom T7 is an entry-level Android smartphone built on the MediaTek MT6580 quad-core Cortex-A7 platform and typically ships with Android 5.1 Lollipop. This type of device is often used as a basic daily phone or backup handset, so repeated app installs, low internal storage, or failed OTA updates can easily trigger bootloops, system UI crashes, or soft-bricks over time.
Installing the preserved stock firmware below can help restore a non-booting system, remove unstable modifications, or roll back from corrupt updates, as long as the package matches the exact MT6580-based Homtom T7 hardware.
Homtom T7 Firmware Details
| Device Name | Homtom T7 smartphone (entry-level series) |
| Model Identifier | Homtom T7, MT6580-based variant (Android 5.1) |
| Codename | MT6580 project (scatter-based ROM; device marketed as T7/HT7 family) |
| Chipset / Platform | MediaTek MT6580, quad-core ARM Cortex-A7, Mali-400 GPU |
| Launch Android Version(s) | Android 5.1 Lollipop (32-bit) |
| Current Firmware Line | Android 5.1 Lollipop stock ROM, early 2016 build (20160219) |
| Typical File Size Range | Approximately 400–500 MB for full MT6580 scatter firmware archives |
| Firmware Type | Scatter-based stock ROM (system, boot, recovery, etc.) for SP Flash Tool |
| Flashing Tool | SP Flash Tool (MediaTek download mode flashing) |
| Bootloader Requirement | Standard MTK preloader/download mode; usually no user-facing unlock required for service flashing on this generation |
| Region / Branch notes | Single low-cost global hardware class; ROM is only for the MT6580 Homtom T7/HT7 line and must not be used on other brands or MT6580 devices. |
⚠️ Flashing Risks & Disclaimer
On this MT6580 platform, the preloader, lk, and modem partitions are tightly bound to the specific DRAM timings, display panel, and baseband configuration used by the Homtom T7, so flashing an incompatible scatter or image set can cause permanent boot failure or a black screen.
Writing the wrong modem or nvram content may also break IMEI provisioning or 3G connectivity, which is particularly problematic on an entry-level phone that relies on basic GSM/UMTS networks for daily use.
The firmware file linked below is an original stock ROM mirrored on a third-party host for preservation, as vendor-hosted downloads for this older MT6580 model are no longer publicly available. All firmware components, trademarks, and software belong to their respective copyright holders, and this listing does not imply any modification, rebranding, or endorsement by the hosting site beyond linking to the unaltered package.
Download Official Firmware for Homtom T7
This package is an original stock ROM mirrored for preservation, as the manufacturer no longer provides public downloads for this model.
| Region / Variant | Filename | Build / Version | Android / Firmware Version | File Type | Build Date | File Size | Download Link |
|---|---|---|---|---|---|---|---|
| Global (Homtom T7 MT6580) | Homtom_T7_MT6580_20160219_5.1.zip | MT6580 Android 5.1 stock build (2016-02-19 service release; early production firmware for this line) | Android 5.1 Lollipop | ZIP archive with SP Flash Tool scatter-based firmware (system, boot, recovery, etc.) | 19 February 2016 (20160219) | ≈ 446 MB (download page reports 445–446 MB) | Download Homtom T7 stock ROM (preserved mirror) |
Flashing Requirements
- A Windows PC (Windows 7 or newer) with administrator rights to install MediaTek VCOM / Preloader USB drivers for MT6580.
- SP Flash Tool (v5.x or compatible) installed or extracted, with support for MT6580 scatter files.
- The correct Homtom_T7_MT6580_20160219_5.1 firmware archive fully downloaded and extracted to a folder with the MT6580 scatter and partition images.
- A reliable USB cable and stable USB port to avoid disconnections during preloader download mode on this device.
- Battery level ideally above 40%, since low-cost MT6580 phones can be more sensitive to sudden power loss in the middle of flashing.
- Backup of personal data wherever possible, as “Firmware Upgrade” or “Format + Download” procedures will wipe user apps, settings, and may erase internal storage.
- Verification that the phone is indeed a Homtom T7/HT7 MT6580 class device (Android 5.1, 1 GB RAM, 8 GB or similar storage) and not a different Homtom or generic MT6580 model.
How to Flash the Firmware
- Download the Homtom_T7_MT6580_20160219_5.1.zip file to the PC and extract it, then confirm the presence of the MT6580 scatter file and partition images for the Homtom T7 in the firmware folder.
- Install the required MediaTek VCOM / Preloader drivers, open SP Flash Tool, and load the MT6580 scatter from the extracted directory so the tool lists system, boot, recovery, and related partitions for this device.
- Select an appropriate mode in SP Flash Tool (for example, “Download Only” for a targeted repair or “Firmware Upgrade” if recommended for this Android 5.1 generation) and double-check that only images intended for the Homtom T7 are ticked.
- Power off the phone, disconnect and then reconnect it to the PC via USB, and allow SP Flash Tool to detect it in preloader download mode and start writing the selected partitions to the MT6580 storage.
- Once SP Flash Tool reports a successful flash, disconnect the cable, boot the phone, and wait patiently for the first Android 5.1 startup, which can take longer than normal as the system optimizes apps on this low-end MT6580 hardware.
For a detailed walkthrough of SP Flash Tool usage with MediaTek devices, see: How to flash MediaTek firmware with SP Flash Tool.
Frequently Asked Questions (FAQs)
Is this firmware only for MT6580-based Homtom T7 units?
Yes. The package targets the MT6580 Homtom T7/HT7 class, and flashing it on non-MT6580 or unrelated Homtom models may cause boot failure or loss of modem functionality.
Can this ROM be flashed on a Homtom HT7 instead of T7?
Some HT7 variants also use MT6580 and Android 5.1, but builds and partition layouts differ, so only firmware explicitly matching the exact board ID and scatter should be used for each device.
Will using “Firmware Upgrade” in SP Flash Tool wipe user data?
On many MT6580 phones, “Firmware Upgrade” replaces system and related partitions and can also rewrite userdata, so a full backup of important files is recommended before flashing.
Does this mirrored ROM count as an official update for the Homtom T7?
The archive contains an original stock ROM but is hosted on a third-party mirror for preservation, so it functions as a service/recovery package rather than a new OTA-style update.
Can this firmware help fix a Homtom T7 stuck at logo after installing many heavy apps?
Reinstalling the full stock system and boot images can help recover units that became stuck at the logo because of severe software corruption or low-storage failures, provided the hardware itself is intact.
