The HomTom HT16 Pro is a MediaTek MT6737M-based Android smartphone that launched on Android 6.0 Marshmallow and uses scatter-based firmware packages for service operations. When this model encounters software issues such as bootloops after a failed OTA, soft-bricks following rooting or custom recovery, or persistent system errors, reinstalling the matching stock firmware can help restore normal boot and system stability.
The firmware package below is a full factory ROM intended for unbricking, reverting modifications, or performing a clean software restore without guaranteeing resolution of every issue.
HomTom HT16 Pro Firmware Details
| Device Name | HomTom HT16 Pro |
|---|---|
| Model Identifier | HT16 Pro (only MT6737M hardware variant) |
| Codename | Often referenced via platform tag “full_leq6737m_65_a_m0” in official builds |
| Chipset / Platform | MediaTek MT6737M, 64‑bit LTE platform using scatter-based flash layout |
| Launch Android Version | Android 6.0 Marshmallow, stock UI |
| Current Firmware Line | Official stock Android 6.0 line (e.g. builds like gf8_ht16pro_V1.1.x) |
| Typical File Size Range | Approximately 0.9–1.1 GB per full factory ROM; this package is about 998–999 MB |
| Firmware Type | Scatter-based stock ROM for SP Flash Tool (Flash Tool format) |
| Flashing Tool | SP Flash Tool (Smart Phone Flash Tool) for MediaTek devices |
| Bootloader Requirement | Standard MTK preloader mode; bootloader unlock is not typically required for flashing factory scatter ROMs via SP Flash Tool on this model |
| Region / Branch Notes | Distributed as a generic “All countries” / “Global” stock package; no separate region-specific builds are commonly listed for this device. |
⚠️ Flashing Risks & Disclaimer
Flashing this model carries specific risks related to the MT6737M platform and scatter-based firmware layout. Incorrectly writing the preloader or using a package intended for a different HomTom variant (for example, non‑Pro HT16 with MT6580) can prevent the phone from powering on or entering download mode.
On this device, using SP Flash Tool with “Format All + Download” or mismatched scatter partitions may erase NVRAM and IMEI data, which can result in loss of cellular connectivity until reprogrammed. Firmware installation should only be attempted on a correctly identified HT16 Pro MT6737M unit, with full awareness that any flashing operation involves the possibility of permanent software damage or data loss.
Download Official Firmware for HomTom HT16 Pro
| Region / Variant | Filename | Build / Version | Android Version | File Type | Build Date | File Size | Download Link |
|---|---|---|---|---|---|---|---|
| Global (MT6737M only) | Homtom_HT16_Pro_MT6737M_20170828_6.0.zip | gf8_ht16pro_V1.1.x / full_leq6737m_65_a_m0-user 6.0 (official line) | Android 6.0 Marshmallow | Scatter-based stock ROM (SP Flash Tool package) | 2017‑08‑28 (as indicated in build naming) | ≈ 998.2 MB | Download Global build (MediaFire mirror) |
This package typically extracts to a folder containing the scatter file (MT6737M_Android_scatter.txt), partition images (system, boot, recovery, userdata, etc.), and associated configuration needed by SP Flash Tool.
Flashing Requirements
- PC and OS: A Windows PC (Windows 7 or newer) with administrator access to install MediaTek VCOM/USB drivers is recommended for stable SP Flash Tool operation on this phone.
- Tools: SP Flash Tool (Smart Phone Flash Tool) compatible with MT6737M scatter firmware and the appropriate MediaTek USB drivers for preloader/DA connection.
- Bootloader and Mode: This model uses preloader/Download Mode rather than fastboot for full ROM flashing; an unlocked bootloader is usually not required when using SP Flash Tool with official factory packages.
- Data Backup: A full flash with this type of factory ROM can overwrite system, boot, and userdata partitions, which may erase installed apps, settings, and locally stored data; backing up user data and, when possible, NVRAM/IMEI before flashing is strongly recommended.
- Device Verification: Confirm that the phone is the HT16 Pro, not the standard HT16, and that it uses the MT6737M chipset; cross‑flashing MT6580 or other HomTom models with this scatter package can cause non‑boot or connection issues.
- Battery Level: Ensure at least 50% battery charge to reduce the risk of shutdown during the flashing process; sudden power loss while rewriting critical partitions can increase the chance of a hard brick.
How to Flash the Firmware
- Download and extract the package: Obtain the HomTom HT16 Pro stock ROM ZIP listed above and extract it on the PC; verify that the extracted folder contains the MT6737M scatter file (for example, MT6737M_Android_scatter.txt) and partition images.
- Prepare SP Flash Tool and drivers: Install the required MediaTek USB/VCOM drivers, then launch SP Flash Tool on Windows and load the scatter file from the extracted firmware directory so the tool can map the partitions for this device.
- Select an appropriate flash mode: In SP Flash Tool, choose a mode such as “Download Only” or “Firmware Upgrade” according to the maintenance goal; the more destructive “Format All + Download” option can erase NVRAM and should only be used with caution on this model.
- Enter preloader mode and start the flash: With the phone powered off, click “Download” in SP Flash Tool, then connect the HT16 Pro to the PC via USB (often while holding a volume key); the tool should detect the device in preloader mode and begin writing the firmware.
- Wait for completion and first boot: After SP Flash Tool displays a success message (commonly a green check mark), disconnect the cable and power on the phone; the first boot on a freshly flashed Android 6.0 stock ROM may take several minutes while the system optimizes apps and rebuilds caches.
For a detailed walkthrough of SP Flash Tool usage on MediaTek scatter firmware, refer to the following external guide: How to flash MediaTek firmware with SP Flash Tool.
Frequently Asked Questions (FAQs)
1. Can this firmware be used on the non‑Pro HomTom HT16?
No. The non‑Pro HT16 uses a different chipset (MT6580) and a separate firmware line, while this package targets the MT6737M‑based HT16 Pro; installing it on the wrong device can prevent boot or connection.
2. How can the correct model and platform be confirmed before flashing?
Check the device label, Android settings, or existing firmware information to ensure it is the HomTom HT16 Pro with an MT6737M processor; if the phone still boots, tools that read system info can also verify the SoC and build string.
3. Will flashing affect the bootloader lock state or warranty?
This type of factory scatter firmware does not inherently unlock or relock the bootloader and is usually considered a service operation, but warranty policies vary by seller and market, especially for older HomTom devices.
4. Can other regional or custom ROMs be cross‑flashed on this model?
There are custom ROMs for the HT16 Pro family, but cross‑flashing ROMs intended for different HomTom models or different MTK devices can cause missing hardware support or failure to boot; any non‑stock ROM should be evaluated carefully for MT6737M and this specific model.
5. What SP Flash Tool errors are common with the HT16 Pro?
Typical issues include DA connection timeouts, BROM errors when drivers are not installed correctly, and NVRAM-related messages if partitions have been formatted; most of these are related to driver configuration, wrong scatter selection, or cable/port problems.
6. Why does the first boot after flashing take so long?
After a clean installation, Android 6.0 on this device must initialize data partitions and optimize applications, which can extend the first boot time to several minutes without indicating a fault as long as progress continues.
