The Homtom HT17 Pro is a 5.5‑inch Android smartphone built on the MediaTek MT6737M quad‑core platform with 2 GB RAM, 16 GB storage, and Android 6.0 Marshmallow. This model can develop software issues such as bootloops after OTA or root attempts, failed custom ROM experiments, or persistent lag and network problems that require a full stock reinstall.
Installing the official MT6737M Android 6.0 R10 scatter firmware listed below can help restore the phone to factory software, unbrick soft‑bricked units, or refresh the system when OTA updates are no longer reliable.
Homtom HT17 Pro Firmware Details
| Device Name | Homtom HT17 Pro |
|---|---|
| Model Identifier | HOMTOM‑HT17PRO, firmware line such as HOMTOM‑HT17PRO‑Android_6.0‑R10‑20170614. |
| Codename | No public codename; MT6737M‑based Homtom HT17 Pro variant. |
| Chipset / Platform | MediaTek MT6737M quad‑core with Mali‑T720/T860‑class GPU. |
| Launch Android Version | Android 6.0 Marshmallow stock UI. |
| Current Firmware Line | Official Android 6.0 Marshmallow builds for HOMTOM‑HT17PRO, including R04 and the newer R10‑20170614 release. |
| Typical File Size Range | Roughly 900 MB–1.1 GB for full SP Flash Tool packages (example ZIP around 996–997 MB). |
| Firmware Type | Scatter‑based stock firmware (MT6737M_Android_scatter.txt) packaged as ZIP with images for SP Flash Tool. |
| Flashing Tool | SP Flash Tool (Smart Phone Flash Tool) for MediaTek devices. |
| Bootloader Requirement | Stock firmware typically flashes through preloader with a locked bootloader; no fastboot OEM unlock is required for standard stock restores. |
| Region / Branch Notes | Distributed as a global Android 6.0 line; R10‑20170614 is a later maintenance build compared to earlier HT17 Pro firmware and may include bug fixes and updated components. |
⚠️ Flashing Risks & Disclaimer
On MT6737M devices like the HT17 Pro, incorrectly flashing scatter firmware carries specific risks that go beyond normal factory resets. Flashing a package not built for the Homtom HT17 Pro or for a different MTK variant (for example, HT17 non‑Pro or another MT6737M phone) can cause boot failure or a state where the device is only recognized intermittently, requiring advanced repair. Writing a mismatched preloader or using “Format + Download” without a clear reason increases the chance of a deep brick in which the phone shows no signs of life and is not detected by the PC.
Stock ROM installation can erase user data, overwrite custom recovery and root, and may affect service or warranty policies depending on the reseller. Always confirm that the scatter file references MT6737M, verify that the device is indeed a Homtom HT17 Pro, and avoid disconnecting the USB cable or powering off the PC during the SP Flash Tool process.
Download Official Firmware for Homtom HT17 Pro
| Region / Variant | Filename | Build / Version | Android / Firmware Version | File Type | Build Date | File Size | Download Link |
|---|---|---|---|---|---|---|---|
| Global (HOMTOM‑HT17PRO MT6737M) | Homtom_HT17_Pro_MT6737M_R10_20170614_6.0.zip | HOMTOM‑HT17PRO‑Android_6.0‑R10‑20170614 (official stock ROM). | Android 6.0 Marshmallow stock firmware for Homtom HT17 Pro. | ZIP package with MT6737M scatter file and images for SP Flash Tool. | 14 June 2017 base build (R10 branch). | ≈ 996–997 MB (compressed ZIP). | Download Global build (MediaFire mirror) |
This firmware is intended exclusively for the Homtom HT17 Pro MT6737M and should not be used on the standard Homtom HT17 or other MT6737‑based devices.
Flashing Requirements
- PC & operating system: A Windows PC (Windows 7/8/10 or later) with administrative access for installing MediaTek drivers and running SP Flash Tool.
- Core tools: SP Flash Tool (Smart Phone Flash Tool) compatible with MT6737M, plus MTK USB VCOM/Preloader drivers so the device is recognized in flashing mode.
- Bootloader status: The HT17 Pro stock ROM is designed to flash via preloader; a standard, locked bootloader is usually sufficient, and flashing does not rely on fastboot OEM unlocking.
- Backups: Back up photos, documents, and any important application data, because “Download Only” or “Firmware Upgrade” modes often overwrite system and userdata, and formatting the whole device can clear all partitions.
- Model and scatter verification: Confirm in system settings or on the label that the phone is Homtom HT17 Pro, and ensure the firmware uses an MT6737M_Android_scatter.txt file; do not mix this package with Homtom HT17 or other models whose ROMs list different build strings such as HOMTOM‑HT17‑Android_6.0‑R16‑20170614.
- Battery charge: Maintain at least 40% battery, as this model uses a 3000 mAh pack and a power loss during preloader operations can complicate recovery.
How to Flash the Firmware
- Download the Homtom_HT17_Pro_MT6737M_R10_20170614_6.0.zip package and extract it on the PC to reveal the MT6737M_Android_scatter.txt file and associated partition images for the HT17 Pro.
- Install the required MTK VCOM/Preloader USB drivers, then open SP Flash Tool (flash_tool.exe) and use the “Scatter‑loading” button to load the MT6737M scatter file from the extracted firmware folder.
- In SP Flash Tool, select an appropriate mode such as “Download Only” for most repairs or “Firmware Upgrade” if a complete update between HT17 Pro builds (for example, earlier firmware to R10) is required, making sure only intended partitions are selected.
- Power off the phone completely, optionally remove and reinsert the battery if accessible, then click “Download” in SP Flash Tool and connect the HT17 Pro to the PC via USB so the tool can detect it in preloader mode and start flashing.
- Wait for SP Flash Tool to finish and show a green success indicator, then disconnect the cable and boot the phone; the first start after installing this Android 6.0 stock ROM can take 5–10 minutes while the system initializes and optimizes apps.
For a more detailed SP Flash Tool walkthrough tailored to MediaTek scatter firmware, see: How to flash MediaTek firmware with SP Flash Tool (flashguidehub.com).
Frequently Asked Questions (FAQs)
1. Can this firmware be used on the non‑Pro Homtom HT17?
No. The R10‑20170614 Android 6.0 package shown here targets HOMTOM‑HT17PRO with MT6737M; the standard HT17 uses its own ROM line such as HOMTOM‑HT17‑Android_6.0‑R16‑20170614 and should only be flashed with its matching firmware.
2. What issues can this HT17 Pro stock ROM realistically help resolve?
This stock Marshmallow firmware can help recover from bootloops, failed custom ROM or root attempts, persistent software lag, app crashes, and some network or radio issues caused by corrupted system partitions, as long as the underlying hardware is intact.
3. Will flashing the R10 build wipe my data?
Using SP Flash Tool with “Download Only” or “Firmware Upgrade” on the HT17 Pro may erase apps, settings, and user data depending on which partitions are included in the scatter selection, so a full backup is recommended before starting.
4. Is it safe to downgrade from a newer HT17 Pro build to R10?
Downgrading between official HT17 Pro firmware revisions is generally possible with SP Flash Tool, but changing major build branches can alter security patch levels and configuration; in rare cases this may affect behavior such as network registration or stability and should be done only when necessary.
5. Does the bootloader need to be unlocked for SP Flash Tool on MT6737M?
For this device family, SP Flash Tool connects through the preloader interface rather than fastboot, so stock firmware normally flashes successfully with the bootloader locked, as long as authentication or secure boot restrictions are not present.
6. What typical SP Flash Tool errors occur with the HT17 Pro?
Users of MT6737M devices commonly encounter BROM/DA errors due to missing drivers, faulty USB cables, or mismatched scatter files, which can usually be resolved by reinstalling MTK drivers, changing USB ports, and ensuring the firmware is specifically for the Homtom HT17 Pro.
