The HDC i6S is an iPhone 6S–style clone built on the MediaTek MT6582 platform and typically ships with Android 4.4 or Android 5.0–skinned firmware delivered as scatter‑based stock ROMs. This kind of MT6582 clone phone often encounters software issues such as bootloops after wrong ROM flashing, unstable custom firmware, or soft‑brick states when an incompatible MTK build is used.
Installing the matching HDC i6S MT6582 Android 5.0 package below can help recover the device from software corruption, restore the original OS, or perform a clean reinstall after heavy lag or failed modifications.
HDC i6S MT6582 Firmware Details
| Device Name | HDC i6S (iPhone 6S clone) |
|---|---|
| Model Identifier | HDC i6S (board ID and LCD variant may differ by batch) |
| Codename | Commonly listed simply as HDC i6S MT6582 in clone firmware catalogs |
| Chipset / Platform | MediaTek MT6582, quad‑core Cortex‑A7 with 3G modem support |
| Launch Android Version | Android 4.4–style builds on early units, with Android 5.0–based ROMs used on later revisions |
| Current Firmware Line | Android 5.0 MT6582 branch (build dated 02‑12‑2015 in this package) |
| Typical File Size Range | Approximately 450MB – 800MB for full MT6582 SP Flash Tool ROMs; this package is ~496MB. |
| Firmware Type | ZIP archive containing MT6582 scatter‑based stock ROM for SP Flash Tool |
| Flashing Tool | SP Flash Tool (Smart Phone Flash Tool) for MTK devices |
| Bootloader Requirement | Uses MT6582 preloader mode; no fastboot unlock required, but preloader must match the exact HDC i6S hardware revision. |
| Region / Branch Notes | Generic HDC clone branch; not tied to Apple regions or carriers and must not be mixed with genuine iOS IPSW firmware. |
⚠️ Flashing Risks & Disclaimer
This MT6582‑based clone relies on a specific preloader and partition layout, so flashing a mismatched scatter ROM can cause the phone to stop enumerating as a preloader device, resulting in a severe brick that may require hardware test‑point recovery. HDC i6S boards also vary between production runs, meaning that using MT6582 firmware from other HDC models or random “i6S clone” dumps can lead to issues such as no display backlight, missing touch response, or constant bootloops.
Only flash this Android 5.0 package on an HDC i6S confirmed to use MT6582 and a matching storage configuration, and avoid “Format All + Download” in SP Flash Tool unless a full NVRAM and IMEI backup already exists. Flashing stock firmware can help resolve software‑level faults but always carries risk of permanent data loss and potential device malfunction, so proceed only if comfortable with SP Flash Tool and willing to take full responsibility for the outcome.
Download Official Firmware for HDC i6S
The following entry provides the known Android 5.0 MT6582 stock ROM for this phone, delivered as a ZIP archive intended for extraction and use with SP Flash Tool.
| Region / Variant | Filename | Build / Version | Android Version | File Type | Build Date | File Size | Download Link |
|---|---|---|---|---|---|---|---|
| Global clone MT6582 | HDC_i6S_MT6582_02122015_5.0.zip | 02122015_5.0 MT6582 line | Android 5.0 (clone build) | ZIP (SP Flash Tool scatter package) | 02 December 2015 | ~495.91MB | Download Android 5.0 build (MediaFire) |
Flashing Requirements
- PC and OS: A Windows computer (Windows 7 or newer recommended) with a reliable USB port for MTK VCOM communication during preloader mode.
- Drivers: MediaTek USB VCOM / preloader drivers must be installed so the MT6582 HDC i6S is recognized when powered off and connected.
- Flashing tool: A compatible SP Flash Tool build that supports MT6582 (for example, v5.x series which explicitly lists MT6582 support).
- Bootloader / access: This phone does not use standard Android fastboot unlock; the main access path is BROM / preloader mode triggered automatically when the powered‑off device is plugged in with correct drivers installed.
- Backup recommendations: A full backup of personal files plus a readback of NVRAM/IMEI is strongly recommended, because full firmware flashes on MT6582 often wipe data and can reset modem calibration.
- Device verification: Confirm that the device is an HDC i6S with MT6582 (check with tools like CPU‑Z or previous scatter), and avoid mixing firmware for other HDC clones such as Note 3 Mini or newer MT6580/MT6735‑based models.
How to Flash the Firmware
- Download the HDC_i6S_MT6582_02122015_5.0.zip package from the link above and extract it on the PC until the MT6582 scatter file and partition images (system, boot, recovery, etc.) are visible.
- Install MediaTek USB VCOM drivers, then open SP Flash Tool and use the “Scatter‑loading” button to load the MT6582 scatter file from the extracted HDC i6S firmware folder.
- Select an appropriate mode in SP Flash Tool, typically “Download Only” for a straightforward reinstall, and ensure that “preloader” is only ticked if the ROM is known‑good for the exact HDC i6S hardware revision.
- Power off the phone completely, disconnect and reconnect the battery if removable, then click “Download” in SP Flash Tool and connect the device via USB so the MT6582 preloader is detected and the flashing process starts.
- Wait until SP Flash Tool shows a success message (often a green checkmark), disconnect the USB cable, and boot the phone; the first start after an Android 5.0 MT6582 full flash may take several minutes while the system initializes and optimizes applications.
For a detailed walkthrough of using SP Flash Tool with MediaTek scatter ROMs, see this guide: How to flash MediaTek firmware with SP Flash Tool.
Frequently Asked Questions (FAQs)
Is this HDC i6S Android 5.0 ROM compatible with genuine Apple iPhone 6S hardware?
No. This package is for an HDC clone based on the MT6582 Android platform and is completely incompatible with real iOS‑based iPhone 6S devices, which use signed IPSW firmware and Apple restore tools.
How can the chipset of this phone be confirmed before flashing?
If the device still boots, use a hardware‑info app to verify that the SoC is MT6582; if it does not boot, check any previous scatter backups or service logs from MTK tools to confirm the MT6582 platform.
Can other MT6582 HDC ROMs be flashed on this clone i6S?
Some MT6582 firmwares from other HDC models may boot, but using them risks mismatched display drivers, cameras, or sensors, so only ROMs explicitly labeled for HDC i6S are recommended.
Does this firmware fix IMEI or network registration problems?
Stock ROMs primarily restore the OS and baseband partitions; if NVRAM or IMEI is already corrupted, separate repair steps or tools are required after flashing to restore original identifiers.
What SP Flash Tool version is recommended for MT6582 devices like the HDC i6S?
Versions in the SP Flash Tool v5 line that list MT6582 support are generally preferred, as they include fixes and better compatibility for mid‑generation MTK chipsets.
Is any bootloader or OEM unlock step required for this clone?
No fastboot‑style bootloader unlock is needed; SP Flash Tool communicates directly with the MT6582 preloader/BROM layer once the correct drivers are installed.
Can this ROM be flashed from recovery without a PC?
The package is a raw SP Flash Tool ROM, not a signed update.zip, so a PC with SP Flash Tool is required; stock recovery alone cannot apply this scatter‑based firmware.
