The Comio X1 Note is a 6‑inch Full HD+ Android smartphone powered by a 1.45 GHz quad‑core MediaTek MT8735 processor, 3 GB RAM, 32 GB storage, dual 4G VoLTE, and a 2900 mAh battery, aimed at multimedia and everyday use.
The “Comio_X1_Note_MT6737T_24072018.zip” stock firmware is an official scatter ROM for the X1 Note that restores the phone to factory condition, fixing OS corruption, boot problems, malware, and stability bugs through a clean SP Flash Tool reinstallation.
Comio X1 Note Firmware Details
| Field | Details |
|---|---|
| Device Name | Comio X1 Note |
| Model Identifier | X1 Note (MT8735/MT6737T platform) |
| Chipset / CPU | MediaTek MT8735, quad‑core 1.45 GHz Cortex‑A53 |
| GPU | Mali‑T720 MP2 |
| RAM / Storage | 3 GB RAM / 32 GB internal, microSD up to 128 GB |
| Display | 6‑inch IPS LCD, 1080 × 2160 FHD+, 18:9 aspect ratio |
| Cameras | 13 MP + 5 MP rear with LED flash, 8 MP front camera |
| Battery | 2900 mAh Li‑Polymer (non‑removable) |
| Android Version | Android 8.0 Oreo (stock) |
| Firmware File Name | Comio_X1_Note_MT6737T_24072018.zip |
| Build Date | 24‑07‑2018 |
| Approx. File Size | 1.24 GB (compressed ZIP) |
| File Type | Scatter‑based MediaTek stock firmware for SP Flash Tool |
| Flashing Tool | SP Flash Tool (Windows / Linux) |
| Bootloader Status | Locked; flashing via preloader/BROM download mode |
| Target Region | Comio X1 Note units sold in India and similar MT8735 variants |
Download Official Firmware for Comio X1 Note
The table below summarizes the key information for the Comio X1 Note stock ROM so you can quickly confirm compatibility and download from a trusted cloud host.
| Filename | Region / Variant | File Size | Build Date | Build Version | Android | Flashing Type | Notes | Download |
|---|---|---|---|---|---|---|---|---|
| Comio_X1_Note_MT6737T_24072018.zip | Comio X1 Note MT8735/MT6737T, India retail units | ≈ 1.24 GB | 24 July 2018 | 2018‑07 X1 Note service build | Android 8.0 Oreo | SP Flash Tool “Download Only” / “Firmware Upgrade” | Fixes bootloop, stuck logo, soft brick, malware, and general software instability; can also revive devices after failed OTA or root experiments. | Download X1 Note 24072018 (MediaFire) |
Flashing Requirements
Prepare the following before installing the Comio_X1_Note_MT6737T_24072018.zip firmware to reduce flashing errors and protect your data.
- A Windows PC or laptop with stable power and a reliable micro‑USB cable for data transfer.
- Installed MediaTek USB VCOM/Preloader drivers so the Comio X1 Note is detected in BROM/Download mode.
- Latest compatible SP Flash Tool and the extracted Comio_X1_Note_MT6737T_24072018 firmware folder (fully unzipped).
- Comio X1 Note handset with at least 60–70% battery to prevent shutdown during flashing.
- Backups of personal files (photos, contacts, documents) and, where possible, a technician‑level backup of NVRAM/IMEI and important partitions before using any format option.
How to Flash the Firmware
The X1 Note ROM is a standard MediaTek scatter package, so it is flashed using SP Flash Tool on a PC.
Quick steps – SP Flash Tool (Comio X1 Note)
- Install MTK USB drivers on your PC, then extract both SP Flash Tool and Comio_X1_Note_MT6737T_24072018.zip into separate folders.
- Open SP Flash Tool, load the scatter file from the firmware folder, and select either “Download Only”/“Firmware Upgrade” for standard repair or more advanced modes only if partitions are badly corrupted.
- Turn off the Comio X1 Note completely and connect it to the PC via USB (often while holding Volume Up or Volume Down) so the tool detects it in preloader/BROM mode.
- Click the Download button in SP Flash Tool and wait for the progress bar to complete; do not disconnect the cable until a green success tick appears.
- Unplug the phone and long‑press the Power key to boot; the first startup after flashing can take several minutes while Android rebuilds and optimizes apps.
For a full, illustrated SP Flash Tool tutorial that applies to Comio X1 Note and other MTK devices, use this step‑by‑step guide: How to flash stock firmware to MediaTek (MTK) smartphones. Combine that guide with the Comio_X1_Note_MT6737T_24072018.zip download above for safe, repeatable results.
Frequently Asked Questions (FAQs)
What issues does this Comio X1 Note firmware fix?
This stock ROM is designed to repair bootloop or stuck‑logo problems, random reboots, severe lag, missing system apps, malware‑infected systems, and failures after bad root or custom ROM attempts. It can also restore overall stability and performance when the device becomes glitchy due to long‑term use or incomplete OTA updates.
Is this ROM compatible with every Comio X1 Note?
The Comio_X1_Note_MT6737T_24072018.zip firmware targets the standard X1 Note with a 6‑inch FHD+ display, MediaTek MT8735 chipset, 3 GB RAM, and 32 GB storage sold mainly in India. It must not be used on the smaller Comio X1 (5.5‑inch HD+) or any other Comio model, as cross‑flashing may permanently brick the device.
Can this firmware update my Android version beyond Oreo?
No, this Comio X1 Note build re‑installs the official Android 8.0 Oreo software that originally shipped with the phone, with stability and bug‑fix patches from mid‑2018. It is meant for repair and restoration, not for upgrading to newer Android generations such as Pie or later.
