Are you experiencing frustrating issues on your WE A10 smartphone such as unresponsive network, persistent boot loops, sensor failures, or lagging interface? WE A10 users have reported frequent network signal problems, difficulties with system stability, and dead phones after unsuccessful firmware updates. These issues often appear after firmware corruption or interrupting an update, leaving the device stuck or unable to boot.
The official SPD firmware below fixes common network dropouts, improves sensor accuracy, and restores smooth system operation, helping users recover from most software-related disasters.
WE A10 HW1 SW7 Firmware Details
| Device Name | WE A10 |
| Model | HW1 |
| Chipset | Spreadtrum / UNISOC |
| Android Version | Reported: 7.0 (Check Device Before Flash) |
| Firmware Version | SW7_23082018 |
| Build Date | 23 August 2018 |
| File Size | 676MB |
| File Type | Compressed Zip (SPD Flash File) |
| Flashing Tool | SPD Upgrade Tool |
| Other Info | Official Factory ROM. Restores network, fixes boot, restores sensors, improves performance |
Warning: The WE A10 can become permanently stuck in boot or lose critical IMEI/NVRAM data if interrupted during flashing or if the wrong firmware is used. User feedback shows that security and sensor functionality may also fail with mismatched ROMs. Check your exact hardware version (HW1) before proceeding and always use a reliable USB cable with a laptop that won’t shut down mid-process.
Download Official Firmware for WE A10 HW1
Get the tested official firmware for WE A10 HW1 (SW7_23082018) below. This version restores dead or bricked devices, fixes missing network signals, and resolves slow or stuck performance:
- 📄 Filename: WE_A10_HW1_SW7_23082018_SPD.zip
- 📦 Size: 676MB
- 🗓️ Build Date: 23 Aug 2018
- 🔢 Build Version: SW7_23082018 (HW1 Only)
- 🤖 Android Version: 7.0 (user should confirm before flashing)
- ⬇️ Download Link: MediaFire
This firmware optimizes device stability, restores sensor and network function, and can fully unbrick most WE A10 HW1 models.
How to Flash the Firmware
Follow these 5 quick steps to flash WE A10 HW1 firmware with SPD Upgrade Tool:
- Download and extract the firmware zip to your PC.
- Install Spreadtrum USB drivers and launch SPD Upgrade Tool.
- Load the PAC file from the extracted folder in SPD Tool.
- Connect powered-off phone via USB and click ‘Start’ in SPD Tool.
- Wait for completion; disconnect phone and restart. First boot may take several minutes.
For the full illustrated step-by-step tutorial, see this SPD Upgrade Tool flashing guide.
