Verykool T7445 Firmware Flash File Download [Stock Rom]

Download free stock firmware files, compare available builds, and use the matching flash guide before writing anything to the phone.

Before you flash

Match the exact model, region, and branch name. Similar model numbers are not the same device.

Need flashing steps?

Firmware files are here on Inar Guide. Tutorials, flash tools and USB drivers are on FlashGuideHub.

The Verykool T7445, powered by Mediatek MT6580 and Android 7.0, is a 7-inch tablet with basic hardware intended for light browsing and social use. Frequent issues include bootloop after failed updates, system lag and slow response, Wi-Fi not connecting, camera freezing, battery draining quickly, and device bricked due to flashing or reset errors. The official stock firmware (Verykool_T7445_MT6580_26052017_7.0.zip) solves boot problems, restores dead/bricked tablets, repairs major bugs and brings back lost network/IMEI. Flashing verified firmware is required for fixing startup failure, reboots and poor performance.

Verykool T7445 Firmware Details

Device Name Verykool T7445
Chipset MediaTek MT6580 (quad-core 1.3GHz)
OS Android 7.0 Nougat
RAM & Storage 1GB RAM, 8GB storage (microSD up to 64GB)
Display 7.0″ TFT, 600×1024 px
Camera Rear 5MP, Front 2MP
Battery 2500mAh Li-Po
Firmware File Name Verykool_T7445_MT6580_26052017_7.0.zip
Build Date May 26, 2017
File Size 1.1GB
File Type ZIP, scatter (MT6580/6580M)
Flashing Tool SP Flash Tool (MediaTek)

Warning: Flash only T7445 MT6580 scatter files. Wrong region, missing drivers or faulty auth can brick the tablet or lose network/IMEI. Always backup data before flashing.

Download Official Firmware for Verykool T7445

Verykool_T7445_MT6580_26052017_7.0.zip
📦 Size: 1.1GB
🗓️ Build Date: May 26, 2017
🔢 Firmware Version: MT6580 Android 7.0
⬇️ Download Link: Mediafire
Repairs bootloop, bricked device, restores system, camera, and network.


How to Flash the Firmware

  • Install MediaTek USB/VCOM drivers on your PC.
  • Extract the ZIP, open SP Flash Tool, and load scatter file from extracted firmware.
  • Connect device powered off (Vol Down if needed), click Download.
  • Do not unplug during flash. Wait for green check.
  • On reboot, set up system and restore IMEI/backups if lost.

Step-by-step SP flash guide: SP Flash Tool how-to

MediaTek device flashing guides:

SP Flash Tool: SP Flash Tool


Disclaimer: Wrong scatter/auth or driver errors will brick the tablet or lose IMEI/network. Confirm device and backup all files first. Comment below for help if needed.

Be the First to Comment