The Positivo Twist 2 Pro S532 is an entry-level Android phone with a UNISOC SC7731e chipset, designed for everyday calls and basic apps. User complaints center on frequent bootloops after OTA or failed app installs, “no SIM” or IMEI errors, general sluggishness, and the phone being totally unresponsive after improper resets. Stock ROM (like Positivo_Twist_2_Pro_S532_20200108_SPD.zip) will recover bricked phones, fix persistent lag, and restore lost IMEI/network where possible. Using the official firmware resets the device to factory stability and resolves nearly all system bugs—especially boot or Wi-Fi failure and dead/reboot errors.
Positivo Twist 2 Pro S532 Firmware Details
| Device Name | Positivo Twist 2 Pro |
|---|---|
| Model | S532 |
| Chipset | UNISOC SC7731e (SPD/Spreadtrum 28nm quad-core 1.3GHz) |
| RAM & Storage | 1GB RAM, 32GB storage (MicroSD up to 64GB) |
| Display | 5.0″ IPS LCD, 480×960 px, 18:9 |
| Camera | 8MP rear, 5MP front |
| Battery | 2500 mAh Li-Ion |
| Operating System | Android 8.1.0 Oreo Go Edition |
| Firmware Filename | Positivo_Twist_2_Pro_S532_20200108_SPD.zip |
| Firmware Version | 20200108 SPD Official |
| File Size | 799MB |
| File Type | ZIP (PAC format, for SPD Tool) |
| Flashing Tool | SPD Research/Upgrade Tool (Spreadtrum/UNISOC Flash Tool) |
Warning: Flash only S532 or SC7731e/correct-version files. Wrong firmware or unsupported tool will brick the device or erase IMEI/SIM network. Always backup data and use compatible drivers.
Download Official Firmware for Positivo Twist 2 Pro S532
Positivo_Twist_2_Pro_S532_20200108_SPD.zip
📦 Size: 799MB
🗓️ Build Date: Jan 8, 2020
🔢 Firmware Version: SPD/UNISOC Official
⬇️ Download Link: Google Drive
Used for dead phone, bootloop, lag, IMEI/signal recovery, and system bugs.
How to Flash the Firmware
- Download and extract the ZIP; install SPD/UNISOC USB/ADB drivers.
- Launch SPD Research/Upgrade Tool and load the included.pac file.
- Connect the powered-off phone (hold Vol Down or Up if needed), click “Start” to flash.
- Do not unplug until operation is 100% complete (watch for green check mark).
- On first boot, complete Android setup and restore data from backup if needed.
For detailed flashing manuals with screenshots and video: SPD/UNISOC flash tool guide here.
Guides for SPD/UNISOC devices:
SPD Devices (SPD Tool): SPD Flash Tool
