Match the exact model, region, and branch name. Similar model numbers are not the same device.
Firmware files are here on Inar Guide. Tutorials, flash tools and USB drivers are on FlashGuideHub.
The Kimfly M13 is a budget Android phone prone to issues like bootloop, being stuck at logo, crashing apps, dead device after failed updates, or invalid IMEI/network loss after malware or improper flashing. Flashing the official Kimfly M13 firmware is the safest way to recover a bricked or frozen phone, fix persistent bugs, and restore factory stability—even if all other soft resets fail.
This firmware file is SPD-tested and installs via SPD Upgrade Tool. It resolves device hang, blackout, unresponsive touchscreen, faulty sensors, camera errors, FRP lock, or failed OTA update. Flashing will restore your M13’s performance and clear system bugs.
Kimfly M13 Firmware Details
| Device Name | Kimfly M13 |
| Model | M13 |
| Chipset | Spreadtrum/Unisoc SC7731C, Quad-core 1.3GHz |
| GPU | Mali-400 |
| Android Version | Android 6.0 Marshmallow |
| RAM / Storage | 1GB RAM / 8GB ROM, microSD up to 32GB |
| Display | 5.0-inch FWVGA, 480×800 pixels |
| Camera | Rear: 5MP (LED), Front: 2MP |
| Battery | 2800mAh (removable) |
| SIM | Dual SIM (Micro) |
| Firmware Version | V2.0_20170620_6.0 |
| Build Date | June 20, 2017 |
| File Size | 768MB |
| File Type | ZIP (PAC file included) |
| Flashing Tool | SPD Upgrade Tool (ResearchDownload) |
| Region | Global |
⚠ Warning: Use this firmware only on Kimfly M13 with matching chipset/version. Flashing with the wrong file or interruptions can brick the phone, wipe IMEI, or cause network loss. Always back up all data—flashing wipes storage completely.
Download Official Firmware for Kimfly M13
Use this tested firmware to revive:
- Bootloop, stuck logo, and black screen
- Unresponsive or dead devices after malware/flashing
- IMEI, network, or camera/sensor failures
- FRP lock or Google login errors after reset
📄 Filename: Kimfly_M13_V2.0_20170620_6.0.zip
📦 Size: 768MB
🗓️ Build Date: June 20, 2017
🔢 Firmware Version: V2.0_20170620_6.0
🤖 Android Version: 6.0 Marshmallow
⬇️ Download Link: Google Drive (Direct Download)
How to Flash the Firmware
To flash Kimfly M13 firmware with SPD tool:
- Extract the ZIP and install Spreadtrum drivers plus SPD Upgrade Tool on your PC.
- Launch SPD Upgrade Tool and load the included PAC file.
- Switch off your device, then connect to PC while holding Volume Down (if prompted).
- Click “Start” in SPD Upgrade Tool, and wait for the green success message.
- Disconnect and reboot when flash completes.
See a full flashing walkthrough with images at this SPD flash guide.